Home > Browse > E In situ concrete/Large precast concrete

In situ concrete/Large precast concrete (E)

Results per page
1-25 of 348
1.1.1 Floor Insulation (load bearing) beneath Structural Slab
Insulation beneath floor slab for high compressive loads without deflection.
FOAMGLAS® Logo
1.1.2 Floor Insulation (load bearing) with Waterproofing Membrane beneath Structural Slab
Insulating and waterproofing membrane beneath floor slab for high compressive loads without deflection.
FOAMGLAS® Logo
1.2.1 Wall External - Insulation To Below Ground Concrete
External insulation to below ground concrete wall.
FOAMGLAS® Logo
1.2.3 Wall External - Insulation with Waterproofing Membrane to Below Ground Concrete
External insulation with waterproofing membrane to below ground concrete wall.
FOAMGLAS® Logo
2.3.2 Wall - Cavity Insulation - Concrete/ Concrete
Cavity wall insulation with high performance vapour barrier.
FOAMGLAS® Logo
3.1.2 Floor Internal - Concrete with Insulation and Screed
Interior floor insulation for high compressive loads without deflection.
FOAMGLAS® Logo
3.1.3 Floor Internal - Concrete with Levelling Mix, Insulation and Screed
Interior floor insulation for high compressive loads without deflection.
FOAMGLAS® Logo
3.1.4 Floor Internal - Concrete with Insulation and Floating Floor
Interior floor insulation for high compressive loads without deflection.
FOAMGLAS® Logo
3.1.8 Floor Internal - Concrete - Foamglas Insulation To Suit Raised Access Floor
Interior floor insulation for high compressive loads without deflection, no thermal bridging to raised access floor supports.
FOAMGLAS® Logo
3.2.3 Wall Internal - With Foamglas Insulation And Plaster Finish
Waterproof and vapour proof insulation for wet room interior walls prepared for finishing plaster.
FOAMGLAS® Logo
3.2.6 Internal Wall Insulation for Wet Room with Tiles
Waterproof and vapour proof insulation for wet room interior walls prepared for tiled finish.
FOAMGLAS® Logo
3.2.7 Wall Internal - Insulation with Plasterboard Finish
Interior wall insulation with a full covering of plasterboards, studwork not required.
FOAMGLAS® Logo
3.2.9 Wall Internal - Insulation with Studwork and Plasterboard
Interior wall with continuous insulation, studwork surface fixed, no thermal bridging.
FOAMGLAS® Logo
ACE Fabreeka® Bearing Pad (Anti-vibration)
Anti-vibration and medium stress bearing pad.
ACE Fabreeka UK Logo
ACE Fabreeka® Foundation Isolation (Elastomeric)
Elastomeric pads for foundation isolation.
ACE Fabreeka UK Logo
ACE Fabreeka® Foundation Isolation (Pneumatic)
Pneumatic isolators for foundation isolation.
ACE Fabreeka UK Logo
ACE Fabreeka® Pad Thermal Break (Medium Stress)
Thermal break bearing pad, medium stress.
ACE Fabreeka UK Logo
ACE Fabreeka® Sliding PTFE Bearing Pad
Sliding bearing pad with a Polytetrafluoroethylene (PTFE) surface.
ACE Fabreeka UK Logo
ACE Fabreeka-TIM® Structural Thermal Break Plate
Structural, thermal break plates for joints in steel construction.
ACE Fabreeka UK Logo
Adcor® 500S
Hydro-expansive waterstop.
GCP Applied Technologies Logo
Adcor® 510S
Hydro-expansive waterstop.
GCP Applied Technologies Logo
Adcor® 550MI
Hydrophilic waterstop.
GCP Applied Technologies Logo
Adcor® SAS 500S
Hydro-expansive waterstop.
GCP Applied Technologies Logo
Page 1 of 14
...