Home > Companies > Anderson, GEC Ltd > Stainless Steel Worktops

Worktop products are manufactured using 1 mm, 1.25 mm, 1.5 mm and 2 mm brushed-satin stainless steel of domestic grade (EN 1.4301) or alternatively, acid resisting grade for laboratories/ special environments (EN 1.4401) – the actual gauge is normally dependent on size of item. GEC Anderson stainless steel is highly durable, resilient to heat, fire and sustained heavy use and is aseptic (totally hygienic). It is 100% recyclable.

Areas of use:

  • Domestic and commercial kitchens, kitchenettes and tea points.
  • Bathrooms, washrooms, conveniences and utility rooms.
  • Laboratories, surgeries and specialist areas.
  • General spaces including restaurants, bars and passageways.

Finishes/ features:

Textured finish:

  • The raised pattern facilitates drainage, hides smudges and scratches and is just as easy to clean. Textured finish applies to entire work surface, excluding bowls. It is not available for L- shaped tops.
  • Size (maximum): 2400 x 1150 mm.

Brushed satin finish:

  • Can be used to produce tops in all shapes and sizes.
  • Available with a range of various edge details to suit the application.
  • The worktops can be made to measure in any shape or size, without joints, in one continuous flat (not sloping or fluted) surface.
  • Bowls and cut-outs for appliances can be positioned precisely where required by the installation design.


Other requirements:

  • Cut-outs for appliances/ fittings; give details.
  • Special fixings and clearances for pipework – seek advice from GEC Anderson.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-35-95/315 Worktops

Product specification

An important note about specifying



Anderson, GEC Ltd


+44 (0)1442 826999

Product reference

Made To Measure Stainless Steel Worktops


[Stainless steel to EN 1.4301]
[Stainless steel to EN 1.4401]

Finish/ Colour



As drawing ___ - Any length available.


As drawing ___ - Any width available.

Exposed edges

[Edge 1]
Watersafe back edge for tiling.
[Edge 2]
Watersafe side edge.
[Edge 3]
Watersafe front edge.
[Edge 4]
Anti-drip side/ back edge.
[Edge 5]
Anti-drip front edge.
[Edge 6]
Square back/ side up-stand.
[Edge 7]
Square front edge.
[Edge 8]
Square side/ back edge.
[Edge 10]
Back/ side up-stand.
[Edge 10R]
Back/ side up-stand.
[HTM63 Edges]
Bullnose front and back up-stand.
[Inset Edge]

Other requirements

[Not required]
[As drawing ___]
[Cut-outs for appliances]
[Fixing and clearance for pipework]

Manufacturer details

Shire Lane,
Hertfordshire, HP23 6LY
Tel +44 (0)1442 826999
Fax +44 (0)1442 825999
NBS Plus
NBS National BIM Library