Home > Companies > SIG Building Solutions > AS20/1000 Liner

Shallow profile steel liner sheet for roofs and walls.

  • Suitable for fixing to steel or timber purlins.
  • Choice of steel gauge.
  • Profile features 20 mm deep ribs.
  • Suitable for site cutting using reciprocating or circular saw.
  • Co-ordinating elements available: secondary steelwork, cladding sheets, insulation, site assembly profiled rooflights, trims, guttering, doors, louvre panels, profile fillers, sealants.

Fixings:

  • General: Possible through valleys or crowns. Valley fixing recommended. Stainless steel or carbon steel self-drilling screws, 16 mm bonded washers, 4 mm diameter NFRC class A Butyl sealant at end laps and 50 x 1 mm Polyband air seal/ moisture barrier tape at side laps.
  • To steel: Should pass through the section, leaving minimum 5 mm exposed thread.
  • To wood: Must achieve 40 mm (minimum) embedment.

Durability:

  • Advisory Committee for Roofwork ACR(M)001-2005: class B, non-fragile assembly (0.7 mm gauge only) when installed to manufacturer recommendations.

Fire:

  • Spread of flame: Class 1 to BS 476-7. Euroclass B. Class O as described in Approved Document B. FAA/ SAA to BS 476-3.

Standard product features

Cover width:

1 m.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-65-52/345 Low carbon steel linings

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

SIG Building Solutions

Tel:

+44 (0)161 2310001

Product reference

AS20/1000 Liner

Gauge

[0.4 mm]
[0.7 mm]
-
Weight 5.75 kg/ m².

Finish

 - Type:

18µ polyester painted

 
 - Colour:

White

 

Manufacturer details

3 Stokes Street,
Manchester,
Great Manchester, M11 4QU
Tel +44 (0)161 2310001
Fax +44 (0)161 2311055
NBS Plus
NBS National BIM Library