Duofix frame for Wall-hung WC with Kappa cistern 150 mm

Application:

• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres.

• For installation in a partial-height Duofix system wall in front of a solid or drywall construction.

• For mounting in front of a solid or drywall construction.

• For a screed of 0–20 mm.

• Any boarding must be fixed tight up against the face of the Duofix frame and screwed directly to the frame.

• If frame is being installed with bespoke furniture with furniture clips, Gerberit would advise that article 111.837.00.1 is specified.

Characteristics:

• Self-supporting.

• Frame with C-profile 40/40 mm.

• Powder-coated frame, ultramarine blue.

• Galvanized leg supports, steplessly adjustable 0–200 mm.

• Feet can be retracted 50 mm.

• Rotating foot plate, for installation in UW50 profiles.

• Frame with holes 9 mm diameter for fastening in wood frame construction.

• Fast adjustment of the actuator rods for flush plate.

• Protection housing for service opening, can be cut to length.

• Frame height: 820 mm.

• With wall brackets to allow up to a 200 mm duct. For larger ducts up to 400 mm use extension bolts 111.887.00.1.

• Geberit Kappa concealed cistern 150 mm with front or top actuation.

• Dual flush with Kappa flush plates.

• Dual flush with pneumatic and mechanical buttons.

• Single flush with pneumatic buttons.

• Water supply connection left.

• Fastening for outlet bend sound-absorbing.

• Connection hose to angle stop valve can be screw-connected by hand.

• For pans with contact surfaces smaller than 170 mm (see accessory 111.847.00.1).

• To reduce flush volume to either 4.5/3 L dual flush or 4/2.6 L dual flush requires material number 242.310.00.1 (must be used with pans designed for low volume flush).

• The cistern can be operated with used water (rainwater) provided it is passed through a filter system first.