Home > Companies > Gunnebo UK Ltd > GlasStile R

Entrance Gates are designed to combine smooth function and sophisticated appearance with security needs in settings where design is important.

The Entrance Gates are completely silent and provide easy passage and high through-put. Designed to reduce the barrier effect and create a welcome atmosphere, visitors can immediately see how and where they should enter. A wide range of designs, materials and functions are available. A grained or polished stainless steel motorised column with three glass leaves, curved glass, steel curved handrails and material options for the handrails complete the offering.

Passage in both directions is electronically controllable. On receiving a signal from the access control system or push button, the unit will unlock and be in a state of readiness for use. When the leaf receives pressure from the user i.e. pushes to start, the motor will take over and drive 120° to its next home position. Should the leaf meet any resistance it will stop and nudge forward, if the obstruction continues the unit will alarm and free wheel, the auto reset will then re-establish control. Should an attempt be made to tailgate a legitimate user, the unit will lock and again the auto reset will re-establish control.

Options

Product reference:

  • Type A: 304 grade grained stainless steel. 63 mm diameter uprights and 38 mm diameter handrail.
  • Type B: 304 grade polished stainless steel. 50 mm diameter uprights and handrail.
  • Type C: 304 grade grained stainless steel. 63 mm diameter uprights with handrail design and material choice and 10 mm curved toughened glass.

Orientation:

Pass left and pass right refers to which side the card reader is situated relative to somebody entering through the Entrance Gate i.e. if the card reader is on your right hand side it would be 'pass left' and vice versa.

Rotor cladding and casework:

Choice of stainless steel grained or polished.

Handrail:

The choice of handrail material and design is only available when the GlasStile R Type C has been selected.

Accessories:

- Handrail cut outs and provision for proximity reader under glass:

This option is only available if GlasStile R Type C has been selected. The size of the cut out will be dependent upon which reader has been specified (the reader will generally be part of the access control package). Check with Gunnebo UK Ltd Sales Executives for advice on the size and location of the cut out and reader suitability.

- Casework card reader mounting brackets:

This option is only available if GlasStile R Type A or Type B has been selected. The type of bracket will be dependent upon which reader has been specified (the reader will generally be part of the access control package). Check with Gunnebo UK Ltd Sales Executives for advice on the size and location of the bracket and reader suitability.

- Push button control:

Push button mounted on the casework if GlasStile R Type A or Type B has been selected or on the handrail if GlasStile R Type C has been selected.

- Push bar:

Affixed to the top of each glass leaf to match the casework choice.

- Remote push button console:

Single or double push button mounted in a 200 x 120 x 75 mm stainless steel enclosure with timber ends.

- Remote control unit for multiple lane control:

MP Touch is a full colour touch screen control unit consisting of panel switches which can change the operational mode of the entrance control products connected to it. It can control up to a maximum of 30 gates or lanes.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-35/349 Stainless steel half height turnstiles

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Gunnebo UK Ltd

Tel:

+44 (0)1902 455111

Product reference

[GlasStile R Type A]
[GlasStile R Type B]
[GlasStile R Type C]

External diameter

[1350 mm]
[1500 mm]

Orientation

[Pass left]
[Pass right]

Rotor cladding and casework

[Grained stainless steel]
[Polished stainless steel]

Handrail

 - Material:
[As standard]
[Marble]
[Granite]
 
 - Profile:
[Chevron]
[Chicane]
 

Accessories

[Handrail cut out and provision for proximity reader under glass]
[Casework card reader mounting bracket]
[Push button control]
[Push bar]
[Remote double push button console (normally open contacts)]
[MP Touch]
-
Remote control unit for multiple lane control.

Manufacturer details

Gunnebo Entrance Control Ltd,
The Gate House,
Ashdown Business Park, Michael Way,
Maresfield, TN22 2DU
Tel +44 (0)1902 455111
Fax +44 (0)1902 351961
NBS Plus
NBS National BIM Library
RIBA CPD