Home > Companies > Polyfoam XPS Ltd
Polyfoam XPS Ltd is a leading manufacturer of closed cell, extruded polystyrene insulation. The Polyfoam range is lightweight, strong, moisture resistant and easy to cut and shape, providing thermal performance and strength for the lifetime of the building.

Manufactured in the UK using a blowing agent with low global warming potential (GWP) and zero ozone depletion potential (ODP), Polyfoam XPS products are free from CFCs and HCFCs.

They have Environmental Product Declarations (EPDs) and raw material procurement is certified to BES 6001 (Responsible Sourcing of Construction Products).

The Polyfoam XPS factory in Hartlepool has been assessed as operating under an ISO 9001:2015 Quality Management System, an ISO 14001:2015 Environmental Management System, an ISO 50001 Energy Management System, and an ISO 45001 Occupational Health & Safety Management System.

Polyfoam flooring and roofing systems benefit from a BBA Agrément certification.

Company Image

Featured Downloads

Document Thumbnail
Third party approval
Polyfoam XPS' raw material procurement is certified to BES 6001 (Responsible Sourcing of Cons...
 
Document Thumbnail
Third party approval
Polyfoam Floorboard Standard and Extra BBA certificate
 
Document Thumbnail
Technical data sheet
Polyfoam Floorboard is a rigid, lightweight extruded polystyrene (XPS) insulation. Available in S...
Document Thumbnail
Polyfoam Floorboard Extra
Polyfoam Floorboard Extra is a rigid, high performance, extruded polystyrene board used for the thermal insulation of commercial, industrial and cold storage floors and any building with high floor loadings.
- E20 Formwork for in situ concrete, K11 Rigid sheet flooring/ sheathing/ decking/ sarking/ linings/ casings, M10 Cement based levelling/ wearing screeds
Document Thumbnail
Polyfoam Floorboard Standard
Polyfoam Floorboard Standard is a high performance, extruded polystyrene board used for the thermal insulation of domestic type buildings.
- E20 Formwork for in situ concrete, K11 Rigid sheet flooring/ sheathing/ decking/ sarking/ linings/ casings, M10 Cement based levelling/ wearing screeds
Document Thumbnail
Polyfoam Inverted Roof System
Insulation system for inverted, green and blue roofs.
- J21 Mastic asphalt roofing/ insulation/ finishes, J31 Liquid applied waterproof roof coatings, J41 Reinforced bitumen membrane roof coverings, J42 Single layer polymeric sheet roof coverings

Image gallery

  
Passivhaus Floorboard Installation
Polyfoam Floorboard- Ground floor - above slab
Polyfoam Floorboard- Ground floor - below DPC
Polyfoam Floorboard- Ground floor - below slab
Polyfoam Floorboard- Ground floor - suspended
Polyfoam Floorboard in a basement wall application
 

Quality Assurance

Polyfoam XPS Ltd is certified to the following Quality Assurance schemes/standards:
 
BS EN ISO 9001: 2015 – BSI
 
BS EN ISO 14001: 2015 – BSI
 
ISO 50001
 
BS OHSAS 18001: 2007 – BSI
 
BBA Certificate 17/5454_1 – 17/5454_1 POLYFOAM FLOORBOARD STANDARD AND EXTRA
 
BBA Certificate 17/5454_2 – 17/5454_2 POLYFOAM INVERTED ROOF SYSTEM
 
BRE Certificate: BES 6001 – Framework Standard for Responsible Sourcing
 
BRE Certificate: BES 6001: Issue 3.1 – Certificate of Approval RS0043
 
BRE Certificate: Environmental Product Declaration – Polyfoam Extra XPS

Contact details

Hunter House Industrial Estate,
Hartlepool, TS25 2BE
Tel +44 (0)142 9855100
Fax

Alternative contacts

Customer Services
Hunter House Industrial Estate,
Hartlepool,
Teesside, TS25 2BE
Tel +44 1429 855100
Technical Department
Tel +44(0)1429 855120