Newton Titan-Pro is designed specifically to be used with Newton CDM, the Type C, internally applied, cavity drain waterproofing system. The adjustable neck allows for the sump to be installed at a fixed height relative to the slab so that the connection in from the Newton drainage system and the pump discharge line are made above the concrete and always at the same height relative to the slab or raft. The sump can be used with single pumps, twin pumps and twin pumps with twin discharge lines for greater pump efficiency.

The unique sump shape, together with a choice of inlet and outlet positions, allow for connections in and out of the chamber to be made to either a side wall, or to a corner.

Features:

  • Manufactured from robust high-density polyethylene (HDPE) and should provide a chamber for the lifetime of the building.
  • Compatible with a large number of Newton NP and CP clean water pumps.
  • Fully built system includes all internal pipe and pipe fittings ready for 50 mm or 63 mm rising main.
  • One-way valve for each pump included.
  • Two quick release couplings per pump for easy installation and removal for servicing.
  • Adjustable neck ensures that the lid is always at the correct height regardless of floor finishes.
  • Newton PA50 High Water Level Alarm included with pump and pipe kits (TP3 - TP47).
  • Supplied with sealed and locked recessed lid. High end finish lids and frames are available.
  • Flat areas to the side of chamber are ready for wall flanges to receive incoming 110 mm drainage pipes. Wall flanges are available.
  • Large foot to base of chamber to prevent flotation.
  • Anti-drip system available for the inside of the chamber.
  • Wet-install kit available that includes pressure release valves and tremie pipe for installations where water is entering the excavation.

Applications:

Specifically designed to be used with Newton System 500, the ‘Type C’ cavity drain waterproofing system.

Related literature

The following content references this product:

Options

Pump:

The Titan-Pro pumping system can be supplied with single or dual automatic or manual pumps, with single or dual pipe discharge lines.

Power converter:

The Victron Inverter/ Charger units draw 12 V power from a single or a bank of 12 V batteries which is inverted into clean, pure sine wave, 230 V power to ensure that the Newton Pump continues to operate even during a power outage.

Control panel:

The panel features interface for use with Newton battery back-up and telemetry systems as well as connections to whole house alarm and monitoring systems. The control panel PCB is split with two separate circuits, ensuring that pumping will continue even if one of the control circuits should fail.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
90-10-70/450 Package pumping stations

Product specification

An important note about specifying

Manufacturer

Name:

Newton Waterproofing Systems

Tel:

+44 (0)1732 360095

Product reference

Titan-Pro

Pump

[Newton CP250 (P29)]
-
250 W manual pump.
[Newton CP250 (P31)]
-
250 W automatic pump with vertical float suitable for ground and surface water.
[Newton CP400 (P28)]
-
400 W manual pump.
[Newton CP400 (P32)]
-
400 W automatic pump with vertical float suitable for ground and surface water.
[Newton NP400 (P2/ P3)]
-
400 W automatic/ manual pump with vertical float suitable for ground and surface water.
[Newton CP750 (P33)]
-
750 W pump Automatic pump with vertical float suitable for ground and surface.
[Newton NP750 (P5/ P6)]
-
750 W automatic pump with vertical float suitable for ground and surface water.

Frame/ lid

[Alulite, triple-sealed recessed lid]
-
600 x 600 mm, with 450 x 450 mm opening.
[Brass edged, recessed lid]
-
600 x 600 mm, with 450 x 450 mm opening.
[Galvanized steel frame, recessed lid]
-
600 x 600 mm, with 450 x 450 mm opening.
[Stainless steel edged, recessed lid]
-
00 x 600 mm, with 450 x 450 mm opening.

Pipework

[50 mm pressure rated]
[63 mm pressure rated]

High water level alarm

9 V battery (PA50) - Switch not suitable for regular contact with sewage.

Power converter

[Not required]
[MultiPlus 12/800/35 (BB1)]
-
Battery back-up facility for pumps of 150 W and 250 W.
[MultiPlus 12/1200/50 (BB2)]
-
Battery back-up facility for pumps of 400 W.
[MultiPlus 12/3000.120 (BB3)]
-
Battery back-up facility for pumps of 750 W.
[Quattro 12/3000/120 (BB4)]
-
Battery back-up facility for all pumps up to 750 W.

Standby batteries

[Northstar NSB 60FT (BB20)]
[Northstar NSB 100FT (BB21)]
[Northstar NSB 190FT (BB22)]

Control panel

[Not required]
[Newton Control Panel Pro (CP2)]
-
Supplied with a vertical water level float switch and water high alarm float switch. Insert number of standby batteries required.
[Newton Control Panel Pro & pre-fitted Newton Dialer (CP7)]
-
Supplied with a vertical water level float switch and water high alarm float switch.
[Newton Pump Controller (CP9)]
-
Supplied with a vertical water level float switch and water high alarm float switch.

Text and speech dialler

[Not required]
[Newton Dialer (PA5)]
-
Can send either text or voice messages to up to five designated phones should an alarm condition occur.

Accessories/ Other requirements

[ ______ ]

Manufacturer details

Newton House,
17-20 Sovereign Way,
Tonbridge,
Kent, TN9 1RH
Tel +44 (0)1732 360095
Fax
NBS Plus
NBS National BIM Library
RIBA CPD