A-Z
Showing 1-24 of 24
BS EN ISO 14001:2015 Insulation Products
Recticel Insulation
BS EN ISO 9001:2015 Insulation
Recticel Insulation
Certificate BBA 02/3905 Eurothane GP Pitched Roof
Recticel Insulation
Certificate BBA 02/3905 Eurothane GP Timber Frame Board
Recticel Insulation
Certificate BBA 02/3905 Eurothane GP Underfloor
Recticel Insulation
Certificate BBA 02/3908 Eurowall +
Recticel Insulation
Certificate BBA 02/3908 Recticel Eurowall Cavity
Recticel Insulation
Certificate BBA 13/5045 Powerdeck F (UK)
Recticel Insulation
Certificate BBA 14/5136 Eurothane PL Dry Lining System
Recticel Insulation
Certificate BBA 95/3113 Eurothane Eurodeck
Recticel Insulation
Eurothane Eurodeck flat roof insulation technical datasheet
Recticel Insulation
Eurothane Eurodeck is a high performance rigid polyisocyanurate (PIR) foam insulation board for use under mechanically fixed single ply membranes, in new build and refurbishment projects.
The product offers a low thermal conductivity of 0.022 W/mK and a high compressive strength exceeding 150 kPa. It is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13165, Eurothane Eurodeck is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Eurothane GP floor, pitched roof and framed wall insulation technical datasheet
Recticel Insulation
Eurothane GP is a high performance rigid polyisocyanurate (PIR) foam insulation board for use in ground floors (slab and screed, suspended block and beam, and suspended timber) with underfloor heating, pitched roofs and timber framed walls, in new build and refurbishment projects.
The product offers a low thermal conductivity of 0.022 W/mK and a high compressive strength exceeding 140 kPa. It is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13165, Eurothane GP is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Eurothane PL insulated plasterboard for internal linings technical datasheet
Recticel Insulation
Eurothane PL is a high performance rigid polyisocyanurate (PIR) foam insulation board with a 12.5mm tapered edge plasterboard bonded to one side for use as an internal lining to walls and ceilings, in new build and refurbishment projects.
The product offers a low thermal conductivity of 0.022 W/mK (insulation component) and can be mechanically fixed or secured with adhesive to appropriate substrates. It is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13950, Eurothane PL is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Eurowall + full fill cavity wall insulation technical datasheet
Recticel Insulation
Eurowall + is a high performance rigid polyisocyanurate (PIR) foam insulation board for use in full fill masonry cavity wall applications, in new build and extension projects.
It features tongue and groove joints on all four edges, ensuring that boards lock together to minimise thermal bridging and protect against driven rain. It can help to achieve a 0.18 W/m2K U-value in a traditional 100mm cavity.
The product offers a low thermal conductivity of 0.022 W/mK, is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13165, Eurowall + is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Eurowall Cavity technical datasheet
Recticel Insulation
Eurowall Cavity is a high performance rigid polyisocyanurate (PIR) foam insulation board for use in partially filled masonry cavity walls up to 25m high, in new build and extension projects.
The product offers a low thermal conductivity of 0.022 W/mK, is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13165, Eurowall Cavity is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
IP PIR 022 concrete panel system insulation technical datasheet
Recticel Insulation
IP PIR 022 is a high performance rigid polyisocyanurate (PIR) foam insulation board with alkali resistant facings for use in composite concrete panel wall systems.
The product offers a low thermal conductivity of 0.022 W/mK and a high compressive strength exceeding 120 kPa. It is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13165, Eurothane PC is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Plylok flat roof insulation technical datasheet
Recticel Insulation
Plylok is a high performance rigid polyisocyanurate (PIR) foam insulation board with a 6mm plywood laminate for use under traditional bituminous waterproofing and single ply membrane systems, in domestic new build and refurbishment projects.
The product offers a low thermal conductivity of 0.022 W/mK (insulation component), a high compressive strength exceeding 150 kPa, and is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP).
