Home > Companies > ASSA ABLOY Opening Solutions UK & Ireland > ASSA Connect Motor Lock Connect 811S


Motor locks are used in doors with high security requirements and in doors where automatic locking is required. A hookbolt lock can be used in all standard doors as well as in double or sliding doors, where it is important that the door and frame are hooked together. Doors with high opening frequency should include complementary day-time locking, e.g. an electric strike or a solenoid lock.


Communication between the DAC430 control unit and the motor lock is serial with an encrypted opening signal. The lockcase/striking plate has a built-in door monitoring switch (magnetic contact) which can be replaced with an external magnetic contact. With its input and outputs, the DAC430 control unit acts as an interface towards the access control system.

  • 24 V AC/DC. Alt 12 V DC stabilized.
  • Current consumption at 24 V DC, at rest 150 mA, in operation maximum 700 mA (0.1 S).
  • Relay load maximum: 1 A.
  • Distance between lock case and control unit is 50 m (maximum).


The bolt is operated between the locked and unlocked position by the built-in motor. The lock can Connect motor locks require a control unit to which the power supply is connected. This DAC is fitted on the protected side and close to the door. The standard connecting cable between motor lock and control unit DAC is 6 m.


Connect motor locks are delivered in complete sets including motor lock, control unit, 6 m connecting cable and 1487-2 striking plate (1487-8 for 811S/ 35 mm backset) with built-in magnet.

Suitable cylinders:

Scandinavian oval or round:

  • ASSA 5-Pin
  • ASSA Flexcore Plus
  • ASSA 4800
  • ASSA Twin Combi
  • ASSA dp4400

Additional information for this product is available from - http://www.assa.co.uk/en/site/assacouk/Products1/?groupId=644349

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-18/330 Door multipoint and special function locks

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying



ASSA ABLOY Opening Solutions UK & Ireland


+44 (0)1902 364120

Product reference

[Connect 811S]
[Connect 811S/35]
Narrow profile, 35 mm backset.


[35 mm]
Connect 811S/35 only.
[50 mm]
[70 mm]


[ ______ ]

Manufacturer details

School Street,
West Midlands, WV13 3PW
Tel +44 (0)1902 364120
Fax +44 (0)1902 364000
NBS Plus
NBS National BIM Library