Solar shading consisting of modular components with fixed louvre blades. Due to the patented Duco 'Slide-Click' system, the louvre blades are secured quickly and easily in a fixed angle to the support structure.

Features and benefits:

  • Simple component system.
  • Louvre blades with discrete C-shaped design.
  • Quick assembly due to the patented 'Slide-Click' system.
  • Specific assembly application for any situation.
  • Ten-year warranty.

Applications:

Solar shading.

Related literature

The following content references this product:

Standard product features

Material:

  • Louvre blades and support profiles: Aluminium EN AW – 6063 T66.
  • Louvre holders: Polyamide, PA 6.6, reinforced with glass fibre.
  • Wall plates (horizontal models): Steel, QSTE 380.

Blade width:

100 mm.

Options

Finish/ Colour:

  • Anodized: Qualanod-compliant, coating thickness 15–20 µm, standard natural colour (clear anodizing).
  • Powder coated: Qualicoat-compliant, minimum average coating thickness 60–80 µm, standard RAL colours with 70% gloss.

Maximum span:

Dependent on model, louvre blades and wind load.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-50/420 Brise-soleil fixed blade panels

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Duco Ventilation & Sun Control NV

Tel:

+44 (0) 333 772 7734

Product reference

[DucoSun 100C Framed]
-
Horizontal with blades within a frame, louvre spacing: 107.5 mm, inclination: 45°.
[DucoSun 100C Intermediate]
-
Horizontal with blades between support profiles, louvre spacing: 107.5 mm, inclination: 45°.
[DucoSun 100C Overslung]
-
Horizontal with blades above the support profiles, louvre spacing: 107.5 mm, inclination: 45°.
[DucoSun 100C Underslung]
-
Horizontal with blades below the support profiles, louvre spacing: 100 mm, inclination: 60°.
[DucoSun 100C Vertically]
-
Vertical, louvre spacing: 127.5 mm, inclination: 45°.

Finish/ Colour

 - Louvre blades and support profiles:
[Anodized]
[Powder coated, RAL]
-
Insert colour requirements.
 
 - Louvre holders:
[Black]
[Grey]
 

Support profiles

 - Type:
[21/50 Multi]
-
For Vertically only, 21 mm width.
[30/12]
-
For Intermediate and Vertically only.
[30/50 Type B]
-
Not available with Framed or Intermediate, 30 mm width.
[30/78]
-
Not available with Framed or Intermediate, 30 mm width.
[50/12]
-
For Intermediate and Vertically only, 50 mm width.
[50/50]
-
For Vertically only, 50 mm width.
[86/95]
-
For Intermediate only, 86 mm width.
 
 - End treatment:
[Decorative profile - 90 round]
-
For Overslung and Underslung only, insert finish/ colour requirements.
[Decorative profile - 100 semi-circular]
-
For Intermediate only, insert finish/ colour requirements.
[Decorative profile - 150 flat]
-
For Overslung and Underslung only, insert finish/ colour requirements.
[Decorative profile - 175 flat]
-
For Overslung and Underslung only, insert finish/ colour requirements.
[Frame profile - 100 flat]
-
For Framed only.
[Frame profile - 100 round]
-
For Framed only.
[Plastic stopper, black]
-
Not available with Framed or Intermediate.
[Plastic stopper, grey]
-
Not available with Framed or Intermediate.
[Pull rod]
-
For Overslung and Underslung only.
 

Manufacturer details

Handelsstraat 19,
8630 Veurne,
Belgium
Tel +44 (0) 333 772 7734
Fax +32 58 330044
NBS Plus
RIBA CPD