KONE plc

NBS Plus
RIBA CPD
Tel +44 (0)8451 999 999, www.kone.co.uk
Global House, Station Place, Fox Lane North, Chertsey, Surrey, KT16 9HW

Product overview

Automatic Sliding Door Operator

Automatic Sliding Door Operator

Product in NBS

An important note about specifying

The product information below is from the NBS Plus library of product clauses offered in NBS specification products. It has been created by NBS for KONE plc. Each product clause is authored in NBS format and is intended for inclusion in project specifications. Please note that NBS product guidance is not a replacement for the manufacturer's literature and it is recommended that KONE plc be consulted before specifying.

To find out more about producing specifications for building projects visit www.theNBS.com/solutions

Detailed description

Automatic sliding door operator suitable for all commercial environments facilitating efficient and safe people flow. Manufactured from aluminium with 160 mm high rail, supplied with an integrated running rail, clamped in low noise rubber and a control unit, motor and carriers. Adjustable door speed, time and width via control unit.

Features

  • Electronic safety reverse, highly sensitive reverse settings in both open and close directions.
  • Finger trap safety.
  • Door speed safety, automatically adjusted based on door weight and resistance.
  • Fire alarm functions, door closes while the photocell is switched off and radar sensor remains active, manual operation and sequence doors setting can be cancelled.
  • Electronic lock activated by the program switch.
  • Battery backup an option in case of power failure.

TUV approved and meets all the international CE standards and safety regulations.

Standard product features

Suspension

Two 3D adjustable carriers per door leaf.

Power

230 V, 50 Hz, 2 A, single phase, 80 W.

Control unit

Computerized self monitoring.

External connectors

Four programmable inputs and one programmable output.

Draught prevention

Totally sealed with brushes and rubber gaskets.

Options

Product reference

SD 20S

  • Tight, round and slim view design suitable for single, double and telescopic doors with toughened glass 10 or 12 mm thick.
  • Opening (w x h, maximum): 1400 single door, 2200 double door x 2300–2500 mm, depending on glass thickness.

SD 35S

  • Tight, round and slim view design suitable for single, double, telescopic and prismatic doors with laminated, isolated and toughened glass 8–20 mm thick.
  • Opening (w x h, maximum): Varies dependant on glass type, please refer to manufacturer's literature for exact details.

SD Full glass

  • Slim view design suitable for single and double doors with toughened glass 10 or 12 mm thick.
  • Opening (w x h, maximum): 1400 single door, 2200 double door x 2200–2400 mm, depending on glass thickness.

NBS Specification

This product is associated with the following NBS clauses:

Product specification

Manufacturer

- Name:

KONE plc

- Tel:

+44 (0)8451 999 999

Product reference

[SD 20S]
[SD 35S]
[SD Full glass]
 

Type

[Double sliding door]
[Double sliding door with side or fixed panels]
[Single telescopic door]
[Curved sliding door]
[Prismatic sliding door]
 

Cover

[Aluminium, mill finish]
-
Standard.
[Anodized aluminium, RAL]
-
Insert details.
[Silver anodized aluminium]
 

Operation

[Electronic program switch]
[Electronic program switch with LED display]
[Entrance control system]
[Infrared motion detector]
[Photo cells]
[Push button]
[Radar detector 1 way]
[Radar detector 2 way]
[Safety sensors]
[Wireless program switch]
 

Accessories

[None]
[Battery back-up]
[Eco Drive]
-
To reduce warm or cold air loss and reduce temperature oscillations in buildings.
[External connectors with four inputs and four outputs]
[Fire alarm functions]
 

Contact details

Global House,
Station Place,
Fox Lane North,
Chertsey,
Surrey, KT16 9HW
Tel +44 (0)8451 999 999
Fax +44 (0)870 770 1144

Alternative contacts

Basingstoke
Tel +44 (0)1256 374545
Belfast
Tel +44 (0)28 9031 2180
Glasgow
Tel +44 (0)141 554 7604
Keighley
Tel +44 (0)1535 662841
London
Tel +44 (0)20 7622 6644
select

Want to ask a question?

Contact KONE plc