Home > Companies > AluK (GB) Ltd > AluK F82 Thermally Broken Sliding Folding Door System

Thermally broken aluminium folding sliding door.

Features and benefits:

  • Heavy duty stainless steel compact roller design.
  • Fully symmetrical frame sightline.
  • Unique, flush pop-out handle.
  • Low threshold option.
  • Doors are Secured by Design accredited and are certified in accordance with BS 4873 and PAS 24.
  • Aluminium profiles are extruded in accordance with BS EN 12020, and are manufactured from grade 6060/6063 T6 aluminium.
  • Compliant with ADL1/ ADL2 capable of achieving U-values of 1.1 W/m²K.

Related literature

The following content references this product:

Standard product features

Frame depth:

82 mm.

Bead:

Square.

Recommended weight limits (maximum):

Individual panel weight not to exceed 150 kg.

Performance:

  • Air permeability rating: Class 4 (600 Pa).
  • Water tightness rating: Open in: Class 5A (200 Pa); open out: E900 (900 Pa).
  • Wind resistance: Class B3 (1200 Pa).

Options

Recommended size limits (maximum):

  • With traffic door - maximum panel size (w x h): 1200 x 2600 mm.
  • Without traffic door - maximum panel size (w x h): 1200 x 3000 mm.

Outer frame:

Compatible with a range of ancillary profiles including frame extenders, corner posts, couplers and sills.

Configuration:

Panels can be stacked inside or outside of the room, to the left, right or split to stack on both sides. Door sets can be manufactured to replace entire walls to maximize the opening space. Consult AluK (GB) Ltd for details.

Available configurations:

  • 2-0-2 - Two panels/ zero sliding LH/ two sliding RH - without traffic door.
  • 2-2-0 - Two panels/ two sliding LH/ zero sliding RH - without traffic door.
  • 3-0-3 - Three panels/ zero sliding LH/ three sliding RH - with traffic door.
  • 3-1-2 - Three panels/ one sliding LH/ two sliding RH - with traffic door.
  • 3-2-1 - Three panels/ two sliding LH/ one sliding RH - with traffic door.
  • 3-3-0 - Three panels/ three sliding LH/ zero sliding RH - with traffic door.
  • 4-0-4 - Four panels/ zero sliding LH/ four sliding RH - without traffic door.
  • 4-1-3 - Four panels/ one sliding LH/ three sliding RH - with traffic door.
  • 4-2-2 - Four panels/ two sliding LH/ two sliding RH - without traffic door.
  • 4-3-1 - Four panels/ three sliding LH/ one sliding RH - with traffic door.
  • 4-4-0 - Four panels/ four sliding LH/ zero sliding RH - without traffic door.
  • 5-0-5 - Five panels/ zero sliding LH/ five sliding RH - with traffic door.
  • 5-1-4 - Five panels/ one sliding LH/ four sliding RH - with traffic door.
  • 5-2-3 - Five panels/ two sliding LH/ three sliding RH - with traffic door.
  • 5-3-2 - Five panels/ three sliding LH/ two sliding RH - with traffic door.
  • 5-4-1 - Five panels/ four sliding LH/ one sliding RH - with traffic door.
  • 5-5-0 - Five panels/ five sliding LH/ zero sliding RH - with traffic door.
  • 6-0-6 - Six panels/ zero sliding LH/ six sliding RH - without traffic door.
  • 6-1-5 - Six panels/ one sliding LH/ five sliding RH - with traffic door.
  • 6-2-4 - Six panels/ two sliding LH/ four sliding RH - with traffic door.
  • 6-3-3 - Six panels/ three sliding LH/ three sliding RH - with traffic door.
  • 6-4-2 - Six panels/ four sliding LH/ two sliding RH - without traffic door.
  • 6-5-1 - Six panels/ five sliding LH/ one sliding RH - with traffic door.
  • 6-6-0 - Six panels/ six sliding LH/ zero sliding RH - without traffic door.

Glazing:

- Glass panels:

28–44 mm glass look-a-like panels incorporating two panes of minimum 6 mm- thick glass, with a 16 mm argon gas filled cavity and ceramic painted internal face with foil backed insulation to achieve a maximum 0.35 W/m²K centre pane. Exposed internal faces of insulation incorporate an internal polyester powder coated aluminium tray backing.

- Glazing:

28–44 mm insulating glass units incorporating a clear low emissivity inner pane and a clear outer pane with an argon gas filled cavity and 'warm edge' spacer bar to achieve a maximum centre pane U-value of 1.0 W/m²K. All glass within 800 mm from FFL should be toughened or laminated (within 1500 mm from FFL if within 300 mm of a door).

- Infill panels:

28–44 mm insulated sandwich panels incorporating two sheets of a minimum 2 mm- thick polyester powder coated aluminium sheet to match framing and minimum 24 mm non-combustible foam insulation core.

Finish:

  • A variety of powder coated colours are available in accordance with BS 6496 and BS EN 12206-1:2004. Powder coating is applied to a Qualicoat standard, utilizing an inline flash anodizing pre-treatment process, with the polyester powder coating applied within 30 minutes of the flash anodizing process to ensure suitable adhesion.
  • Doors can be dual coloured, textured or have an anodized finish.

Ironmongery:

High security hinges and locking mechanisms as standard with shootbolts top and bottom of the interlocks for enhanced security. Full range of suited hardware available.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-28/366 Sliding door and partition sets

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

AluK (GB) Ltd

Tel:

+44 (0)1291 639739

Product reference

AluK F82 Thermally Broken Sliding Folding Door System

Size

[As drawing]
-
Insert reference.
[As schedule]
-
Insert reference.

Outer frame

[U61200]
-
Rebated frame.
[U61060]
-
Flush frame.

Vent

[U61300]
-
Sash.
[U61500]
-
Floating mullion.

Coupler

[Not required]
[P-00-512]
-
Coupling bar.

Sub sill

[Not required]
[U61630]
-
190 mm sill.

Configuration

[ ______ ]

Glazing

[Glass panels]
-
28–44 mm glass look-a-like panels, insert requirements.
[Glazing]
-
28–44 mm insulating glass units, insert requirements.
[Infill panels]
-
28–44 mm insulated sandwich panels, insert requirements.

Finish

 - Exterior:
 

   Type:

[Anodized to a minimum 15 micrometres thickness]
[Polyester powder coated to a minimum 60 micrometres thickness]
[Polyester powder coated to a minimum 60 micrometres thickness with marine environment guarantee]
 

   Texture:

[Not applicable]
-
For anodized.
[High gloss]
[Matt]
[Semi-gloss]
[Textured]
[Textured metallic]
 

   Colour:

 
 - Interior:
 

   Type:

[Anodized to a minimum 15 micrometres thickness]
[Polyester powder coated to a minimum 60 micrometres thickness]
[Polyester powder coated to a minimum 60 micrometres thickness with marine environment guarantee]
[As exterior]
 

   Texture:

[Not applicable]
-
For anodized.
[High gloss]
[Matt]
[Semi-gloss]
[Textured]
[Textured metallic]
[As exterior]
 

   Colour:

 

Ironmongery

[ ______ ]

Accessories

[None]
[U61631]
-
20 mm add on.
[U61632]
-
40 mm add on.

Manufacturer details

Newhouse Farm Industrial Estate,
Mathern,
Chepstow, NP16 6UD
Tel +44 (0)1291 639739
Fax
NBS Plus
RIBA CPD