Home > Companies > Decorative Panels Lamination Ltd > Abet Laminati Laminates

High pressure laminate (HPL) laminated on chipboard and medium density fibreboard (MDF), available in a range of colours and surface finishes including woodgrain, textured, magnetic and metallic designs.

Features and benefits:

  • High impact resistance.
  • Scratch resistant.
  • Multifunctional - dry wipe and magnetic options are available.
  • Good wet and dry heat resistance.
  • Easily cleaned.
  • Wet and dry-heat resistant.
  • Good resistance to chemicals.
  • Anti-microbial surface available.
  • Matching edge banding available.
  • High levels of light fastness.
  • Laminated with balancer.
  • Tested to EN 438-2:2016.
  • FSC® certified.


Suitable for a variety of internal residential and commercial uses, including:

  • Educational furniture and fit out.
  • Exhibition fit out.
  • Healthcare furniture and wall panels.
  • Food industry applications.
  • Shop-fitting and retail and fit out.
  • Public buildings furniture and fit out.
  • Fascia panels - vertical and horizontal surfaces.
  • Furniture doors.
  • Work surfaces, including countertops.
  • Wall panels.
  • Cubicles and lockers.
  • Residential and commercial furniture.

Clean with warm water and detergent which does not contain strong acids or acid salts.

Standard product features

Board size (l x w):

3050 x 1220 mm.

Technical characteristics (to EN 438-2:2006):

  • Resistance to surface wear: 150 (revolutions, initial point) (Magnetico and Standard).
  • Resistance to impact: ≥20 N(min) (by small diameter ball, standard).
  • Resistance to scratching: Standard: ≥2 (marked change, smooth finish), ≥3 (moderate change, textured finish). Magnetico: 2 (marked change, smooth finish), 3 (moderate change, textured finish). Metalli: ≥1 (surface distortion, textured finish).
  • Resistance to water vapour: Standard and Magnetico: 3 (moderate change, gloss finish), 4 (slight change, other finish). Metalli: ≥3 (moderate change, other finish).
  • Resistance to dry heat at 160°C: Standard: 3 (moderate change, gloss finish), 4 (slight change, other finish).
  • Resistance to wet heat at 100°C: Standard: 3 (moderate change, gloss finish), 4 (slight change, other finish).
  • Light fastness: Standard and Magnetico: 4 (slight change). Metalli: ≥4 (slight change, grey scale rating).
  • Resistance to staining: Standard and Magentico 5 (no visible change). Metalli >4 (slight change).


Colour/ Finish:

Finish options are dependent on colour choice. Consult manufacturer for information.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-65-95/320 High pressure decorative laminate (HPL or HPDL)

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying



Decorative Panels Lamination Ltd


+44 (0)1484 658341

Product reference

Abet Laminati Laminates

Veneer type

[Standard laminate]

Board materials


Board thickness

[15 mm]
[18 mm]

Colour/ Finish

[ ______ ]


[Not required]
Matching edging available from mainstream suppliers; insert requirements.


[Anti-microbial surface]
[Dry wipe surface]
[Magnetic surface]

Manufacturer details

Decorative Panels Holdings Ltd,
Century house,
Premier way,
West Yorkshire, HX5 9HF
Tel +44 (0)1484 658341
NBS Plus
Other content by this manufacturer:
Company Overview Downloads (20) Products (10)