Home > Companies > Eagle Automation Systems Ltd > Cantilever Sliding Gates

The Eagle cantilever sliding gate is designed to suit either an industry standard motor and drive or a bespoke Eagle PLC control system. The cantilever gate allows the system to open and close without the need of a track, thus eliminating any height restrictions and large tracks in the road.

Operation:

On entrance activation, the sliding gate opens in a quick but safe sliding action. On approaching the gate from the inside, a vehicle will drive over an internal safety/exit loop. Traffic lights, if installed, indicate the gates are about to move and go green when safe to enter or exit. The gate stays open and then closes after all the safety devices are clear and/or after a set time. An anti tail-gating function can be enabled to control traffic flow.

Features:

  • Low maintenance with minimal moving parts.
  • Smooth and quiet operation.
  • Trackless design, no height restrictions and lower maintenance.
  • Very secure, with an opening and closing speed of 150 mm/ second or a high speed unit available at 400 mm/ second.
  • Zinc phosphate and powder coated finish.

Related literature

The following content references this product:

Standard product features

Construction:

Manufactured from 50 x 50 mm carbon steel box section, 100 mm bottom rail with 25 mm bars spaced at approximately 100 mm intervals.

Posts:

400 x 200 mm square posts.

Drive and controls:

  • 240 V 16 A supply.
  • Anti tail-gating option.
  • Heavy duty cantilever rolling gear to suit the size and weight of gate.
  • PLC design with frequency invertor speed control.
  • The gate is supported on posts with high quality bearings and rollers to reduce noise and vibration.

Safety:

  • Complies with gate safety standard BS EN 13241-1.
  • Hi/Lo safety photocells.
  • Manual release in the event of power failure.
  • Protected with CAT3 safety edges.
  • Safety loops.

Options

Size:

Typically, the height of the gate is 2400 mm but can be designed to unique requirements with the manufacturer's in house design team.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-58/320 Heavy-duty sliding barriers

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Eagle Automation Systems Ltd

Tel:

+44 (0)1992 524800

Product reference

EAGCSLG001

Size (w x h)

[ ______ ]

Colour

RAL - Insert colour requirement.

Operation

[3 phase motor]
[24 V motor]

Speed

[Manufacturer's standard]
-
150 mm/ second.
[High speed]
-
400 mm/ second.

Access control

[Automatic Number Plate Recognition (ANPR)]
[Card reader]
[Digital keypad]
[Radio control system]
[Push button control]

Gate infill

[Not required]
[Acoustic solid]
[Bar]
[Bar and Weldmesh]
[Ornate]
[Palisade]
[Perforated steel sheet]
[Weldmesh]
[Special order]
-
Insert requirements.

Top protection

[Not required]
[55 mm serrated edge]
[Barbed tape]
[Barbed wire]
[Long blunted spikes]
[Palisade struts]
[Rotating serrated edge on a revolving tube]
[Rotating spikes]

Accessories

[None]
[Signage]
[Traffic lights]

Manufacturer details

Unit 2, New House Farm,
Vicarage Lane,
North Weald,
Essex, CM16 6AP
Tel +44 (0)1992 524800
Fax +44 (0)1992 522208
NBS Plus