Home > Browse > E In situ concrete/Large precast concrete > E20 Formwork for in situ concrete

Formwork for in situ concrete (E20)

Results per page
1-25 of 88
1.1.1 Floor Insulation (load bearing) beneath Structural Slab
Insulation beneath floor slab for high compressive loads without deflection.
FOAMGLAS® Logo
1.1.2 Floor Insulation (load bearing) with Waterproofing Membrane beneath Structural Slab
Insulating and waterproofing membrane beneath floor slab for high compressive loads without deflection.
FOAMGLAS® Logo
1.2.1 Wall External - Insulation To Below Ground Concrete
External insulation to below ground concrete wall.
FOAMGLAS® Logo
1.2.3 Wall External - Insulation with Waterproofing Membrane to Below Ground Concrete
External insulation with waterproofing membrane to below ground concrete wall.
FOAMGLAS® Logo
2.3.2 Wall - Cavity Insulation - Concrete/ Concrete
Cavity wall insulation with high performance vapour barrier.
FOAMGLAS® Logo
3.1.2 Floor Internal - Concrete with Insulation and Screed
Interior floor insulation for high compressive loads without deflection.
FOAMGLAS® Logo
3.1.3 Floor Internal - Concrete with Levelling Mix, Insulation and Screed
Interior floor insulation for high compressive loads without deflection.
FOAMGLAS® Logo
3.1.4 Floor Internal - Concrete with Insulation and Floating Floor
Interior floor insulation for high compressive loads without deflection.
FOAMGLAS® Logo
3.1.8 Floor Internal - Concrete - Foamglas Insulation To Suit Raised Access Floor
Interior floor insulation for high compressive loads without deflection, no thermal bridging to raised access floor supports.
FOAMGLAS® Logo
3.2.3 Wall Internal - With Foamglas Insulation And Plaster Finish
Waterproof and vapour proof insulation for wet room interior walls prepared for finishing plaster.
FOAMGLAS® Logo
3.2.6 Internal Wall Insulation for Wet Room with Tiles
Waterproof and vapour proof insulation for wet room interior walls prepared for tiled finish.
FOAMGLAS® Logo
3.2.7 Wall Internal - Insulation with Plasterboard Finish
Interior wall insulation with a full covering of plasterboards, studwork not required.
FOAMGLAS® Logo
3.2.9 Wall Internal - Insulation with Studwork and Plasterboard
Interior wall with continuous insulation, studwork surface fixed, no thermal bridging.
FOAMGLAS® Logo
Cellcore HG
A range of collapsible products designed to protect foundations from the effect of ground heave.
Cordek Ltd Logo
Cellcore HX B
A range of collapsible products designed to protect foundations from the effect of ground heave.
Cordek Ltd Logo
Cellcore HX Plus
A range of collapsible products designed to protect foundations from the effect of ground heave, incorporating a layer of EPS insulation.
Cordek Ltd Logo
Cellcore HX S
A range of collapsible products designed to protect foundations from the effect of ground heave.
Cordek Ltd Logo
Cellform HX
Permanent formwork system to protect concrete ground beams from the effect of ground heave.
Cordek Ltd Logo
Cellvent HX
A range of collapsible products designed to protect foundations from the effect of ground heave incorporating a passive, sub-floor venting medium.
Cordek Ltd Logo
Clayfill Compressible Fill
Low density expanded polystyrene board.
MAX FRANK Ltd Logo
Earthwool® OmnifFit Slab 400 mm
Multi-purpose, non-combustible, glass mineral wool slab.
Knauf Insulation Ltd Logo
Earthwool® OmnifFit Slab 600 mm
Multi-purpose, non-combustible, glass mineral wool slab.
Knauf Insulation Ltd Logo
Efyos XPS 500
Extruded polystyrene (XPS) thermal insulation board.
Soprema UK Logo
Efyos XPS 700
Extruded polystyrene (XPS) thermal insulation board.
Soprema UK Logo
Efyos XPS SL
Extruded polystyrene (XPS) thermal insulation board.
Soprema UK Logo
Page 1 of 4
...