Home > Companies > Jablite Ltd > Jabfloor White

An expanded polystyrene (EPS) thermal insulation sheet for use in all floor constructions, above or below the damp-proof membrane, for both domestic and commercial buildings.

Jabfloor White 70:

Used for domestic applications.

Jabfloor White 100, 150, 200 & 250:

Used for commercial applications where higher loadings are likely.

Usage:

  • Fitted between or below the joists to provide insulation to suspended timber ground floors (Jabfloor 70 only).
  • Below the concrete slab in solid ground floor constructions.
  • Above the concrete slab with a screed finish in solid ground-floor constructions.
  • Placed above a concrete slab or a pre-cast concrete floor in ground floor constructions and finished with a wearing layer of chipboard.
  • Over pre-cast concrete beam and block or hollow core plank floor systems with a screed or chipboard finish.
  • Perimeter insulation in solid and precast concrete floor constructions.
  • To insulate a basement floor either below the concrete slab or above the concrete slab with a screed or chipboard finish.

Standard product features

Size:

1200 x 2400 mm.

Thermal conductivity:

  • Jabfloor White 70: 0.038 W/mK.
  • Jabfloor White 100: 0.036 W/mK.
  • Jabfloor White 150: 0.035 W/mK.
  • Jabfloor White 200 and 250: 0.034 W/mK.

Compressive strength @ 1% nominal strain:

  • Jabfloor White 70: 20kPa.
  • Jabfloor White 100: 45kPa.
  • Jabfloor White 150: 70kPa.
  • Jabfloor White 200: 90kPa.
  • Jabfloor White 250: 100kPa.

Environmental:

Expanded polystyrene has been awarded an A+ rating by the BRE's Green Guide to Specification.

Options

Type:

Jabfloor White is supplied as EPS 70, 100, 150, 200 and 250 as defined in BS EN 13163. Flame-retardant additive material is available to order.

Thickness:

Ten standard sizes available, other thicknesses available to order.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-45-65/380 Expanded polystyrene (EPS) board

Product specification

An important note about specifying

Manufacturer

Name:

Jablite Ltd

Tel:

+44 (0)870 600 3666

Product reference

[Jabfloor White 70]
[Jabfloor White 100]
[Jabfloor White 150]
[Jabfloor White 200]
[Jabfloor White 250]

Type

[EPS 70]
[EPS 100]
[EPS 150]
[EPS 200]
[EPS 250]

Thickness

[25 mm]
[30 mm]
[40 mm]
[50 mm]
[60 mm]
[75 mm]
[100 mm]
[120 mm]
[150 mm]
[200 mm]

Manufacturer details

Infinity House,
Anderson Way,
Belvedere,
Kent, DA17 6BG
Tel +44 (0)870 600 3666
Fax +44 (0)870 600 2555
NBS Plus
NBS National BIM Library