Home > Companies > HAG Ltd. - The Door Specialists > Roller Shutter Clear Guard

A heavy-duty roller shutter manufactured from hard coated polycarbonate with interconnecting anodized hinges. designed for commercial applications in areas requiring medium security and where maximum vision is required.

Related literature

The following content references this product:

Standard product features

Operation:

Single phase electrical operation

Control:

Security Key Switch / Rocker Switch.

Alternative controls are available on request.

Ironmongery:

Consult with HAG Shutters & Grilles for recommendations and details.

Options

Box sizes:

3200mm overall height – box size 300mm.

3650mm overall height – box size 350mm.

Guide rails:

Standard guide rails 110mm x 38mm x 3mm aluminium with brush seals .

Electrical operation:

A tubular motor housed within the barrel assembly with limit switches and thermal cut out to prevent overheating.

Draw 240 volts and 0.5-3.5 amps dependent on shutter size.

Override:

The provision of a separate 13 amp fused spur is required for installation.

Manual overrides and supplied for shutters, which are to be installed over entrance/ exit doorways to permit operation in the event of a power failure, usually from one side only.

Control:

A standard security key switch or rocker switch, alternative controls are available on request.

Consult HAG Shutters & Grilles Ltd technical literature for details. HAG Shutters and Grilles Ltd can also provide a design and specification service and it is recommended that they be consulted early in the design process.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-28/414 Roller shutter sets

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

HAG Ltd. - The Door Specialists

Tel:

+44 (0)800 072 3444

Product reference

Hag Clear Guard Roller Shutter

Performance

Consult with HAG Shutters & Grilles for recommendations and details.

Arrangement

Vertical operation.

Shutter curtain

Hard coated polycarbonate

Finish as delivered:

Clear polycarbonate - Standard factory finish.

Frame/ Guides

110mm x 38mm x 3mm aluminium with brush seals - For standard frame.

Finish as delivered

[Natural Anodized]
-
Standard factory finish.
[Polyester powder coated]
-
Optional factory finishes.

Manufacturer details

1 Oak Lane,
Fishponds,
Bristol, BS5 7UY
Tel +44 (0)800 072 3444
Fax +44 (0)117 965 7773
NBS Plus
NBS National BIM Library