Home > Companies > Ayrshire Metals Ltd
NBS National BIM Library
The BIM objects listed below are from the NBS National BIM Library, the industry source for generic and proprietary BIM content. The files are created in platform-neutral IFC format as well as the industry's leading 3D CAD format Autodesk Revit.

All NBS National BIM Library objects use the standard property set definitions specified by NBS to create a standard for BIM objects across the construction industry.
Document Thumbnail  
CEE Beam
Channel section, typical uses include door support, floor members, struts and for framing around heating and ventilation equipment. Available depths: 90, 105, 140, 160 mm.
Open in a new window
 
Document Thumbnail  
Cleader Angle
Cleader angle is typically fixed to the bottom purlin flange to provide a flat sheeting face support at gable ends.
Open in a new window
 
Document Thumbnail  
CR Beam
Channel track runner for metal stud panels generally used as the base or top runner and at opening Cills and Lintels.
Open in a new window
 
Document Thumbnail  
CR Column
Channel track vertical runner for metal stud panels at opening Jambs.
Open in a new window
 
Document Thumbnail  
CS Beam with service holes
Metal stud with 38x100 mm service slots at 610 mm centres (except CS70 where slots are 25 x 50 mm at 610 mm centres). CS Beams are typically used as floor joists. CS Beams are also used in conjunc...
Open in a new window
 
Document Thumbnail  
CS Beam without service holes
Metal stud without service slots. CS Beams are typically used as floor joists. CS Beams are also used in conjunction with CR and UR sections to form composite framing at stud wall openings. Availa...
Open in a new window
 
Document Thumbnail  
CS Column with service holes
Metal stud with 38 x 100 mm service slots at 610 mm centres (except CS70 where slots are 25 x 50 mm at 610 mm centres). CS sections are typically used as wall studs. CS Studs are also used in conju...
Open in a new window
 
Document Thumbnail  
CS Column without service holes
Metal stud without service slots. CS Studs are typically used as wall studs. CS Beams are also used in conjunction with CR and UR sections to form composite framing at stud wall openings. Availabl...
Open in a new window
 
Document Thumbnail  
CW Beam
Steel channel cladding support rails. CW beams use the same cleat and hole arrangement as Ayrshire Zed sections and are used to frame around openings. Holes can be countersunk to provide a flush fi...
Open in a new window
 
Document Thumbnail  
CW Column
Steel channel cladding vertical rails. CW sections use the same cleat and hole arrangement as Ayrshire Zed sections and are used to frame around openings. Horizontal cladding support can be support...
Open in a new window
 
Document Thumbnail  
Deflection Head Brackets
Deflection Head Bracket to suit Ayrshire CS studs.
Open in a new window
 
Document Thumbnail  
DP Beam
Structural door beam header generally used above roller shutter doors and at loading bays.
Open in a new window
 
Document Thumbnail  
DP Column
Structural door post often used for industrial doors and at loading bays.
Open in a new window
 
Document Thumbnail  
Eaves Beam
Combines the fuctions of purlin, cladding rail and gutter support when used at the eaves position.
Open in a new window
 
Document Thumbnail  
EP Beam
Combines the fuctions of purlin, cladding rail and gutter support when used at the eaves position. The top flange angle can be specified to slope upwards in 1 degree increments to a maximum of 30 d...
Open in a new window
 
Document Thumbnail  
PJR Beam
Panel Joint Rails are typically used at cladding panel edges in horizontal cladding conditions, capping details and at corners.
Open in a new window
 
Document Thumbnail  
PJR Column
Panel Joint Rails are typically used at cladding panel edges in horizontal cladding conditions, capping details and at corners.
Open in a new window
 
Document Thumbnail  
Swagebeam Beam
Mezzanine floor and platform storage beams that can be connected to Swagebeam or hot-rolled primary framing. Other applications include High division walls, heavy duty stud walls, Blast walls, Fir...
Open in a new window
 
Document Thumbnail  
Swagebeam Column
Mezzanine floor and platform storage columns that can be connected to Swagebeam or hot-rolled primary framing. Other applications include High division walls, heavy duty stud walls, Blast walls, F...
Open in a new window
 
Document Thumbnail  
Top Hat Beam
Top Hat profiles are often used for high bay warehouse construction to support horizontal cladding. Top hat is often fixed to the outer flanges of cladding rails. THPJ sections are used at panel ...
Open in a new window
 
Document Thumbnail  
Top Hat Column
Top Hat profiles are often used for high bay warehouse construction to support horizontal cladding. Top hat is often fixed to the outer flanges of cladding rails. THPJ sections are used at panel ...
Open in a new window
 
Document Thumbnail  
TPN Beam
Galvanised steel profile with one flange sloped downwards. TPN can be fixed direct to Hot-Rolled column flanges without the need for cleats.
Open in a new window
 
Document Thumbnail  
TPP Beam
Galvanised steel profile with two flanges sloped downwards. TPP can be fixed direct to Hot-Rolled column flanges without the need for cleats.
Open in a new window
 
Document Thumbnail  
UR / URS Beam
UR and URS Heavy duty channel track runner for metal stud panels. UR can be used as the base or top runner and at opening Cills and Lintels. URS is head track with vertical slots to enable deflection.
Open in a new window
 
Document Thumbnail  
UR Column
Heavy duty channel track runner for metal stud panels where it can be used as the base or top runner and at opening jambs.
Open in a new window
 
Document Thumbnail  
V profile Cross Bracing
Flat strap diagonal bracing is used at frame corners and adjacent to openings of load bearing stud panels.
Open in a new window
 
Document Thumbnail  
V profile Lateral Bracing
Flat strap lateral bracing is used on both sides of rapid dry envelope panels to support blocking and brace the panel.
Open in a new window
 
Document Thumbnail  
Verge Trim Angle
Verge trim angle fixes to Purlin top flange or at flat roof edges.
Open in a new window
 
Document Thumbnail  
Zed Beam
Zed profile purlin for simple construction details. Can be used as a Purlin for small spans and at steeper roof pitches. Zed sections are fully compatible with CW sections for framing around openi...
Open in a new window
 
Document Thumbnail  
Zed Column
Zed profile purlin for simple construction details. Column profiles can be used as vertical struts for horizontal cladding systems. Zed sections are fully compatible with CW sections for framing a...
Open in a new window
 
Document Thumbnail  
Zeta 2 Beam
Zeta 2 profile provides maximum structural efficiency when used as Purlins or Rails. Available depths: 225, 245, 265, 285 mm.
Open in a new window
 
Document Thumbnail  
Zeta 2 Column
Zeta 2 columns can be used as vertical struts for horizontal cladding systems. Available depths: 225, 245, 265, 285 mm.
Open in a new window
 
Document Thumbnail  
Zeta Beam
Zeta profiles provide maximum structural efficiency when used as Purlins or Rails. Available depths: 125, 150, 175, 200 mm.
Open in a new window
 
Document Thumbnail  
Zeta Column
Zeta profiles provide maximum structural efficiency when used as Purlins or Rails. Available depths: 125, 150, 175, 200 mm.
Open in a new window