A mono-control operating system for the control of water to a single urinal, incorporating a mono control module, 'no-touch' sensor and a solenoid valve.

Operation:

• When the sensor is activated, if the pre-flush option has been selected, there will be an approximate 2 second delay and 2 second pre-flush.

• When there has been 5 seconds of inactivity the flush is activated for the duration selected (3 - 10 seconds in 1 second intervals).

• The solenoid valve is supplied complete with an integral isolator and filter.

Flush timing:

• The system provides an optional pre-flush of 2 seconds if a human body is detected, and then initiates a flush cycle after use.

• Flush duration can be pre-set between 3 and 10 seconds in increments of 1 second, by the adjustment of the integral timing dial.

• A duty flush is incorporated, every 24 hours after use.

Materials:

• Sensor: Chrome plated durable engineering plastic with shatterproof plastic sensing window.

• Solenoid valve: Fibreglass polyamide body.

Pressure:

• Solenoid valve: 0.20 - 10 bar.

Electrical:

• Sensor protection class: Electronic module IP65.

• Supply voltage: 12V AC + 10% 50/60Hz, via Rada Universal 12V AC transformer (not included).

• Power consumption: 6 VA.

Operating temperatures:

• Ambient temperature range: 5–40°C.

• Maximum humidity: 80%.

Accessories:

• Rada Universal 12V AC Transformer.

Manufacturer