Home > Companies > Knauf
NBS Plus
The product information below is from the NBS Plus library of product clauses offered in NBS specification products. It has been created by NBS for Knauf. Each product clause is authored in NBS format and is intended for inclusion in project specifications. Please note that NBS product guidance is not a replacement for the manufacturer's literature and it is recommended that Knauf be consulted before specifying.

To find out more about producing specifications for building projects visit www.theNBS.com/solutions
146 mm 'C' stud high performance twin frame partition
Twin stud partition based on 146 mm 'C' stud.
K10 Plasterboard dry linings/ partitions/ ceilings
 
146 mm independent 'I' stud
An independent lining system based on 146 mm thick 'I' studs.
K10 Plasterboard dry linings/ partitions/ ceilings
 
50 mm independent 'I' stud
An independent lining system based on 50 mm thick 'I' studs.
K10 Plasterboard dry linings/ partitions/ ceilings
 
60 mm 'I' staggered partition
Staggered stud partition based on 60 mm 'I' stud.
K10 Plasterboard dry linings/ partitions/ ceilings
 
60 mm independent 'I' stud
An independent lining system based on 60 mm thick 'I' studs.
K10 Plasterboard dry linings/ partitions/ ceilings
 
70 mm independent 'I' stud
An independent lining system based on 70 mm thick 'I' studs.
K10 Plasterboard dry linings/ partitions/ ceilings
 
92 mm 'C' stud high performance twin frame partition
Twin stud partition based on 92 mm 'C' stud.
K10 Plasterboard dry linings/ partitions/ ceilings
 
92 mm 'I' staggered partition
Staggered stud partition based on 92 mm 'I' stud.
K10 Plasterboard dry linings/ partitions/ ceilings
 
92 mm independent 'I' stud
An independent lining system based on 92 mm thick 'I' studs.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Aquapanel
Drywall system for fully or partially tiled partitions.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Aquapanel Cement Board Outdoor
Cement board with a Portland cement and aggregate core.
H20 Rigid sheet cladding
 
Document Thumbnail
Brio Dry Floor Screed System
A dry screed board system for new or existing floors.
K11 Rigid sheet flooring/ sheathing/ decking/ sarking/ linings/ casings
 
Document Thumbnail
C-Form I ceiling system
Suspended ceiling system for large areas, wide spans or deep ceiling voids.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
C-Form II ceiling system
Suspended ceiling system for areas less than 50 m² with spans less than 4 m.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Cotton scrim
Cotton reinforcement for use with plasters.
M20 Plastered/rendered/roughcast coatings
 
Document Thumbnail
Direct bonding system
Lining system based on direct bonding of plasterboard to a substrate.
K10 Plasterboard dry linings/ partitions/ ceilings
 
FB Batts
P12 Fire stopping systems
 
FB Expanding Foam
A fire rated polyurethane expanding foam providing up to 2 hours fire resistance - tested to BS 476:Part 20/22.
P12 Fire stopping systems
 
FB Fire Collars
P12 Fire stopping systems
 
Document Thumbnail
FB Intumescent Mastic
P12 Fire stopping systems
 
FB Pillows
P12 Fire stopping systems
 
FB Silicone
P12 Fire stopping systems
 
Document Thumbnail
Framed encasement system
Encasement system for columns, beams and other structural steelwork.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Futurepanel
A carbon neutral plasterboard that has the same performance as Knauf Wallboard.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Gitex high strength glass fibre reinforcement
Reinforcement for plaster, which strengthens apertures or weak areas.
M20 Plastered/rendered/roughcast coatings
 
Goldblend Plaster
A one coat plaster designed for hand application.
M20 Plastered/rendered/roughcast coatings
 
Document Thumbnail
Metal furring system
A dry-lining system based on metal furrings.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
MF ceiling system
Lightweight suspended ceiling system.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
MP Finish
A high quality finish plaster designed for fast spray application.
M20 Plastered/rendered/roughcast coatings
 
Document Thumbnail
MP75 Projection Plaster
A one coat projection plaster that provides a tough and durable white surface.
M20 Plastered/rendered/roughcast coatings
 
Multicover Plaster
A multi-finish plaster suitable for plasterboards.
M20 Plastered/rendered/roughcast coatings
 
Document Thumbnail
Plaster Angle Bead
Galvanised steel corner protection for external corners of drywall partitions.
M20 Plastered/rendered/roughcast coatings
 
Pro-Board Finish
A high performance plaster for application to the ivory face of plasterboard.
M20 Plastered/rendered/roughcast coatings
 
Projection Plaster
A one coat plaster designed for machine application.
M20 Plastered/rendered/roughcast coatings
 
