Home > Companies > CCL Wetrooms > Modular Wet-Floor System

The Modular Wet-Floor system can be used in a number of configurations to create a wetroom on a timber floor.

The system is versatile, cost effective and can be installed with the linear drain in either the centre of the shower area, or neatly positioned against the wall. Consisting of three main elements, the system is simple to configure.

System components:

  • Drainage component manufactured from tough ABS plastic.
  • 1200 mm wide tapered board (22–11 mm) manufactured from XPS foam with a mineral coating.
  • Floor or wall grill (1.4401 [316] grade stainless steel) to suit wetroom layout.

Features and benefits:

  • The drainage component and tapered boards can be easily trimmed on-site, making the whole system quick and easy to install. Two or more drainage components can be used to create larger shower areas.
  • One or two way fall.
  • Tapered boards available in nine sizes from stock.
  • Ideal for large format tiles.
  • Floor or wall height adjustable grill option.
  • Variable waste position.
  • Grills available in 15 standard lengths from stock.
  • Flow rate up to 68 L/ min.
  • Lifetime guarantee.

Waterproofing membrane:

CCL Wetrooms RIW Tilesafe membrane is applied to the entire wetroom floor, extending at least an additional metre outside of the shower area. RIW FWM should then be applied to the walls of the shower area, and overlapped onto the RIW Tilesafe Reinforcing Tape (specified separately).

Related literature

The following content references this product:

Standard product features

Grill height and width:

  • The height of the grill is adjustable in 1 mm increments to suit tile thicknesses of between 6–20 mm. Additional spacers are available on request for tiles thicker than 20 mm.
  • The wall grill width is adjustable to allow for different wall tile thicknesses.

Options

Tile trims:

Only required for wetrooms with glass screens. The decorative stainless steel tile trim ensures a smooth transition from the edge of the tapered board across the wetroom floor.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
35-70-70/114 Shower area assembly

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

CCL Wetrooms

Tel:

+44 (0)844 3276002

Product reference

Modular Wet Floor System

Drainage component

[MDC-1]
-
One trap. Flow rate: 25 L/ min.
[MDC-2]
-
Two traps. Flow rate: 50 L/ min.
[MDC-3]
-
Three traps. Flow rate: 68 L/ min.

Tapered board

[MTB-03 300 x 1200 mm]
[MTB-05 500 x 1200 mm]
[MTB-07 700 x 1200 mm]
[MTB-08 800 x 1200 mm]
[MTB-09 900 x 1200 mm]
[MTB-10 1000 x 1200 mm]
[MTB-11 1100 x 1200 mm]
[MTB-12 1200 x 1200 mm]
[MTB-15 1500 x 1200 mm]
[MIP-I Infill panel 300 x 600 mm]

Grill

 - Type:
[MFG-06 600 mm]
-
Floor grill.
[MFG-07 700 mm]
-
Floor grill.
[MFG-08 800 mm]
-
Floor grill.
[MFG-09 900 mm]
-
Floor grill.
[MFG-10 1000 mm]
-
Floor grill.
[MFG-11 1100 mm]
-
Floor grill.
[MFG-12 1200 mm]
-
Floor grill.
[MFG-13 1300 mm]
-
Floor grill.
[MFG-14 1400 mm]
-
Floor grill.
[MFG-15 1500 mm]
-
Floor grill.
[MFG-16 1600 mm]
-
Floor grill.
[MFG-17 1700 mm]
-
Floor grill.
[MFG-18 1800 mm]
-
Floor grill.
[MFG-19 1900 mm]
-
Floor grill.
[MFG-20 2000 mm]
-
Floor grill.
[MWG-06 600 mm]
-
Wall grill.
[MWG-07 700 mm]
-
Wall grill.
[MWG-08 800 mm]
-
Wall grill.
[MWG-09 900 mm]
-
Wall grill.
[MWG-10 1000 mm]
-
Wall grill.
[MWG-11 1100 mm]
-
Wall grill.
[MWG-12 1200 mm]
-
Wall grill.
[MWG-13 1300 mm]
-
Wall grill.
[MWG-14 1400 mm]
-
Wall grill.
[MWG-15 1500 mm]
-
Wall grill.
[MWG-16 1600 mm]
-
Wall grill.
[MWG-17 1700 mm]
-
Wall grill.
[MWG-18 1800 mm]
-
Wall grill.
[MWG-19 1900 mm]
-
Wall grill.
[MWG-20 2000 mm]
-
Wall grill.
 
 - Finish:
[Type A]
-
Solid grill, grained stainless steel with 5 mm gap around the grill.
[Type B]
-
Oblong slots, three rows of oblong slots in a grained stainless steel finish.
[Type C]
-
Square holes, three rows of squares in a grained stainless steel finish.
[Type F]
-
Frameless grill, suitable for use with natural stone and porcelain tiles.
[Type S]
-
Stone infill, allows a section of tile to be inserted to provide a sleek continuous finish. Suitable for 10–12 mm stone/ porcelain tiles.
 

Tile trims

[MTT-05 MWF tile trim]
-
For 500 mm tapered board.
[MTT-07 MWF tile trim]
-
For 700 mm tapered board.
[MTT-08 MWF tile trim]
-
For 800 mm tapered board.
[MTT-09 MWF tile trim]
-
For 900 mm tapered board.
[MTT-10 MWF tile trim]
-
For 1000 mm tapered board.
[MTT-11 MWF tile trim]
-
For 1100 mm tapered board.
[MTT-12 MWF tile trim]
-
For 1200 mm tapered board.
[MTT-15 MWF tile trim]
-
For 1500 mm tapered board.

Manufacturer details

Lodge Farm,
Hook Road,
North Warnborough,
Hook,
Hampshire, RG29 1HA
Tel +44 (0)844 3276002
Fax +44 (0)1256 765100
NBS Plus