A two-pack, high build, hard wearing polyurethane floor coating forming a tough and durable finish with resistance to light-medium chemical attack, and for use in wet environments. Resistant to hot water and can be steam cleaned. By incorporation of suitable aggregates, anti-slip finishes with a range of thicknesses and textures can be created.

Designed for application in heavy duty industrial areas such as food units, bakeries, basement car parks, plant rooms and generally where a flexible high build, anti-slip surface is required. Also designed as a hard wearing, anti-slip finish for vehicle decks.

Excellent adhesion to both asphalt and bituminous surfaces.

Resudeck:

  • Standard grade of solvent-free, high build polyurethane coating designed to be applied at an approximate thickness of 200–500 microns per coat.

Resudeck E35:

  • Resudeck E35 is a more flexible grade for decking and areas where flexibility is required.

Advantages:

  • A solvent-free coating which cures to a gloss finish.
  • Low odour.
  • Dries overnight at ambient temperature to receive foot traffic after 24 hrs.
  • Can be applied onto concrete, wood and asphalt etc. Metal surfaces may also be treated, in conjunction with a compatible, solvent-based metal primer - RX66.
  • Anti-slip finishes can be created by applying a scatter of aggregate.
  • Excellent resistance to most fuels and lubricants.
  • Available in a range of attractive colours.

Product properties at 20°C:

  • Coverage: Both graded 2–5 m² per litre.
  • Film thickness: Resudeck will produce a thickness of 200 microns when applied at 5 m² per litre and 500 microns when applied at 2 m² per litre.
  • Pot Life: 30 minutes.
  • Tack free time: 8 hours.
  • Hard film time: 3 days.

Standard product features

Primer: RSL would recommend priming with either Resuseal WB or Resuprime. Other projects may require more specialised primers. Please contact RSL for guidance.

Options

Surface seal:

  • Good general resistance to both acids and alkalis. Resudeck standard can be overcoated with Resutile to further improve chemical resistance.
  • Best performance is achieved with the application of 2 coats.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-35-84/432 Surface sealers for floors

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Sherwin-Williams Protective and Marine Coatings

Tel:

+44 (0)1204 521771

Product reference

[Resudeck]
[Resudeck E35]

Colour

[Salsa]
-
Standard; other colours available.
[Forest Green]
[Kingfisher Blue]
[Flint]
[Stirling]

Primer

[Resuprime]
[Resuseal]
[R.S Dampshield]

Anti-slip finish

[Required - Scattered Bauxtile aggregate]
[Required - Scattered - Aluminium Oxide aggregate]
[Not required]

Surface seal

Not required

Manufacturer details

Tower Works,
Kestor Street,
Bolton,
Lancashire, BL2 2AL
Tel +44 (0)1204 521771
Fax
NBS Plus