Home > Companies > Apollo Fire Detectors Ltd
NBS National BIM Library
The BIM objects listed below are from the NBS National BIM Library, the industry source for generic and proprietary BIM content. The files are created in platform-neutral IFC format as well as the industry's leading 3D CAD format Autodesk Revit.

All NBS National BIM Library objects use the standard property set definitions specified by NBS to create a standard for BIM objects across the construction industry.
Document Thumbnail  
Apollo Waterproof Manual Call Point
Apollo's Waterproof Addressable Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycl...
Open in a new window
 
Document Thumbnail  
Apollo Waterproof Manual Call Point with Isolator
Apollo's Waterproof Addressable Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycl...
Open in a new window
 
Document Thumbnail  
Cat C Loop Powered VAD C-3-15
The VAD has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. This occurs, for example, where there is a high ba...
Open in a new window
 
Document Thumbnail  
Cat C Loop Powered VAD C-3-8.5
The VAD has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. This occurs, for example, where there is a high ba...
Open in a new window
 
Document Thumbnail  
Cat W Loop Powered VAD W-2.5-7
The VAD has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. This occurs, for example, where there is a high ba...
Open in a new window
 
Document Thumbnail  
DIN-Rail Dual Isolator
The DIN-Rail Dual Isolator provides two independent isolators which sense and isolate short circuits on Discovery and XP95 loops and spurs. Loop-powered Polarity sensitive Up to 20 detectors c...
Open in a new window
 
Document Thumbnail  
DIN-Rail Input-Output Unit
The DIN-Rail Input Output Unit provides a voltage free, single pole, change-over relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input. It can report...
Open in a new window
 
Document Thumbnail  
DIN-Rail Interface Enclosure
DIN-Rail Interface Enclosures are available in two sizes and can be used for housing intrinsically safe (IS) barriers or DIN-Rail mounted interfaces. A multi-purpose label that features a section ...
Open in a new window
 
Document Thumbnail  
DIN-Rail Mains Input-Output Unit
The DIN-Rail Mains Switching Input/Output Unit provides a mains-rated voltage-free, single pole change-over relay output and a monitored switch input. The unit supervises one or more normally-open ...
Open in a new window
 
Document Thumbnail  
DIN-Rail Output Unit
The DIN-Rail Output Unit provides a voltage-free single-pole, change-over relay output. It is a simplified version of the Input/Output unit without circuitry for monitoring inputs. Capable of sw...
Open in a new window
 
Document Thumbnail  
DIN-Rail Sounder Controller-5 Amperes
The DIN-Rail Sounder Controller (5 Amperes) is used to control the operation of a zone of externally powered sounders and report their status to the control panel. Allows sounders to be operated...
Open in a new window
 
Document Thumbnail  
DIN-Rail Switch Monitor
The DIN-Rail Switch Monitor is designed to monitor the state of one or more single pole, volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analog...
Open in a new window
 
Document Thumbnail  
DIN-Rail Switch Monitor Plus
The DIN-Rail Switch Monitor Plus is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible a...
Open in a new window
 
Document Thumbnail  
DIN-Rail Zone Monitor with Isolator
The DIN-Rail Zone Monitor with Isolator controls the operation of a zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Discovery or XP95 loop.
Open in a new window
 
Document Thumbnail  
Discovery Carbon Monoxide Detector
The Discovery Carbon Monoxide Detector is good at detecting deep-seated fires. Please note that CO detectors do not detect smoke particles or heat and are not universal replacements for smoke detec...
Open in a new window
 
Document Thumbnail  
Discovery CO-Heat Multisensor Detector
The Discovery CO/Heat Multisensor Detector is good at detecting deep-seated smouldering fires which give off a lot of CO as well as flaming fires. They are ideal for use in hotel bedrooms where ste...
Open in a new window
 
Document Thumbnail  
Discovery Heat Detector
The Discovery Heat Detector uses a single thermistor to sense the air temperature around the detector. Ideal in environments that are dirty or smoky under normal conditions Well suited for ware...
Open in a new window
 
Document Thumbnail  
Discovery Ionisation Detector
The Discovery Ionisation Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers and causing a current flow. If smoke enters the chamber, th...
Open in a new window
 
Document Thumbnail  
Discovery Multisensor Detector
The Discovery Multisensor Detector comprises optical smoke and thermistor temperature sensors which give both a combined signal as well as a separate heat signal for improved false alarm management...
Open in a new window
 
