Home > Companies > Expamet Building Products > SPH Joist Hangers

Features:

  • Single piece, non-welded construction.
  • Wider masonry flange to increase loadings on masonry of compressive strength 2.8 N/ mm² and greater.
  • Manufactured from 2 mm thick pre-galvanized mild steel to BS EN 10346: 2009, DX51D + Z600.
  • 75 mm load bearing surfaces.
  • All hangers 150 mm deep and over are manufactured 10 mm less to allow for notching and regularization of timber joists.
  • Gusset nail holes are non-coaxial.

Additional requirements:

  • Nail to the joist through the holes in each side gusset with BAT 3.75 x 30 mm long square twisted sherardized nails.
  • HD restraint straps must be used with all types of SPH joist hangers to provide lateral restraint.

Options

Safe working loads:

Please refer to manufacturer's literature for safe working load details of the joist hangers in combination with different masonry strengths.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-50-50/410 Joist hangers

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Expamet Building Products

Tel:

+44 (0)191 410 6631

Product reference

SPH Joist Hangers

Type

[Return]
[Standard]
[Straddle]

Size

 - Depth:
[100 mm]
[125 mm]
[140 mm]
[165 mm]
[190 mm]
[215 mm]
[240 mm]
[265 mm]
 
 - Width:
[38 mm]
[44 mm]
[47 mm]
[50 mm]
[63 mm]
[75 mm]
[100 mm]
[125 mm]
[150 mm]
 
 - Top flange:
[ ______ ]
 

Manufacturer details

Mary Avenue,
Birtley,
Co Durham, DH3 1JF
Tel +44 (0)191 410 6631
Fax +44 (0)191 410 0650
NBS Plus
Other content by this manufacturer:
Company Overview Downloads (4) Products (30)