Home > Companies > Gunnebo UK Ltd > PedGate

Full-height pedestrian gate for external installation. Hand-operated to be installed alongside RotaSec lanes.

Available with manual or electric lock options. Aesthetic and robust design available with 1100 mm passageway for wheelchair or disable/ service access. Passage in both directions via handle and mechanical lock. With electric lock option, passage electronically controllable. On receiving a signal from the access control system or push button, the unit will unlock for a few seconds to allow passage. If no passage takes place, the unit will automatically lock.

Supplied in a kit form, the range includes painted and stainless steel finish. Customization is also an option. PedGate complements both the RotaSec BA and RotaSec EV units.

An optional 50 mm diameter LED display pictogram with illuminated symbols integrated into the reader box is available.

Features and benefits:

  • Leave aisle timeout (with electrical lock option).
  • Anti-crawling barrier.
  • Manually operated door leaves.
  • Logic voltage 24 Vac (electric lock option).
  • Anti-pinching design construction.
  • With the mechanical look, in the case of a power-off scenario, the gate remains locked if this was the status before the power-off event. With the electric lock option, the gate can be pushed open (fail open), or can be factory set to remain locked as an option if desired (fail lock).


  • Petrochemical and construction sites.
  • Stadia.
  • Ports and harbours.
  • Government buildings and embassies.

Standard product features

Size (overall h x w x l):

2172 x 175 x 1372 m. 2393 mm high with optional bar infill to match RotaSec. 2620 mm high with optional canopy. Additional 8 mm if installed adjacent to a RotaSec with the base plate option.

Passage height:

2100 mm.


85 kg (add 15 kg with optional infill bars; add 70 kg for canopy option).

Technical characteristics:

  • Power supply: 230 VAC (50Hz). [25 VA electric lock option].
  • Operating temperature: -5 to + 50°C. 95% no condensing relative humidity.
  • Flow rate (approximately): 12, 15 or 17 passages per minute, depending on type of access reader used (insertion, swipe or proximity).
  • Cabling and conduit: Through the ground.
  • Control board location: In the roof.
  • IP rating: IP44.
  • Noise level: < 55 dB.
  • Mean cycle between failure (MCBF): 3 million cycles.
  • Mean time to repair (MTTR): <30 minutes.


Material/ Finish:

Available in painted and stainless steel finishes. Any RAL is available on request.

Optional canopy with aluminium frame and transparent or solid polycarbonate infill with stainless steel interface to connect to the main structure, to match with RotaSec BA or EV models. Standard finish includes:

  • Leaf: Corrosion-protection painted grey or stainless steel 1.4301 [304] grade. (1.4401 [316] grade optional).
  • Frame: Corrosion-protection painted grey or stainless steel 1.4301 [304] grade. (1.4401 [316] grade optional).
  • Hinges/ lock: Steel, painted black.
  • Handle: Stainless steel.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-35/369 Carbon steel vertical section gate leaves

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying



Gunnebo UK Ltd


+44 (0)1902 455111

Product reference



[Left hand opening]
[Right hand opening]
In the entrance direction of transit (from unsecure side), the hinges are mounted on the right-hand frame side.

Material/ Finish

[Painted grey, RAL 7004]
[Stainless steel 1.4301 (304) grade]
[Stainless steel 1.4401 (316) grade]


[Additional infill horizontal bars]
For increased security.
[Card reader integration]
[Electric lock]
[Remote control system]

Manufacturer details

Gunnebo Entrance Control Ltd,
The Gate House,
Ashdown Business Park, Michael Way,
Maresfield, TN22 2DU
Tel +44 (0)1902 455111
Fax +44 (0)1902 351961
NBS Plus
NBS National BIM Library