Home > Companies > Eagle Automation Systems Ltd > Bi-Folding Trackless Speed Gate

The Eagle trackless bi-folding speed gate comprises a unique drive mechanism to control the opening and closing of a bi folding set of gates. This mechanism converts and controls both leaves producing a smooth but fast action. This unique design allows the gate to operate without the use of a bottom or top track, thus eliminating any height restrictions and large tracks in the road.

Operation:

On entrance activation, the gates open in a quick but safe folding action. On approaching the gates from the inside, a vehicle will drive over an internal safety/exit loop. Traffic lights, if installed, indicate the gates are about to move and go green when safe to enter or exit. The gates stay open and then close after all the safety devices are clear and/or after a set time. An anti tail-gating function can be enabled to control traffic flow.

Features:

  • Galvanized and powder coated finish.
  • Heavy duty hydraulic ram with PLC controlled slowdown in both opening and closing movement.
  • Hydraulic design, low maintenance with minimal moving parts.
  • Smooth and quiet operation.
  • Trackless design, no height restrictions and lower maintenance.
  • Very secure with opening and closing in approximately 7 seconds.

Related literature

The following content references this product:

Standard product features

Construction:

Manufactured from 50 x 50 mm carbon steel box section with 25 mm bars spaced at approximately 100 mm intervals.

Posts:

400 x 200 mm square posts.

Drive and controls:

  • 100% duty cycle rated.
  • 240 V 16 A supply.
  • Anti tail-gating option.
  • Controls housed in the posts with secure steel door.
  • High quality heavy duty hinges incorporating sealed bearings for smooth and long life operation.
  • Hydraulic power pack.
  • Network capability for remote monitoring.
  • PLC design with frequency invertor speed control.

Safety:

  • Complies with gate safety standard BS EN 13241-1.
  • Hi/Lo safety photocells.
  • Manual release in the event of power failure.
  • Protected with CAT3 safety edges.
  • Safety loops.

Options

Size:

Typically, the height of the gate is 2400 mm but can be designed to unique requirements with the manufacturer's in house design team.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-58/320 Heavy-duty sliding barriers

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Eagle Automation Systems Ltd

Tel:

+44 (0)1992 524800

Product reference

EAGBFG003

Size (w x h)

[ ______ ]

Colour

RAL - Insert colour requirement.

Access control

[Automatic Number Plate Recognition (ANPR)]
[Card reader]
[Digital keypad]
[Radio control system]
[Push button control]

Gate infill

[Not required]
[Acoustic solid]
[Bar]
[Bar and Weldmesh]
[Ornate]
[Palisade]
[Perforated steel sheet]
[Weldmesh]
[Special order]
-
Insert requirements.

Top protection

[Not required]
[55 mm serrated edge]
[Barbed tape]
[Barbed wire]
[Long blunted spikes]
[Palisade struts]
[Rotating serrated edge on a revolving tube]
[Rotating spikes]

Accessories

[None]
[Signage]
[Traffic lights]

Manufacturer details

Unit 2, New House Farm,
Vicarage Lane,
North Weald,
Essex, CM16 6AP
Tel +44 (0)1992 524800
Fax +44 (0)1992 522208
NBS Plus