Home > Companies > IKO PLC > IKOpro Faststick Adhesive for Insulation

A two-part, low-foaming, solvent-free polyurethane adhesive developed for rapid and high-strength bonding of roofing membranes to a wide range of roofing substrates. Supplied in twin-pack plastic cartridges for mixing and application using a recommended power hand applicator tool, allowing the adhesive to be applied precisely and evenly with minimum effort and without waste. Can be applied at temperatures down to 0°C. Adhesive is fully cured in 20-30 minutes. Coloured green when mixed for easy identification. Independently tested and approved by the BRE.

Features:

  • Coverage: Approximately 15 m² per cartridge, depending on surface porosity. Coverage rate should be doubled to all perimeter and exposed edges.
  • 4 x 15 mm beads per m² to main roof.
  • 8 x 15 mm beads per m² to perimeter edges.
  • Application temperature: 0–30°C.
  • Open time: 1–6 minutes at 5°C; 1–3 minutes at 20°C; 1-2 minutes at 30°C.
  • Curing time: 23 minutes at 5°C; 10 minutes at 20°C.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-50-00/355 Polyurethane adhesives

Product specification

An important note about specifying

Manufacturer

Name:

IKO PLC

Tel:

+44 (0)1257 255 771

Product reference

IKOpro Faststick Adhesive for Insulation

Manufacturer details

Appley Lane North,
Appley Bridge,
Wigan,
Lancashire, WN6 9AB
Tel +44 (0)1257 255 771
Fax +44 (0)1257 252 514
NBS Plus
RIBA CPD