Home > Companies > Addagrip Terraco Ltd > WDE 436 Pigmented

WDE 436 Pigmented is a two component water based epoxy coloured coating available in a wide range of colours or clear with a semi gloss finish. WDE 436 Pigmented is designed for light to medium wear conditions.

Preparation:

All loose substrate material, laitance and contamination to be carefully removed. The surface to be treated must be prepared by grinding, light vacuum assisted shot blasting, diamond grinding or machine sanding with coarse sandpaper. Surfaces contaminated with oil or liquid contamination should be heat blasted with the Addagrip Hot Compressed Air System or degreased as required. Substrates must be swept/ carefully vacuumed to remove debris. All surfaces to be treated must be dry and free from oil/ grease.

Do not apply when the temperature is below 10°C.

Standard product features

Application:

Two coats, roller or rubber squeegee applied. Cure time between coats to be a minimum 4–6 hours or until the surface feels dry and hard. Care should be taken around obstructions and protrusions to make sure that all the surfaces are covered.

Options

Nominal thickness:

Minimum thickness of 86 micrometres per coat – consult with Addagrip for recommendations.

Colour:

Additional colours or colour matching is available on request; consult manufacturer for details.

NBS Specification

NBS Buliding logo
This product is associated with the following NBS clauses:

Product specification

An important note about specifying

Manufacturer

Name:

Addagrip Terraco Ltd

Tel:

+44 (0)1825 761333

Product reference

WDE 436 Pigmented

Resin flooring

 - Application:

Two coats

 
 - Nominal thickness:

___ micrometres

 
 - Colour:
[Battleship Grey (00-A-09)]
[Light Grey (00-A-05)]
[Silver Grey (00-A-01)]
[White]
[Black]
[Tile Red]
 

Manufacturer details

Addagrip House,
Bell Lane Industrial Estate,
Uckfield,
East Sussex, TN22 1QL
Tel +44 (0)1825 761333
Fax
NBS Plus
NBS National BIM Library