Home > Companies > BURGESS BY SYSTEM > Clip-in External Grid

The Burgess Clip-In system can be used in external conditions where the ceiling is not directly exposed to rainfall. The system utilises non-perforated bevel or square edge tiles to a variety of sizes (including trapezoidal), within a standard concealed Tee Bar grid. Enhanced coatings or finishes can be offered to meet the most demanding of environments.

Installation techniques are similar to standard Clip-In ceilings, although fixing centres are reduced to resist wind loadings. Panels are retained in the Tee Bar in the normal manner and an additional security clip must be utilised to prevent the tile from becoming detached. Access to the void is normally obtained through hinged lockable access panels and from here all panels can be removed.

For use with:

  • Clip-in external tile.
  • Clip-in security tile.

Applications:

  • Airport.
  • Hotel.
  • Prison/ Security.
  • Railway Station.
  • Shopping Mall.

Standard product features

Components:

  • GT109 – Universal tee bar/ channel bracket. 1.2 mm galvanized carbon steel 68 mm wide x 46 mm high x 37 mm deep to suit 38 x 19 mm channel.
  • GT112 – (Primary channels at 1200 mm maximum centres). 3000 mm long suspension channel. 38 x 19 x 1.6 mm galvanized carbon steel.
  • GT114 – (At 1200 mm maximum centres). 3000 mm long suspension angle. 19 x 19 x 0.8mm galvanized carbon steel.
  • GT115 – (Clip-in security only). 3000mm long full tee bar.
  • GT119 – 2400 mm long channel trim. 38 mm x 19 mm x 0.5 mm galvanized carbon steel painted to suit requirements.
  • GT120 – Channel trim wedge, 255 mm long. 41 x 15 x 0.5mm zinc coated carbon steel.
  • GT1071 – External soffit/ security clip. 2.5 mm spring steel wire galvanized.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-70-45/335 Demountable suspended ceiling grid

Product specification

An important note about specifying

Manufacturer

Name:

BURGESS BY SYSTEM

Tel:

+44 (0)1455 618787

Product reference

Clip-in External Grid

Accessories

[Not required]
[GT102]
-
Type T1 bottom fixing clip with pre-punched 7 mm diameter clearance hole for use with 19 x 19 mm suspension angle. Size 57 x 28.5 x 1.6 mm galvanized carbon steel.
[GT107]
-
Type G1 channel/ tee bar clip. 2.5 mm spring steel wire, galvanized. For use with 38 x 19x 1.6 mm channel.
[GT108]
-
Type G2 channel/ tee bar clip for use with 38 x 19 x 1.6 mm channel. 2 mm galvanized carbon steel, supplied with two M5 x 65 mm long round head cadmium plated setscrews, nuts and washers.
[GT113]
-
Suspension channel coupler. 152 mm long pre-drilled with two 7 mm diameter clearance holes. 35 x 16 x 1.2mm galvanized carbon steel.
[GT116]
-
Full tee bar coupler, 128 mm long 46 mm wide x 0.6 mm galvanized carbon steel.
[GT118]
-
3000 mm long half tee bar 23 mm wide x 34.5 mm deep x 0.7 mm galvanized carbon steel.
[GT121]
-
2400 mm long odd leg channel trim. 32 x 44 x 19 x 0.5 mm zinc coated carbon steel. Painted to suit requirements.
[GT122]
-
Odd leg channel trim wedge, 275 mm long. 47 x 14 x 0.5 mm zinc coated carbon steel.
[GT123]
-
2400 mm corner section. 64 x 19 mm aluminium. Painted to suit requirements.
[GT130]
-
Extractor tool type 1.
[GT133]
-
2400 mm long closure angle. 100 x 25 x 0.9 mm zinc coated carbon steel. Painted white on one exposed face. Other sizes available.
[GT134]
-
2400 mm long closure strip. 100 mm wide x 0.7 mm zinc coated carbon steel.
[GT135]
-
Limpet vacuum lifter.
[GT137]
-
Extractor tool type 3. Spring steel blade with wooden handle.
[GT140]
-
Dust cover 500 mm long x 18 mm 0.08 deep 0.5 mm galvanized carbon steel.
[GT5122]
-
Single sided external soffit/ security clip. 2.5 mm spring steel wire galvanized.
[GT5073]
-
90° tee bar connector 140 x 140 x 0.7 mm galvanized carbon steel, supplied flat for bending and fixing on site.

Manufacturer details

Brookfield Road,
Hinckley,
Leicestershire, LE10 2LL
Tel +44 (0)1455 618787
Fax +44 (0)1455 251061
NBS Plus
Other content by this manufacturer:
Company Overview Downloads (3) Products (32)