Roomform partition and Roomform quiet partition
Non-loadbearing internal partitions for domestic projects.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Separating wall partition
Twin 'C' stud partition for separating walls between dwellings.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Shaftwall 146 mm stud
A versatile system for forming enclosures around service shafts and lift shafts.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Shaftwall 60 mm stud
A versatile system for forming enclosures around service shafts and lift shafts.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Shaftwall 92 mm stud
A versatile system for forming enclosures around service shafts and lift shafts.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 146 mm 'C' stud with 12.5 mm plasterboard
Drywall partition with 146 mm 'C' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 146 mm 'C' stud with 15 mm plasterboard
Drywall partition with 146 mm 'C' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 146 mm 'C' stud with two layers of 12.5 mm plasterboard
Drywall partition with 146 mm 'C' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 146 mm 'C' stud with two layers of 15 mm plasterboard
Drywall partition with 146 mm 'C' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 146 mm 'I' stud with 12.5 mm plasterboard
Drywall partition with 146 mm 'I' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 146 mm 'I' stud with 15 mm plasterboard
Drywall partition with 146 mm 'I' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 146 mm 'I' stud with two layers of 12.5 mm plasterboard
Drywall partition with 146 mm 'I' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 146 mm 'I' stud with two layers of 15 mm plasterboard
Drywall partition with 146 mm 'I' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 50 mm 'C' stud with 12.5 mm plasterboard
Drywall partition with 50 mm 'C' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 50 mm 'C' stud with 15 mm plasterboard
Drywall partition with 50 mm 'C' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 50 mm 'C' stud with two layers of 12.5 mm plasterboard
Drywall partition with 50 mm 'C' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 50 mm 'C' stud with two layers of 15 mm plasterboard
Drywall partition with 50 mm 'C' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 50 mm 'I' stud with 12.5 mm plasterboard
Drywall partition with 50 mm 'I' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 50 mm 'I' stud with 15 mm plasterboard
Drywall partition with 50 mm 'I' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 50 mm 'I' stud with two layers of 12.5 mm plasterboard
Drywall partition with 50 mm 'I' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 50 mm 'I' stud with two layers of 15 mm plasterboard
Drywall partition with 50 mm 'I' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 60 mm 'C' stud with 12.5 mm plasterboard
Drywall partition with 60 mm 'C' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 60 mm 'C' stud with 15 mm plasterboard
Drywall partition with 60 mm 'C' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 60 mm 'C' stud with two layers of 12.5 mm plasterboard
Drywall partition with 60 mm 'C' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 60 mm 'C' stud with two layers of 15 mm plasterboard
Drywall partition with 60 mm 'C' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 60 mm 'I' stud with 12.5 mm plasterboard
Drywall partition with 60 mm 'I' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 60 mm 'I' stud with 15 mm plasterboard
Drywall partition with 60 mm 'I' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 60 mm 'I' stud with two layers of 12.5 mm plasterboard
Drywall partition with 60 mm 'I' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 60 mm 'I' stud with two layers of 15 mm plasterboard
Drywall partition with 60 mm 'I' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 70 mm 'C' stud with 12.5 mm plasterboard
Drywall partition with 70 mm 'C' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 70 mm 'C' stud with 15 mm plasterboard
Drywall partition with 70 mm 'C' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 70 mm 'C' stud with two layers of 12.5 mm plasterboard
Drywall partition with 70 mm 'C' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 70 mm 'C' stud with two layers of 15 mm plasterboard
Drywall partition with 70 mm 'C' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 70 mm 'I' stud with 12.5 mm plasterboard
Drywall partition with 70 mm 'I' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 70 mm 'I' stud with 15 mm plasterboard
Drywall partition with 70 mm 'I' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 70 mm 'I' stud with two layers of 12.5 mm plasterboard
Drywall partition with 70 mm 'I' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 70 mm 'I' stud with two layers of 15 mm plasterboard
Drywall partition with 70 mm 'I' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 92 mm 'C' stud with 12.5 mm plasterboard
Drywall partition with 92 mm 'C' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 92 mm 'C' stud with 15 mm plasterboard
Drywall partition with 92 mm 'C' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 92 mm 'C' stud with two layers of 12.5 mm plasterboard
Drywall partition with 92 mm 'C' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 92 mm 'C' stud with two layers of 15 mm plasterboard
Drywall partition with 92 mm 'C' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 92 mm 'I' stud with 12.5 mm plasterboard
Drywall partition with 92 mm 'I' stud and one layer of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 92 mm 'I' stud with 15 mm plasterboard
Drywall partition with 92 mm 'I' stud and one layer of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 92 mm 'I' stud with two layers of 12.5 mm plasterboard
Drywall partition with 92 mm 'I' stud and two layers of 12.5 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Standard partition 92 mm 'I' stud with two layers of 15 mm plasterboard
Drywall partition with 92 mm 'I' stud and two layers of 15 mm thick plasterboard to each side.
K10 Plasterboard dry linings/ partitions/ ceilings
 
Document Thumbnail
Stop Bead
Galvanised steel edge trim for drywall systems.
M20 Plastered/rendered/roughcast coatings
 
Ultimate Backing Plaster
Undercoat plaster.
M20 Plastered/rendered/roughcast coatings
 
Document Thumbnail
Universal Board Finish
High performance finish plaster for application to ivory face of plasterboard.
M20 Plastered/rendered/roughcast coatings
 
Document Thumbnail
Wall liner system
A lightweight, metal framed, lining system.
K10 Plasterboard dry linings/ partitions/ ceilings