Home > Companies > SMET Building Products Ltd > CASEA Sudanit 300 Binder

Sudanit 300 Anhydrite Binder is a specially formulated calcium sulfate binder suitable for the production of top quality self-levelling (flowing) floor screeds, simply by blending with a suitable sand and water on site or readymix plant. CASEA Sudanit 300 Binder complies with BS EN 13454-1and is CE marked.

Benefits:

  • Sufficient open time.
  • Pumpable – high flowability.
  • Early trafficking.
  • Very low shrinkage.
  • Reduced drying times.
  • CE marked.
  • BS EN 13454-1.

Applications:

CASEA Sudanit 300 Screed is suitable for floors in homes, offices, public buildings and places exposed to similar loads. It may be applied as a levelling screed directly onto a load bearing floor, unbonded on a separating barrier (polythene) or as a floating floor and is particularly suited in conjunction with underfloor heating or cavity floors. It should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet. If a cement based adhesive or smoothing compound is required, the surface of the screed must first be sealed, using an appropriate acrylic primer/ sealer.

Related literature

The following content references this product:

Standard product features

Designation:

CA-C30-F7.

Technical characteristics (to EN 13813: 2002):

  • Maximum thickness: 90 mm.
  • Minimum thickness: Bonded, 20 mm. Unbonded, 30 mm. Domestic, 35 mm. Commercial, 40 mm. Over underfloor heating pipes: 25 mm (BS 8204-7).
  • Use: Internal.
  • Compressive strength (28 days): >25 N/mm².
  • Flexural strength (28 days): > 5 N/mm².
  • Tensile adhesion: > 1.5 N/mm².
  • Shrinkage (28 days): < 0.1%.
  • Hardening time (before foot traffic): 8–12 hours.
  • Recommend water content: 14–16%.
  • Reaction to fire: A1 non-combustible.
  • Thermal conductivity: 1.6 W/mK.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-55-10/325 Self-smoothing calcium sulfate screeds (ready mixed)

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

SMET Building Products Ltd

Tel:

+44 (0)28 30266833

Product reference

CASEA Sudanit 300 Binder

Manufacturer details

93A Belfast Road,
Newry,
Co Down, BT34 1QH
Tel +44 (0)28 30266833
Fax +44 (0)28 30267619
NBS Plus
NBS National BIM Library