Offering substantial water savings and a short payback period, installing urinal controls is often the first step in a water management programme. Urinal controls also ensure that washrooms remain clean and fresh, by programming the controls to meet the individual needs of each building. Variable settings allow adjustable time delays between flushing, providing maximum efficiency and savings. Operation is simple; a passive infrared (PIR) detector detects movement within the ‘sensing area’, switching the unit into a timing mode. After a pre-set time, the separately installed solenoid valve opens. Water flows into the cistern and therefore activates the flushing cycle. The fill-time for the cistern can be customised by the user, using the appropriate switches on the Flushmatic board. The system’s fast fill design helps eliminate scale problems associated with slow or drip fed systems. An automatic flush every 12 hours is also programmed into the unit, should the system not be used during that time. Variable settings allow adjustable time delays between flushing providing maximum efficiency and savings.
Features:
- Up to 80% savings on water costs.
- Includes power PSU or batteries.
- Adjustable fill time (15 minutes maximum).
- Janitorial flush (after 12 hours of non-use).
Product reference:
- Flushmatic - Downlighter:
The Flushmatic downlighter is a suspended ceiling urinal control for multiple station urinals.
- Ceiling or wall mountable.
- Available in mains or battery.
- Battery low detection and indication (optional).
- Flushmatic - Surface Mount:
The standard Flushmatic is a wall or ceiling ‘surface mounted’ urinal control for multiple station urinals.
- Ceiling or wall mountable.
- Available in mains or battery.
- Battery low detection and indication (optional).
- Individual Control System:
The individual operation urinal control system can be supplied for single or double station urinals. Standard sensor comes with 50 mm bezel.
- Single or double station urinal flushing.
- Only flushes when user walks away from urinal.
- Pearl:
The Pearl is a suspended ceiling urinal control for multiple station urinals. This unit is the size of a mini-downlighter and incorporates low battery indication.
- Occupancy detection and indication (indicated by a flashing green light).
- Battery low detection and indication (indicated by a flashing red and green light).
- Valve closed before battery failure (indicated by a flashing red light until total battery loss).
- Available in mains or battery.
Type:
- Flushmatic surface mount kits:
- UC01-001 – Flushmatic surface mount kit in grey - battery.
- UC01-004 – Flushmatic surface mount kit in stainless steel - battery.
- UC01-005 – Flushmatic surface mount kit in white - battery.
- UC01-007 – Flushmatic surface mount kit with battery low indicator in grey - battery.
- UC01-008 – Flushmatic surface mount kit with battery low indicator in stainless steel - battery.
- UC01-009 – Flushmatic surface mount kit with battery low indicator in white - battery.
- UC01-014 – Flushmatic surface mount kit in grey - mains.
- UC01-016 – Flushmatic surface mount kit in stainless steel - mains.
- UC01-017 – Flushmatic surface mount kit in white - mains.
- Flushmatic downlighter kits:
- UC01-018 – Flushmatic downlighter kit for suspended ceilings in white - battery.
- UC01-024 – Flushmatic downlighter kit for suspended ceilings in white - mains.
- UC01-028 – Flushmatic downlighter kit with battery indicator in white - battery.
- Pearl downlighter kits:
UC01-019 – Pearl downlighter kit for suspended ceilings in white - battery.
UC01-022 – Pearl retro-fit downlighter kit for suspended ceilings in white - battery.
UC01-025 – Pearl downlighter kit for suspended ceilings in white - mains.
UC01-026 – Pearl retro-fit downlighter kit for suspended ceilings in white - mains.
UC01-027 – Pearl Solo downlighter kit for suspended ceilings in white - mains.