Home > Companies > Jewers Doors Ltd > Phoenix Osprey

Phoenix Osprey doors are designed for aeroplane and helicopter hangars, military vehicle garages, workshops, supermarket loading bays, bus garages and power stations.

Key features:

  • Sealed for life, self-lubricating hinges and guides.
  • Flat panel, single piece insulated construction.
  • Weather-tight seals.
  • Easy-clean galvanized bottom guide track with built-in weather bar.
  • Easy to install and maintain.
  • Power operation available for doors up to 100 m².
  • Noise reduction by 25 dB.
  • Configurations to accommodate openings of unlimited width and up to 6 m in height.
  • Multi-leaf construction allows the door to be partially opened when full aperture access is not required.
  • Manual doors can fold within or completely clear of the opening, requiring minimal side and headroom.
  • Power operation is available for openings up to 20 m wide, with a choice of control options and safety devices.

Standard product features

Arrangement:

Top-hung, flat panelled multi-leaf sliding folding door.

Track system:

  • Top track: 5 mm thick pressed channel for direct side wall or soffit mounting with pendant hangers to each leaf, each with a 72 mm sealed bearing wheel, two 40 mm side thrust sealed bearing wheels and toughened steel shaft, fully vertically adjustable.
  • Bottom guide channel: 3 mm thick galvanized steel pressing with built-in threshold and chamfered edges. Bottom guides to be 35 mm nylon rollers running on 16 mm stainless steel shafts.

Door leaf:

- Size (maximum):

  • Width: 20000 mm (manual), 10000 mm (electrical, 1-way), 20000 mm (electrical, bi-part).
  • Height: 6000 mm.

- U-Value:

0.40 W/m²K.

- Thickness:

52 mm.

- Panel construction:

1.6 mm thick cold rolled galvanized dovetail channel frames with 5 mm thick local reinforcement for hardware. The frame is covered on both sides with 0.7 mm thick galvanized steel sheets and pressure injected with CFC free expanded polyurethane insulation during the manufacturing process.

- Intermediate hinges:

Apex hinge pairs are machined from solid aluminium extrusions, fitted with sealed for life Igus bushes and 16 mm diameter stainless steel hinge pins. A concealed peg ensures that the hinge pins cannot be removed from the outside. Hinges are finished in black polyester powder coat to RAL 9005(M). Bottom hinges for 'hinged to the jamb' doors are fitted with a pair of stainless steel thrust bearings.

- Seals:

Flexible rubber seals are fitted to all edges of the door, and between door leaves. All seals are purpose-designed EPDM extrusions, which press into, and blend seamlessly with the door panels. Each seal provides full finger trap safeguarding, and excellent protection against weather, dust and sand.

Locking and handles:

- Manually operated door:

  • Between pairs of leaves to all door configurations: A drop bolt and a black thermoplastic easy-grip pull handle are fitted internally.
  • Active leaf to odd leaf configurations: A drop bolt and a black thermoplastic easy-grip pull handle are fitted internally.

- Power operated door:

All door configurations: Drive motor(s) automatically lock the door in the closed position. A black aluminium pull handle is fitted internally to each leading edge to enable hand operation.

Options

Power operation:

- Equipment:

A range of safety and control equipment is fitted or is available to order.

Wicket door:

  • Emergency panic bar furniture: Emergency escape furniture. Wicket door opens outwards. Hardware comprises a Briton 379 panic bar, external override cylinder and finger latch, 1½ pairs stainless steel butt-hinges and a hidden overhead door limiting stay. 85 mm high step with 40 mm wide aluminium threshold strip.
  • Lever handle furniture: Wicket door opens outwards. Hardware comprises a Briton 5520 mortise sashlock, 25 mm low-profile anodized aluminium lever handles, external Europrofile cylinder with internal thumbturn, 1½ pairs of stainless steel butt hinges and a hidden door limiting stay. 85 mm high step with 40 mm wide aluminium threshold strip.

Vision panels:

  • Option 1: Black thermoplastic ‘easyfit’ (4) window frame with double-glazed clear acrylic safety glass. Overall frame size 680 x 390 mm.
  • Option 2: Aluminium window frame with one-piece inner liner tray. Window units are double glazed (4~20~4), argon filled, low E toughened glass. Frames are polyester powder coated in matt black to RAL 9005(M), fully sealed, and available in a choice of frame sizes.

Safety features:

- Handrail enclosure:

A steel RHS handrail enclosure is supplied to protect the door bunch in the open position. Enclosures can also be used to mount push buttons, photocells and traffic lights. Posts are painted yellow for maximum visibility.

