A burglary-resistant louvre door that has been extensively tested by SKG in accordance with the European standards (EN 1627 & NEN 5096+C2) and has been certified as burglary resistance class 2.

The DucoDoor Louvre can also be made draught-free. The special hinges fitted to the side made it possible to create a large usable width and enabled the door to be opened 180°.

This type of louvre door can easily be integrated into a louvre wall as it can be made using any of the full range of Solid, Classic and Basic blades.. Ten-year warranty.

Applications:

For use in louvre wall systems with specific requirements for burglary resistance and/ or draught proofing.

Standard product features

Material:

  • Louvre blades and support profiles: Aluminium, Al Mg Si 0.5.
  • Louvre holders: Polyamide, PA 6.6, reinforced with glass fibre.
  • Rubber gasket: Thermoplastic elastomers (TPE).

Opening angle:

180°.

Hinges:

  • Stainless steel hinges, equipped with security pins in RC2 (resistance class) configuration.
  • Two hinges per door leaf as standard; three hinges per door leaf when door leaf height >2300 mm or door leaf width >1250 mm.
  • Allow opening angle up to 180°.

Ventilation performance:

Dependent on louvre, consult manufacturer's literature for information.

Water resistance:

Dependent on louvre, consult manufacturer's literature for information.

Options

Size:

Size:- Door frame height:

  • Single door (intrusion resistant): Minimum: 2050 mm; maximum: 2900 mm.
  • Single door (non-intrusion resistant): Minimum: 1500 mm; maximum: 2900 mm.
  • Double Door (intrusion resistant): Minimum: 2050 mm; maximum: 2900 mm maximum
  • Double door (non-intrusion resistant): Minimum: 1500 mm; maximum: 2900 mm.

– Door frame width:

  • Single door: Minimum: 760 mm (depending on surface-mounted louvre); maximum: 1600 mm.
  • Double door: Minimum: 1420 mm (depending on surface-mounted louvre); maximum: 3100 mm.

Finish/ Colour:

  • Anodized: Qualanod-compliant, coating thickness 15–20 µm, standard natural colour (clear anodizing).
  • Powder coated: Qualicoat-compliant, minimum average coating thickness 60–80 µm, standard RAL colours with 70% gloss.

Framing system:

Door frame section with mitre angle joints and fitted with rubber gasket

- Partial door frame:

Bottom door frame section is replaced by a 60 x 5 mm flat section (can be removed after fitting).

Louvre support profiles:

Dependent on louvre, consult manufacturer's literature for information.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-28/344 Metal doorsets

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Duco Ventilation & Sun Control NV

Tel:

+44 (0) 333 772 7734

Product reference

[DucoDoor Louvre Double]
[DucoDoor Louvre Single]

Size

[ ______ ]

Configuration

[Inward opening]
[Outward opening]

Handing

[Left hand]
[Right hand]

Louvre blades

[ ______ ]

Support sections

[ ______ ]

Finish/ Colour

[Anodized]
[Powder coated, RAL]
-
Insert colour requirements.

Framing system

[Full]
[Partial]
-
Insert drawing reference.

Locking

 - Type:
[Anti-panic device with Euro profile cylinder, 40 mm, type 30/10]
-
On request. For outward opening doors.
[Euro profile cylinder 60 mm, type 30/30]
-
Standard, includes three keys.
 
 - Height:
[1064 mm]
-
Standard.
[Special order]
-
Insert requirement.
 

Handles

[Lever handle inside, T-handle outside]
-
Standard.
[Special order]
-
Insert requirement.

Accessories

[None]
[Door closer - pump]
[Door limiter - storm chain]
[Escutcheon on lock side]
[Escutcheon plate opposite escutcheon]
[Fixed aluminium cover front plate]
[Mupan insulation, 50 mm thick]
-
Includes full aluminium back plate.
[Stainless steel mesh, 2.3 x 2.3 mm]
-
Resistant to insects, vermin and birds.
[Stainless steel mesh, 6 x 6 mm]
-
Resistant to vermin and birds.
[Stainless steel mesh, 20 x 20 mm]
-
Resistant to birds.

Manufacturer details

Handelsstraat 19,
8630 Veurne,
Belgium
Tel +44 (0) 333 772 7734
Fax +32 58 330044
NBS Plus
RIBA CPD