Home > Companies > SOMMER Group > Garage Door Operator

Garage door operator systems, with a motor carriage which offers space to connect multiple accessories.

pro+ models offer flexible wall or ceiling installation due to the separate control unit housing; no additional power sockets need to be installed on the ceiling. The integrated button in the control unit housing offers additional convenience in the garage.

SOMloq2 Radio:

The bidirectional, rolling code and encrypted radio control system provides maximum security. It transmits bi-directionally, which means that feedback on the send command or the door position can be received. The rolling code is encrypted with 128-bits, the same encryption that is used for online banking. It includes the following features:

  • Individual function assignment when programming the radio control system by the user: Tip, toggle, partial opening, defined OPEN/ CLOSE.
  • Noticeable quality due to confirmation of the radio signal through vibration feedback (with suitable transmitter).
  • Door status display.
  • Targeted light control unit.
  • Pre-programmed at the factory.
  • Reduction of radiation exposure despite higher data throughput in package mode.
  • Increase in reliability and range due to active forwarding (hop function).
  • Auto-repeat function for convenient opening while approaching the object.
  • Distance-dependent dead-man function for set-up mode.

Useful extensions such as the Memo memory space extension, the Senso humidity sensor and other accessory modules are also available. Additional connection options are located directly on carriage (pass door contact and safety contact strip OSE or 8k2). The modular system means that extensions can be installed quickly and easily. Since the connections are located directly on the carriage, no spiral cables are necessary, saving time and money.

Features and benefits:

  • Battery pack provided for power failures: During a power failure, the operator can be run in emergency mode with the battery pack, and the door remains operational.
  • Restriction of closing forces: The system monitors the closing forces according to BS EN 12445 by means of Dynamic Power System (DPS) electronic motor monitoring. The control mechanism creates maximum security.
  • Emergency release: The integrated SOMMER emergency release system means the carriage can be engaged and disengaged in any position. This ensures security in any position, even if there is a power failure.
  • Environmental and cost efficiency: The energy-saving operator consumes approximately <1 W of energy a year in standby mode. It is thereby inexpensive to operate and environmentally-friendly.
  • Safety lighting: Lighting is integrated in the carriage which provides constant lighting to the area of door travel. The LED lighting is equipped with six individual LEDs which are switched to two safety circuits.
  • Smooth-running and long-lasting: Gear-saving technology means the garage door operator is quiet, low-wear and has a long lifespan. The operator is completely maintenance-free.
  • Optimal application of force: The motor track carriage moves itself along a permanently tensioned chain so that no frictional loss and no loss of power occurs as is the case with a revolving chain.
  • Clean chain: The galvanized chain is maintenance-free and does not need to be oiled. This prevents oil spots on the garage floor, door or parked vehicles.
  • Improved fire prevention: Due to the flame-resistant materials, the operator offers a high safety factor and reduces fires risk.
  • Universal use: Compatible with almost all door types.
  • Five-year warranty on the operator technology, the motor and the motor control unit.
  • HomeLink® compatible.

Consult manufacturer's literature for further details.

Applications:

Suitable for sectional doors, overhead doors, up-and-over doors, swing doors, hinged double doors, side-opening sectional doors, side-opening doors and sliding doors in buildings.

Standard product features

Maximum door size (w x h):

  • Sectional door: S 9060 base+/ pro+: 4500 x 2500 mm; S 9080 base+/ pro+: 6000 x 2500 mm; S 9110 base+/ pro+: 8000 x 2500 mm.
  • One-piece door: S 9060 base+/ pro+: 4500 x 2750 mm; S 9080 base+/ pro+: 6000 x 2750 mm; S 9110 base+/ pro+: 8000 x 2750 mm.
  • Up-and-over door: S 9060 base+/ pro+: 4500 x 2050 mm; S 9080 base+/ pro+: 6000 x 2050 mm; S 9110 base+/ pro+: 8000 x 2050 mm.
  • Hinged double door: S 9060 base+/ pro+: 2800 x 2500 mm; S 9080 base+/ pro+: 2800 x 2750 mm; S 9110 base+/ pro+: 2800 x 3000 mm.
  • Side-opening sectional/ side-opening door: S 9060 base+/ pro+: 2500 (4500) x 2500 mm; S 9080 base+/ pro+: 2500 (5750) x 2750 mm; S 9110 base+/ pro+: 2500 (6850) x 3000 mm.

Maximum travel path:

7500 mm.

Travel length:

  • Standard: 2750 mm.
  • Maximum (extended): S 9060 base+/ pro+: 4900 mm (two extensions of 1096 mm); S 9080 base+/ pro+: 6000 mm (three extensions of 1096 mm); S 9110 base+/ pro+: 7100 mm (four extensions of 1096 mm).