Plylok is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Powerdeck F flat roof insulation technical datasheet
Recticel Insulation
Powerdeck F is a high performance rigid polyisocyanurate (PIR) foam insulation board with glass fleece tissue facings for use under adhered single ply membrane systems, traditional built-up felt and mastic asphalt waterproofing, in new build and refurbishment projects.
The product offers a low thermal conductivity of 0.024 W/mK (thickness dependent) and a high compressive strength exceeding 150 kPa. It is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13165, Powerdeck F is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Powerdeck U flat roof insulation technical datasheet
Recticel Insulation
Powerdeck U is a high performance rigid polyisocyanurate (PIR) foam insulation board with bitumen fleece facings for use under torch-on felt waterproofing systems, in new build and refurbishment projects.
The product offers a low thermal conductivity of 0.024 W/mK (thickness dependent) and a high compressive strength exceeding 150 kPa. It is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13165, Powerdeck U is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Recticel Insulation Cavity Wall Specification Guide V1.5
Recticel Insulation
This specification guide details Recticel Insulation's high performance rigid polyisocyanurate (PIR) foam boards for use in partial fill and full fill masonry cavity wall applications.
Eurowall + (full fill) and Eurowall Cavity (partial fill) both:
- offer a low thermal conductivity of 0.022 W/mK
- are manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP)
- benefit from a Green Guide rating of A
- are CE marked in accordance with EN 13165
- are manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Also included are guideline U-value tables, detailed installation instructions, and further information about product approvals.
Recticel Insulation Flat Roof Specification Guide V1.5
Recticel Insulation
This specification guide details Recticel Insulation's high performance rigid polyisocyanurate (PIR) foam boards for use in warm flat roof constructions.
Eurothane Eurodeck, Powerdeck F and Powerdeck U all:
- offer a low thermal conductivity
- are manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP)
- benefit from a Green Guide rating of A
- are CE marked in accordance with EN 13165
- are manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Plylok has 6mm ply bonded to the insulation and is suited to domestic roof projects.
Also included are guideline U-value tables, detailed installation instructions, and further information about product approvals.
Recticel Insulation Floor Specification Guide V1.5
Recticel Insulation
This specification guide details Recticel Insulation's high performance rigid polyisocyanurate (PIR) foam boards for use in ground floor and soffit lining applications.
Eurothane GP (ground floors) and Eurothane FP (soffit lining) both:
- offer a low thermal conductivity of 0.022 W/mK
- are manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP)
- benefit from a Green Guide rating of A
- are CE marked in accordance with EN 13165
- are manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Also included are guideline U-value tables, detailed installation instructions, and further information about product approvals.
Recticel Insulation Pitched Roof Specification Guide V1.5
Recticel Insulation
This specification guide details Recticel Insulation's high performance rigid polyisocyanurate (PIR) foam boards for use in pitched roof applications, for new build, extension and refurbishment projects.
Eurothane GP (rafter insulation) and Eurothane PL (plasterboard laminate ceiling lining) both:
- offer a low thermal conductivity of 0.022 W/mK
- are manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP)
- benefit from a Green Guide rating of A
- are CE marked
- are manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Also included are guideline U-value tables, detailed installation instructions, and further information about product approvals.
Recticel Insulation Product Guide
Recticel Insulation
An overview of Recticel Insulation's range of high performance rigid polyisocyanurate (PIR) foam boards with low thermal conductivity, providing whole building solutions for various applications in new build, extensions and refurbishment projects. Includes: Eurothane GP (ground floor, framed wall, pitched roof); Eurowall Cavity (partial fill masonry cavity walls); Eurowall + (full fill masonry cavity walls); Eurothane PL (plasterboard laminate internal wall and ceiling lining); Eurothane FP (Class 0 rated for rainscreen cladding systems up to 18m and soffit linings); IP PIR 022 (composite concrete panels); Eurothane Eurodeck, Powerdeck F and Powerdeck U (all warm flat roofs under various waterproofing types); and Plylok (domestic flat roofs) and Deck-VQ (VIP Panels).
Showing 1-24 of 24