Home > Companies > Helmsman > 04 - System Laminate Lockers - Wet Use

Aluminium laminate lockers in a range of compartment configurations.

Features and benefits:

  • Range of door colours and compartment configurations available.
  • Plant-on doors create a clean, uninterrupted wall of colour.
  • Suitable use in for wet or dry areas.
  • Sturdy construction: Door frame uprights constructed from heavy-duty aluminium.
  • Lockers supplied fully assembled; installation service available.
  • Can be nested on site.

Related literature

The following content references this product:

Standard product features

Construction:

Pop riveted.

  • Body: Aluminium with radiused internal corners.
  • Door frame assembly: Heavy-gauge extruded aluminium, profiled to allow smooth removal of bags.
  • Doors: Plant-on, 10 mm-thick solid grade laminate (SGL) OR 10 mm clear toughened glass silk screened, a range of colours available. Attached to the frame by a continuous aluminium extruded hinge. For health and safety all doors are sprung loaded.
  • Full length single compartment locker includes a hat shelf.
  • Shelves: Manufactured from high strength polymer. (400 mm wide, 500 mm deep or above will be aluminium).
  • Bottom: Manufactured from high strength polymer and is fitted with floor fixing points. (400 mm wide, 500 mm deep or above will be aluminium).
  • Hooks: Full height one and two compartment lockers are supplied with a plastic moulded hook located on the right hand side of each compartment.
  • Locking: When locked, the latch engages in the door frame upright providing increased security. Two patron keys supplied per lock; each key fitted with a key retaining pin complete with an engraved number disc made up of laminated plastic (white numbers on black). Disc is numbered to suit number on compartment door. Two management control keys supplied.

Nesting:

Lockers supplied as single units, and can be nested on site. Note: When preparing locker room layouts, allow approximately 2 mm extra for each locker in a row.

Numbering:

Each door is complete with a laminate plastic number label. Label numbered to suit number on patron key number disc or EXTRA COST - wrist strap.

Optional Ventilation:

Holes in the tops, bottoms and shelves facilitate the flow of air through the locker.

Fixings:

All necessary fixings are supplied so that lockers can be installed in accordance with manufacturer's fixing specification; consult manufacturer for details. Coin operated lockers can be wall mounted (depending upon fabric of proposed mounting wall).

Options

Type:

  • Accessible locker, one compartment: Overall height: 917 mm; compartment height: 837 mm.
  • Full height, one compartment: Overall height: 1800 mm; base to shelf: 1370 mm; shelf to top: 308 mm.
  • Full height, two compartments: Overall height: 1800 mm; compartment heights: 2 x 840 mm.
  • Full height, three compartments, equal: Overall height: 1800 mm; compartment heights: 3 x 545 mm.
  • Full height, three compartments, unequal: Overall height: 1800 mm; compartment heights: 1 x 840 mm, 2 x 400 mm.
  • Full height, four compartments: Overall height: 1800 mm; compartment heights: 4 x 400 mm.
  • Full height, five compartments: Overall height: 1800 mm; compartment heights: 5 x 308 mm.
  • Full height, six compartments: Overall height: 1800 mm; compartment heights: 6 x 250 mm.
  • Half height, one compartment: Overall height: 900 mm; compartment height: 805 mm.

Colour:

- Door:

A wide range of colours available from Helmsman standard colour cards. Consult manufacturer for information.

Locking:

  • Coin operated lock, REFUND/ RETAIN: Accepts one of the following: 1 x 20p, 1 x 50p, 1 x £1 coin, 1 x 1€ or a Helmsman token. Locks will be supplied set to choice of coinage as specified.
  • Coin operated lock, RETAIN: Two cash box keys are supplied. The coin operated locks offer a ‘Hook Bolt’ design which provides engagement into the door frame for high levels of security.
  • The lock is be supplied with removable lock barrels; consult manufacturer for details.
  • Free use coin locks: The free use lock does not require a coin. This is a key operated lock.

Accessories:

- Plinth:

Whilst the locker can be mounted straight to the floor, the manufacturer recommends they be raised slightly above floor level.

- Stands/ seats:

  • Stand frames are manufactured from 40 mm electric resistance welded (ERW) steel tube, zinc plated and coloured.
  • Seats are manufactured from ash hardwood, finished with two coats catalysed lacquer, or solid grade laminate (SGL).

- End panels:

All necessary fixings supplied.

Wristbands:

Available in a variety of colours. Consult manufacturer for information.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-35-80/380 Lockers

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Helmsman

Tel:

+44 (0)1284 727626

Product reference

Sports Lockers

Type

[Accessible locker]
-
Height, 917 mm.
[Full height, one compartment]
-
Height, 1800 mm.
[Full height, two compartments]
-
Height, 1800 mm.
[Full height, three compartments]
-
Height, 1800 mm.
[Full height, four compartments]
-
Height, 1800 mm.
[Full height, five compartments]
-
Height, 1800 mm.
[Full height, six compartments]
-
Height, 1800 mm.
[Half height, one compartment]
-
Height, 1800 mm.
[Special order]
-
Other heights are available on request. Consult manufacturer and insert requirement.

Width/ depth

[300 x 450 mm]
[300 x 500 mm]
[400 x 450 mm]
[400 x 500 mm]
[Special order]
-
Any size is available on request. Consult manufacturer and insert requirement.

Colour

 - Frame:

Aluminium

 
 - Door:
[ ______ ]
 

Locking

[Coin refund lock/ free use]
-
See 'Options' below for acceptable coinage and insert requirements.
[Coin operated lock, RETAIN]
-
Includes coin collection cash box, located on the inside of each door.

Accessories

 - Plinth:
[Not required]
[100 mm-high anodized aluminium]
[Other]
-
Insert requirements.
 
 - Stands/ seats:
[Required]
-
See 'Options' below and consult manufacturer for details.
[Not required]
 
 - End panels:
[Anodized aluminium, single]
[SGL, single]
[SGL, double]
-
For back-to-back configurations.
 
 - Wristbands:
[Required]
-
Consult manufacturer for details.
[Not required]
 

Manufacturer details

1 Northern Way,
Bury St Edmunds,
Suffolk, IP32 6NH
Tel +44 (0)1284 727626
Fax +44 (0)1284 727601
NBS Plus