- Photocells:

A FAAC XP15W send/ receive photocell is fitted across the opening. The receiver unit is fitted with a long-life battery to avoid hard wiring. Photocells can be fitted for closing safety, opening safety, or a combination of opening and closing. If a closing safety beam is broken during the closing cycle, the door will automatically stop and re-open. If an opening safety beam is broken during the opening cycle, the door will automatically stop.

- Safety edges:

A full height wireless opto-electronic safety edge is mounted within the leading edge seal(s) of the door. An impact on the edge during closing will automatically stop and re-open the door. The safety edge is continuously monitored so the door cannot close automatically in the event of damage or failure of the edge. A low-battery warning audible alarm will advise when the battery needs to be replaced.

- Traffic lights:

A red and green 24V DC LED traffic light unit is fitted. The unit is sized 370 x 190 mm with 24 LEDs to each light. Sequence of operation is red light on when door closed or part closed, green light on when door fully open.

Additional access controls:

  • Digi-key: Bewator K42 stainless steel codelock for operation of the door by authorized persons only. For internal or external use.
  • Keyswitch: Sprung return keyswitch in separate enclosure for operation of the door by keyholders only. For internal or external use.
  • Mircowave sensor: High level sensor to open the door on detection of oncoming vehicles. Adjustable so as to ignore pedestrians, or parallel traffic. Please note: maximum opening height is 5 m for microwave sensors.
  • Push button: Additional open/ close/ captive stop push button unit.
  • Radio control: 868 MHz radio control system for remote operation of the door from a vehicle or control room. FAAC plug-in radio receiver supplied with one twin channel transmitter. Additional transmitters available for multi-user systems.

NBS Specification

NBS Create logo
This product is associated with the following NBS Create clause:
45-25-28/366 Sliding door and partition sets

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Jewers Doors Ltd

Tel:

+44 (0)1767 317090

Product reference

Phoenix Osprey

Size

[As drawing]
-
Insert drawing reference number where required.
[As schedule]

Arrangement

 - Layout:
[Bi-parting]
[Fold to left]
[Fold to right]
 
 - Type:
[Fully floating]
[Hinged at one jamb]
[Hinged on both jambs]
 

Finish and colour

[Plastisol internal/ external, colour]
-
Insert colour requirements.
[Plastisol internal, Polyester powder coated external (including hinges and trims), colour]
-
Insert colour requirements.
[Polyester powder coated both faces (including all hinges, handles and trims), colour]
-
Insert colour requirements.
[Galvanized steel sheets to both faces]

Operation

[Electric operation with low-level haul chains]
-
All confgurations can be manually operated.
[Manual]
-
All configurations can be manually operated.

Wicket door

[Not required]
[Required, emergency panic bar furniture]
-
Emergency escape furniture.
[Required, lever handle furniture]

Vision panels

[Not required]
[Option 1]
-
Black thermoplastic ‘easyfit’, 680 x 390 mm.
[Option 2, 400 x 600 mm]
[Option 2, 400 x 1200 mm]
[Option 2, 600 x 600 mm]
[Option 2, 600 x 1200 mm]

Hardware

[Drive unit holds door firm]
-
For electric, standard.
[Lever operated floor bolt]
-
For electric.
[Drop bolt and black pull handle]
-
For manual, standard.
[Espagnolette bolts and lever handle]
-
For manual.
[Mortice sashlock and lever handles to odd leaf]
-
For manual odd leaf, standard.
[Drop bolt and black pull handle to odd leaf]
-
For manual odd leaf.
[Espagnolette bolt, lever handle to odd leaf handle]
-
For manual odd leaf.

Controls

 - Type:
[Deadman]
-
Standard, continuous push to open, continuous push to close.
[Fully-automatic]
-
Single push to open, automatic closing after pre-set pause time.
[Semi-automatic]
-
Single push to open, single push to close.
 
 - Actuation/ Safety:
[Light curtain]
[Photocells]
-
Thru-beam synchronized photocell.
[Photocell/ Traffic light posts]
-
RHS right angle steel posts.
[Protective barrier around stack area]
[Safety edges]
-
Full height opto-electronic safety edge.
[Traffic lights]
-
Red and green LED traffic light.
[Wicket door interlock]
 
 - Additional access controls:
[Not required]
[Digi-key]
-
Stainless steel codelock.
[Keyswitch]
-
Sprung return keyswitch in separate enclosure.
[Mircowave sensor]
-
Opens door on detection of oncoming vehicles.
[Push button]
-
Additional open/ close/ captive stop push button unit.
[Radio control]
-
Remote operation of door.
 

Manufacturer details

Stratton Business Park,
Biggleswade,
Bedfordshire, SG18 8QB
Tel +44 (0)1767 317090
Fax +44 (0)1767 601222
NBS Plus
NBS National BIM Library
Other content by this manufacturer:
Company Overview Products (10) BIM (10)