Maximum door weight:

  • S 9060 base+/ pro+: 120 kg.
  • S 9080 base+/ pro+: 160 kg.
  • S 9110 base+/ pro+: 200 kg.

Maximum running speed:

  • S 9060 base+/ pro+: 240 mm/s.
  • S 9080 base+/ pro+: 210 mm/s.
  • S 9110 base+/ pro+: 180 mm/s.

Safety features:

  • Motor with high automatic locking and counter-pressure at all points in the event of an attempted break-in (even with ventilation function).
  • Safety in use in the event of a power failure with battery pack for emergency operation.
  • Safety Locking System (SLS): Thanks to the integrated emergency release, the carriage can be engaged and disengaged in any position.
  • Permanent RAM/ ROM test.
  • Cyclically tested safety devices.
  • Intelligent differentiation between necessary force for door operation and unusual obstacles.
  • Additional blockage detection.
  • Software fulfils safety class II.
  • EMC test in accordance with SOMMER house standard.

Technical characteristics:

  • Power consumption (power-saving mode): <1 W.
  • Duty cycle after S3: 40%.
  • Number of radio memory positions: 40.
  • Maximum recommended number of spaces: S 9060 base+/ pro +and S 9110 base+/ pro+: 30; S 9080 base+/ pro+: 50.

Options

Accessories:

  • Accu: Supplies energy to the operator for maximum 5 door cycles > in the event of a power failure.
  • Additional fitting for hinged double doors (actuation arm).
  • Additional fitting for low headroom bracket.
  • Alarm/ Warning Buzzer: Two functions in one product: The alarm buzzer recognises a break-in attempt and outputs a loud signal tone. The warning buzzer, on the other hand, outputs an acoustic signal during the closing process or when the pass door is open.
  • Conex: Allows the connection of two corded pulse buttons for control of the door and one external lighting unit. The operating mode ‘Defined opening’ and ‘Defined closing’ is optional.
  • LIFTer: For easier and more convenient installation of the tension springs on sectional doors. It is no longer necessary to lift the door yourself, making installation of the door even easier and quicker.
  • Lock Locking Magnet: Magnet motor lock which mechanically blocks the motor in any position (even with ventilation function) up to an attack force of 300 kg, thereby improving the existing break-in protection.
  • Lumi pro+: Additional LED lighting for the wall control. It is switched in parallel with the lighting in the carriages and can be easily switched on and off using the light function by means of a transmitter.
  • Lumi base+: Additional LED lighting for the roof control. It is switched in parallel with the lighting in the carriage and can be easily switched on and off using the light function by means of a transmitter.
  • Memo: Used to expand the memory to 450 transmitter commands. During service, saved data can be easily adopted for a new carriage.
  • Motion: A passive infrared sensor detects invisible thermal radiation from moving bodies (people/ animals, etc.) and reacts. When you enter the garage, the lighting on the operator is automatically switched on (supplemental lighting/ relay) so that you can move around safely.
  • Output OC: Transfers the door status (open/ closed) to Smart Home systems. Optionally, a further external lighting unit can be operated.
  • Parking Position Laser: Gives optical assistance for perfectly positioning a vehicle in the garage. The laser is active during the opening process and the set light burning time.
  • Pearl Status.
  • Relay: Additional relay for additional switching of a garage or courtyard light or another 230 V appliance.
  • Senso: For measuring temperature and air humidity in the garage. The carriage automatically opens the door a bit if necessary (e.g. when the air humidity is too high), ensuring perfect circulation. When the optimal value has been achieved, the door is closed, reducing the risk of mould formation.
  • Vehicle wall holder for Pearl transmitter.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-28/374 Up-and-over doorsets

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

SOMMER Group

Tel:

+44(0)1904 608787

Product reference

[S 9060 base+]
-
600 N (maximum) pull and pushing force.
[S 9060 pro+]
-
Separate control unit housing, 600 N (maximum) pull and pushing force.
[S 9080 base+]
-
800 N (maximum) pull and pushing force.
[S 9080 pro+]
-
Separate control unit housing, 800 N (maximum) pull and pushing force.
[S 9110 base+]
-
1100 N (maximum) pull and pushing force.
[S 9110 pro+]
-
Separate control unit housing, 1100 N (maximum) pull and pushing force.

Accessories

[ ______ ]

Manufacturer details

B3 Elvington Industrial Estate,
York Road,
Elvington,
York,
Yorkshire, YO41 4AR
Tel +44(0)1904 608787
Fax +44(0)1904 607299
NBS Plus
Other content by this manufacturer:
Company Overview Downloads (13) Products (6)