Doorsets
NorDan UK Ltd
NorDan House
Green Farm Business Park
Falcon Close
Quedgeley
Gloucestershire
GL2 4LY
Tel: +44 (0)1452 883131
Fax: +44 (0)1452 883739
Email: info@nordan.co.uk
Website: www.nordan.co.uk
Contact: Matt Collins
rps no: 9842
NorDan doorsets featured here are from the NTech 0.7 and 1.2 ranges of timber and aluminium clad timber doors which offer
inward, outward opening and sliding doorsets.
Introduction NorDan has been
combining traditional Norwegian
craftsmanship with modern
technology for over 40 years.
NTech 0.7 Balcony doorset
(outward opening, single)
Description The NTech 0.7
doorset offers a sustainable,
energy-saving design and there is a
wide choice of design specifications.
Doorsets are supplied complete and
operational with an exterior frame
and pre-hung door leaf. Handles
and cylinder sets are supplied loose;
all other ironmongery is pre-fitted.
Four pairs of heavy-duty hinges are
incorporated.
Espagnolette locking has three
tightening points, one throw bolt and
one sprung latch.
Specific options comprise:
- Anti-bump security cylinders and
thumbturns
- Kick-plates
Composition, manufacture
A layer of insulation is laminated
into the 105 mm deep frame for the
head and jambs. The 80 mm door
leaf has insulation laminated all
round. Timber is double vacuum
impregnated.
Triple-glazed units are fitted as
standard, with other glazing options
available.
Dimensions (mm)
Min./max. width
588/1088
Min./max. height 1588/2388
Max. width + height 3476
NTech 1.2 Sliding patio doorsets
(single and double)
Description A typical sliding
doorset comprises opening and
fixed leaves of equal size with
a meeting rail centrally positioned.
However, NorDan can provide doors
with unequal leaves and double
sliding doors without a central
mullion. A secondary locking device
on the fixed mullion provides:
- Increased resistance against
forced entry
- Additional tightening where the
fixed and sliding doors meet to
avoid weather penetration
- Resistance to timber movement
Specific options comprise:
- Locking handles
- Trickle vents
- Anti-bump security locking
cylinders and thumbturns
NorDan UK Ltd
Composition, manufacture
Double-glazed units are fitted as
standard, with other glazing options
available.
The sliding door has sealed roller
bearings which glide smoothly on a
hardened aluminium alloy track and
are fitted with alloy anti-lift discs
located in the frame head. These
prevent intruders from lifting the
sliding door off its track.
Dimensions (mm) Single Double
Min. width
1388
2788
Max. width
3988
7988
Min. height
1588
1788
Max. height
2388
2388
Max. width + height 6376
10376
NTech 1.2 Balcony doorsets
(inward and outward opening,
single and double)
Authority Outward opening
doorsets are Secured by Design
and the subject of BBA Cert.
07/4476.
Description There is a wide variety
of design specifications. Doorsets
are supplied complete and
operational with an exterior frame
and pre-hung door leaf. Handles
and cylinder sets are supplied loose;
all other ironmongery is fitted.
Three heavy duty hinges are fitted
with an additional hinge providing
extra stability for larger and heavier
units and specific requirements.
The door is opened by means of a
single handle operating an
espagnolette with three tightening
points, one throw bolt and one
sprung latch.
Specific options comprise:
- Wind brake friction stay on
outward opening primary door
only, which are profiled to enable
retrospective fitting
- Anti-bump security locking
cylinders and thumbturns
- Letterplates
- Spyholes
- Kick-plates
Composition, manufacture The
92 mm deep frame is constructed
from engineered timber. The timber
for both frame and door is double
vacuum impregnated.
Double-glazed units are fitted as
standard, with other glazing options
available.
Dimensions (mm) Single Double
Min. width
688
1088
Max. width
1088
1988
Min. height
1588
1588
Max. height
2388
2388
Max. width + height 3476
4376
®
Registered Trademark
INFORMATION COMMON TO
NTech doorsets
Authority NTech doorsets are
CE marked for EN 14351-1 + A1.
Timber is sourced from PEFC
certified sources. Manufacture is
quality assured to ISO 9001.
Description Doors may be used as
fire escapes and may have optional
aluminium cladding that increases
the life-span of the glazing and
reduces maintenance costs.
Standard panels are of laminate
composite board; optionally, pine
veneer panels may be used where a
stained finish is specified.
Where fitted, double-glazed units
comprise 4 mm low emissivity
toughened glass/16 mm argon filled
cavity/ES 6.38 mm laminated safety
glass and triple-glazed units
comprise 4 mm toughened low
emissivity glass/16 mm argon filled
cavity/4 mm low emissivity glass/
16 mm argon filled cavity/
ES 6.38 mm laminated glass.
Both incorporate warm edge
technology in the spacer bars.
All NTech doorsets have as options:
- Transoms and mullions
- Side lights and fan lights
Dimensions For glazed doors, size
limitations depend on the weight of
the glazing: further information is
available from the company.
Appearance Doorsets, optionally,
and cladding can be powder-coated
from any colour in the classic RAL
range.
REFERENCES
Further information on testing to
PAS tests 23 and 24, warranties,
supply of products and services to
specifiers including a special
contractor service and other product
information is available on the
company's website.
Information on NTech window
systems is in Section (31.4) of this
edition of the RIBA Product
Selector.