Home > Companies > Saint-Gobain Isover > Isover CLIMPIPE Section Alu2

Foil faced pipe insulation is designed to provide thermal and acoustic insulation of copper and steel pipework. These are strong, lightweight pre-formed ‘snap on’ sections, manufactured from up to 80% recycled content.

Isover CLIMPIPE Section Alu2 Sections provide a factory applied reinforced aluminium foil covering, incorporating a self adhesive overlap, providing an effective vapour control finish.

Features:

  • High levels of thermal and acoustic performance.
  • Consistent density and concentricity of bore positioning provides consistent performance along the length of the section.
  • Euroclass A2 fire rating when classified with BS EN 13501-1.
  • Manufactured from up to 80% recycled content.
  • Will not absorb moisture and is chemically neutral / slightly alkaline. Will not accelerate corrosion with steel, coppers or aluminium.

Standard product features

Size:

Supplied in 1200 mm lengths in a range of standard bore inner diameters and wall thicknesses.

Fire performance:

The base mineral wool of Isover duct products has a Euroclass A2 fire rating when classified in accordance with BS EN 13501-1. Additionally, the factory applied aluminium foil facing meets the highest standards required by BS 476-6: Fire Propagation and BS 476-7: Surface Spread of Flame. The foil is therefore rated Class O to the Building Regulations.

Smoke and Toxicity - Achieves the criteria for smoke and toxicity as given in the IMO Resolutions MSC 61 (67).

Service temperature:

The insulation can be used on pipework with continuous service temperatures of 230°C and over. Where temperatures exceed 230°C, consult with Saint-Gobain Isover Technical Department for design advice.

Declared Thermal conductivity:

  • 0.033 W/m·K at 10°C mean temperature.
  • 0.036 W/m·K at 50°C mean temperature.
  • 0.043 W/m·K at 100°C mean temperature.
  • 0.063 W/m·K at 200°C mean temperature.

Chemical Resistance:

Immediately following manufacture, the leachable ion content of Isover glass mineral wool pipe insulation falls within the 'Acceptable Analysis' area of the 'Acceptability of Insulation' graph given in ASTM C795, tested in accordance with ASTM C871-04. Will not accelerate corrosion with all copper, steel and aluminium plant and equipment

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
90-90-40/330 Mineral wool pipe section insulation

Product specification

An important note about specifying

Manufacturer

Name:

Saint-Gobain Isover

Tel:

+44 (0)192 8704135

Product reference

Isover CLIMPIPE Section Alu2

Standard bore inner diameter

[ ______ ]

Wall thickness

[ ______ ]

Manufacturer details

White House Industrial Estate,
Runcorn,
Cheshire, WA7 3DP
Tel +44 (0)192 8704135
Fax
NBS Plus
RIBA CPD
Other content by this manufacturer:
Company Overview Products (30) CPD (1)