Home > Companies > Newton Waterproofing Systems Ltd > Newton NP750 Ranger Sewage Pump

A low head and high performance sewage pump for the removal of sewage, effluent, waste water and ground water with suspended soft solids of up to 50 mm.

Features:

  • Float that cannot be fouled by hardened soaps, effluent and grease.
  • Fluid temperature range: 0–40 °C.
  • Open impeller pump design.
  • Single phase power supply.

Options

Power converter:

Units that receive 12 V power from a deep cycle leisure battery and converts this into 230 V mains power to ensure that the Newton Pump continues to operate even during a power outage. A two phase charger ensures that the battery is fully charged at all times by trickle charging to keep the battery at optimal charge and then by boosting up to 20 A to quickly recharge the battery after extended use.

Control panel:

The panel features interface for use with Newton power back-up and telemetry systems as well as connections to whole house alarm and monitoring systems. The control panel PCB is split with two separate circuits, ensuring that pumping will continue even if one of the control circuits should fail.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
90-05-75/320 Private packaged pumping stations

Product specification

An important note about specifying

Manufacturer

Name:

Newton Waterproofing Systems Ltd

Tel:

+44 (0)1732 360095

Product reference

[Ranger 10/50 0.75 kW 2" Sewage Automatic Pump]
[Ranger 10/50 1.1 kW 2" Sewage Automatic Pump]
[Ranger 10/50 MC 0.75 kW 2" High Head Automatic Pump]
[Ranger 10/50 MC 1.1 kW 2" High Head Automatic Pump]

Power converter

[1200 W (C1)]
-
Battery back-up facility for pumps of 150 W and 400 W.
[1200 W (C3)]
-
As C1, including a 115 A/H deep cycle leisure battery, a secure battery box, and the power leads for connection to the mains and the battery.
[3000 W (C2)]
-
Used with single pumps with power outputs of up to 750 W only or with dual pumps of 400–750 W when switched by a Newton Control Panel.
[3000 W (C4)]
-
As C2, including a 115 A/H deep cycle leisure battery, a secure battery box, and the power leads for connection to the mains and the battery.

Control panel

Newton Control Panel Pro (CP2) - Supplied with a vertical water level float switch and water high alarm float switch. Insert number of standby batteries required.

Text and speech dialler

[Not required]
[Required]
-
Can send either text or voice messages to up to five designated phones should an alarm condition occur.

Manufacturer details

Newton House,
17-19 Sovereign Way,
Tonbridge,
Kent, TN9 1RH
Tel +44 (0)1732 360095
Fax
NBS Plus
RIBA CPD