Document Thumbnail  
Discovery Open-Area Sounder Visual Indicator
The Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol and has been designed for use in indoor and open areas. When the fire system is being commissioned a 'Magne...
Open in a new window
 
Document Thumbnail  
Discovery Open-Area Voice Sounder
The Discovery Open-Area Voice Alarm Devices comprise of a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They...
Open in a new window
 
Document Thumbnail  
Discovery Open-Area Voice Sounder Visual Indicator
The Discovery Open-Area Voice Alarm Devices comprise a sounder and a sounder visual indicator that have been designed to provide clear instructional messages through the Discovery protocol. They ar...
Open in a new window
 
Document Thumbnail  
Discovery Optical Smoke Detector
The Discovery Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely. Responds well to slow-burning smoul...
Open in a new window
 
Document Thumbnail  
Input-Output Unit
The Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input. It can report fau...
Open in a new window
 
Document Thumbnail  
Intelligent Base Mounted Dual IR/UV Flame Detector
The Intelligent Base Mounted UV IR² Flame Detector is designed to protect open indoor areas such as aircraft houses, generator rooms and paint works where open flaming fires may be expected. The de...
Open in a new window
 
Document Thumbnail  
Intelligent Base Mounted Triple IR Flame Detector
The Intelligent Base Mounted IR3 Flame Detector is designed to protect all indoor areas, even in dirty or smoky conditions where open flaming fires may be expected. The detector has three IR sensor...
Open in a new window
 
Document Thumbnail  
Intelligent Base Mounted UV Flame Detector
The Intelligent Base Mounted UV Flame Detector is designed to protect enclosed indoor areas where open fires may be expected. The detector has a fast acting response to flames up to 25m away and is...
Open in a new window
 
Document Thumbnail  
Intelligent Flame Detector
The Intelligent Triple IR Flame Detector (IR3) is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency, flickering infra-red radiation emitted by fla...
Open in a new window
 
Document Thumbnail  
Intelligent Flameproof IR3 Flame Detector
The Intelligent Triple IR Flame Detector (IR3) is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency, flickering infra-red radiation emitted by fla...
Open in a new window
 
Document Thumbnail  
Intelligent Manual Call Point
The Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated by pressing the resettable element. The manual call point signa...
Open in a new window
 
Document Thumbnail  
Intelligent Open-Area Sounder
The Intelligent Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery or XP95 system. Self-test fault monitoring Choice of tones on standard device: Ap...
Open in a new window
 
Document Thumbnail  
Intelligent Open-Area Sounder Visual Indicator
The Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system. Self-test monitoring Choice of tones on standard...
Open in a new window
 
Document Thumbnail  
Intelligent Open-Area Visual Indicator
The Intelligent Open-Area Visual Indicator has been developed for use in situations where there is a risk that sounders will not be heard. For use with XP95 & Discovery systems Self-test fault ...
Open in a new window
 
Document Thumbnail  
Locally Powered Zone Monitor
The Locally Powered Zone Monitor powers and controls the operation of a zone of up to 40 Orbis or Series 65 detectors. It is supplied with a polycarbonate back box for surface mounting.
Open in a new window
 
Document Thumbnail  
Loop-powered Visual Indicator - Amber
The Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is ...
Open in a new window
 
Document Thumbnail  
Loop-powered Visual Indicator - Clear Lens Red Flash
The Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is ...
Open in a new window
 
Document Thumbnail  
Loop-powered Visual Indicator - Red
The Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is ...
Open in a new window
 
Document Thumbnail  
Mains Switching Input-Output Unit
The Mains Switching Input/Output Unit provides a voltage-free, single pole change-over relay output and a monitored switch input. Supervises one or more normally-open switches connected to a sin...
Open in a new window
 
Document Thumbnail  
Mini Switch Monitor
The Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist-click motion) or mounted within an enclosure, ...
Open in a new window
 
Document Thumbnail  
Minidisc Remote Indicator
The MiniDisc Remote Indicator is a light-weight, compact, red LED indicator for use in fire protection systems. Can be used across the entire Apollo range Small and discrete Anti-tamper screw ...
Open in a new window
 
Document Thumbnail  
Multi-Tone Open-Area Sounder
The Multi-Tone Open-Area Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system. Updated to include choice of tones: Apollo, slow whoop and DIN Two volum...
Open in a new window
 
