Rapid-hardening two-part (powder and liquid) self-smoothing compound. It is for use on absorbent and non-absorbent substrates to prepare floor surfaces for installing ceramics, natural stone, sheet and soft furnishings in dry or wet interior and exterior environments. Exceeds the requirements for BS EN 13813 CT-C35_F10.

Primer:

Screed substrates should be primed with either diluted BAL Prime APD or Primer.

Features:

  • At 3 mm thickness can receive a rigid tiled finish after 4 hours.
  • Can be used in heavily trafficked areas.
  • Can be used for internal wet duty and exterior areas.
  • Can be walked on after 3–4 hours.
  • For use with most substrates, including over existing glazed floor tiles.
  • High strength.
  • Suitable for use with underfloor/ undertile floor heating.

Standard product features

Composition:

Two-part, acrylic-based, protein-free, self-smoothing compound.

Colour:

Grey.

Bed thickness:

  • Feather-edge: Up to 10 mm.
  • With added 3 mm granite chippings: 10–20 mm.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-55-10/320 Smoothing or levelling underlayment compound

Product specification

An important note about specifying

Manufacturer

Name:

Building Adhesives Ltd

Tel:

+44 (0)1782 591100

Product reference

Acrybase

Manufacturer details

Longton Road,
Trentham,
Stoke-on-Trent,
Staffordshire, ST4 8JB
Tel +44 (0)1782 591100
Fax +44 (0)1782 591101
NBS Plus
NBS National BIM Library
RIBA CPD