Home > Companies > Helifix > CemTie

A fully grouted remedial wall tie and restraint solution using 8 or 10 mm diameter helical, 304 or 316 stainless steel ties. The CemTie is injection grouted into predrilled holes with Helifix ‘Helibond’ high performance cementitious grout. Designed for stabilising solid or rubble filled walls, lintel repairs, securing multi-layer brick rings in bridges, tunnels and arches, reconnecting separated internal and external building walls, repairing and securing parapets, cornices and decorative fascias and stabilization of a wide range of masonry structures in all environments.

CemTie can be used in conjunction with other Helifix techniques as part of the HeliBeam™ System for cost effectively restoring and enhancing the structural integrity and load bearing capabilities of buildings and structures.

Vertical and horizontal spacing:

Typically 450mm x 450mm grid. Consult with Helifix Ltd for recommendations and details.

Depth of hole:

300 mm past any cracking. Consult with Helifix Ltd for recommendations and details.



Supplied in packs of ten.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-95/340 Stainless steel drive ties

Product specification

An important note about specifying





+44 (0)20 8735 5200

Product reference



[8 mm]
[10 mm]


[400 mm]
[500 mm]
[600 mm]
[700 mm]
[800 mm]
[900 mm]
[1000 mm]


HeliBond cementitious grout

Manufacturer details

The Mille ,
1000 Great West Road ,
London, TW8 9DW
Tel +44 (0)20 8735 5200
Fax +44 (0)20 8735 5201
NBS Plus
NBS National BIM Library