Document Thumbnail  
Multi-Tone Open-Area Sounder Visual Indicator
The Multi-Tone Open-Area Sounder Visual Indicator is designed for use in indoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollo's in...
Open in a new window
 
Document Thumbnail  
Output Unit
The Output Unit provides a voltage free single pole, changeover relay output. It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs. Capable of switching up...
Open in a new window
 
Document Thumbnail  
Soteria® Heat Detector
The SOTERIA® Heat Detector features two heat sensors located laterally to ensure good heat detection in all orientations. Dual heat sensors Utilises digital CoreProtocol® communications Compat...
Open in a new window
 
Document Thumbnail  
Soteria® Heat Detector with Isolator
The SOTERIA® Heat Detector features two heat sensors located laterally to ensure good heat detection in all orientations. Dual heat sensors Utilises digital CoreProtocol® communications Compat...
Open in a new window
 
Document Thumbnail  
Soteria® Multisensor Detector
The SOTERIA® Optical/Heat Multisensor Detector uses new optical sensing technology, PureLight®, to detect smoke particles entering the chamber and is fitted with two thermistors for detecting heat....
Open in a new window
 
Document Thumbnail  
Soteria® Multisensor Detector with Isolator
The SOTERIA® Optical/Heat Multisensor Detector uses new optical sensing technology, PureLight®, to detect smoke particles entering the chamber and is fitted with two thermistors for detecting heat....
Open in a new window
 
Document Thumbnail  
Soteria® Optical Detector
The SOTERIA® Optical Detector uses new optical sensing technology PureLight®, to detect smoke particles entering the chamber. PureLight™ marks a new stage in the development of Apollo optical techn...
Open in a new window
 
Document Thumbnail  
Soteria® Optical Detector with Isolator
The SOTERIA® Optical Detector uses new optical sensing technology PureLight®, to detect smoke particles entering the chamber. PureLight™ marks a new stage in the development of Apollo optical techn...
Open in a new window
 
Document Thumbnail  
Sounder Control Unit
The Sounder Control Unit is used to control the operation of a zone of conventional sounders and report their status to the control panel. Allows sounders to be operated continuously or be pulse...
Open in a new window
 
Document Thumbnail  
Stainless Steel Intelligent IR3 Flame Detector
The Stainless Steel Intelligent IR3 Flame Detector combines high performance with added protection against the effects of salt corrosion making it ideal for most marine applications. The protectio...
Open in a new window
 
Document Thumbnail  
Switch Monitor
The Switch Monitor is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue contro...
Open in a new window
 
Document Thumbnail  
Switch Monitor Plus
The Switch Monitor Plus is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue c...
Open in a new window
 
Document Thumbnail  
Three Channel Input-Output Unit
The Three Channel Input/Output Unit provides three voltage-free, single pole, changeover relay outputs and three monitored switch inputs. Supervises one or more normally open switches on each of...
Open in a new window
 
Document Thumbnail  
Visual Indicator Enclosure
The Visual Indicator Enclosure is weatherproof and allows Apollo's loop-powered visual indicator to be used in high moisture environments such as swimming pools and food processing areas where wash...
Open in a new window
 
Document Thumbnail  
Water Proof Multi-Tone Open-Area Sounder
The Weatherproof Multi-Tone Open-Area Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system. Updated to include choice of tones: Apollo, slow whoop and D...
Open in a new window
 
Document Thumbnail  
Waterproof Multi-Tone Open-Area Sounder Visual Indicator
The Weatherproof Multi-Tone Open-Area Sounder Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complemen...
Open in a new window
 
Document Thumbnail  
XP95 Heat Detector A2S
The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors, stan...
Open in a new window
 
Document Thumbnail  
XP95 Heat Detector CS
The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors, stan...
Open in a new window
 
Document Thumbnail  
XP95 Ionisation Smoke Detector
The XP95 Ionisation Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers causing a current flow. If smoke enters the chamber, the current...
Open in a new window
 
Document Thumbnail  
XP95 Multisensor Detector
The XP95 multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. Sensitive to a wide range of fires...
Open in a new window
 
Document Thumbnail  
XP95 Optical Smoke Detector
The XP95 Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely. Responds well to slow-burning, smoulderi...
Open in a new window
 
Document Thumbnail  
Zone Monitor
The Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Discovery or XP95 loop.
Open in a new window