The product information below is from the NBS Plus library of product clauses offered in NBS specification
products. It has been created by NBS for Britmet Tileform Ltd. Each product clause is authored in NBS format
and is intended for inclusion in project specifications. Please note that NBS product guidance is not a
replacement for the manufacturer's literature and it is recommended that Britmet Tileform Ltd be consulted
To find out more about producing specifications for building projects visit
Traditional slate tile effect roof panel with acrylic resin base coat and stone granules with clear acrylic overglaze top coat. Designed to give a traditional tile appearance. Good vandal resistance (0.9 mm steel base).
Roofing underlay is required and should comply with recommendations of BS 5534–1:1997 and BS 8000.
Guaranteed for forty years against weather penetration.
Unaffected by normal pollution.
Non toxic fungicide incorporated.
AA classification equal to traditional roof tiles and slates.
One standard colour available, other special colour available on request.
Britmet Tileform Ltd
+44 (0)1295 250998
• Manufacturer: Britmet Tileform Ltd
- Web: www.britmet.co.uk
- Email: firstname.lastname@example.org
- Tel: +44 (0)1295 250998
- Fax: +44 (0)1295 271068
- Address: Spital Farm Offices, Thorpe Mead, Banbury, Oxfordshire OX16 4RZ
Product reference: Slate 2000
Steel base: 0.45 mm /0.9 mm
Colour: Brindle /Titanium grey /Bramble brown/ Tartan green /Rustic terracotta
Accessories: None /Angle ridge P /Barge board, left hand /Barge board, right hand /Cover /Eaves apron /Eaves OVF25 vent /Gas vent ridge /GRP valley /Mono ridge /Ridge barrel and end cap /Ridge vent strip /Stepped barge, left hand /Stepped barge, right hand /Vent tile