"space heating"

A 35 sq.m end-terrace house in Gloucester is a showcase for greener heating. Preparing for a new tenant, landlord and heating specialist Craig Vernon replaced the 1990s all-electric space heating and hot water systems with a modern, greener solution.

A chapel in North Yorkshire has been renovated and converted into a home where two Aerona³ R32 air source heat pumps have been installed to provide the heating and hot water. With the space outside of the property limited, Grant’s compact and slim heat pumps were the perfect solution.

Zoo Animal Enclosure Heating SolutionIn partnership with HEVAC Services Ltd of Kings Langley, Powrmatic was approached to develop a heating solution for the White Rhino’s House at Whipsnade Zoo, which saw the installation of an overhead gas-fired (LPG) continuous radiant heating system, as the previous electric heating system inside their indoor habitat was not efficient enough and heat was escaping through the timber structureProject BackgroundThe White Rhino house at Whipsnade Zoo is the home to a herd (also known as a “crash”) of seven southern white rhinos, Sizzle being the only male – the six females are; Mikumi, Bertha, Tuli, Jaseera, Fahari, and Nandi. Sizzle and Tuli are the parents of the latest baby rhino Nandi born in August 2021.The heating inside their indoor habitat at Whipsnade was not efficient enough. Localised electric heaters were spread around the large space to create coverage, but the heat was escaping through the timber structure. It was decided to upgrade the structure by foam insulation to the internals of the asbestos roof and to provide a new continuous gas-fired overhead radiant heating system providing blanket heat coverage to the complete floor area of the house.  Project SolutionHEVAC Services Ltd of Kings Langley, Hertfordshire, who undertake servicing of HVAC equipment at Whipsnade Zoo on behalf of Pareto FM for the end client ZSL (Zoological Society of London), approached Powrmatic to develop a heating solution for the rhino’s house. The brief was to provide an overhead gas-fired (LPG) radiant heating system to blanket cover the complete floor area of the rhino house, but also design it so that it could be zone controlled, should one of the herd have a need to be in an area of a higher or lower temperature.The LPG propane tanks for the heating system needed to be sunk into the earth at the edge of the rhino house to avoid having to remove any trees, thus maintaining the conservation ethos of ZSL. For a structure such as the rhino house, being the size of a large sports hall, a Powrmatic SRP-PCV+ continuous gas-fired radiant tube system comprising; 4 x 73kW burners was the proposed solution, arranged in 4 temperature zones, with the new MC400/C controller and just the one flue discharge to atmosphere.Project ResultThe installation of the new PCV+ continuous overhead radiant heating system was skilfully undertaken by HEVAC Services Ltd, with the contract programme being driven by the daily habits of the rhino herd! Whether they wanted to be in their house or out on the field. Thus, the logistics of undertaking the heating installation were unique compared to working in a standard commercial/industrial environment.The White Rhinos now have a refurbished home and a heating system that delivers radiant heat in exactly the same way that we (and the rhinos) receive energy in the form of heat from the sun. Radiant heating systems efficiently radiate infrared radiation, which is the transfer of energy in waveform from a hot surface to a relatively cooler surface without heating the medium between. Thus, the rhinos can bask under the radiant heat, whether indoors or outside under the sun.The ZSL Whipsnade Zoo White Rhino Enclosure now benefits from a highly energy-efficient Powrmatic SRP-PCV+ system, listed on the Carbon Trust Energy Technology List (ETL), endorsing the Seasonal Space Heating Energy Efficiency of; 92.1%, and thus delivering low; energy usage, fuel bills and carbon emissions minimising their impact on the environment.

The increased levels of thermal insulation found within the roof voids of a modern house is intended to reduce the amount of heat that is lost from the warm living spaces of the property over time. However breaks in this insulation layer, such as through the loft access door, will severely compromise its effectiveness. This editorial explains how to avoid losing heat in the loft space and therefore losing money.

OverviewIn partnership with Tidyco, Powrmatic was selected to supply an energy-efficient air rotation heating system for a 5,100m2 warehouse storage facility in Derbyshire using a Powrmatic TEx41 Air Rotation Heater measuring over 20ft tall.Project BackgroundTidyco was approached by a customer who is involved with manufacturing, transport and additional services in the aerospace industry amongst others. After recent success, their customer needed to expand their footprint and managed this by moving into a newly built warehouse situated in Derbyshire.SolutionAs this was a brand-new commercial building, there was no heating provision and just the original lighting installed by the builder, which was not fit for purpose. Tidyco was tasked with installing an efficient and effective means of heating solution for the 5,100m2 (55,000 sq ft) vast space along with a modern lighting system. In order to heat and illuminate this space, which occupied a space of more than seven and a half football pitches, some heavy-duty kit was required.ResultFor the heating aspect, Tidyco engineers installed an internal Powrmatic TEx 41 air rotation heater, manufactured in the UK. With an output of 350 kW, the unit measured in at over six metres (20 ft) tall. This particular TEx model was gas-powered and has the superior capacity to provide complete climate control for a 55,000 sq ft with a single TEx Air Rotation Heater.

Four Grant Aerona³ air source heat pumps have been installed at Caerphilly Council Tir Y Berth Depot, providing renewable heating to a number of offices. The installation of Grant heat pumps was part of a wider redevelopment programme which has transformed the space to maximise its potential while also reducing carbon emissions.

Project BackgroundHoe Bridge School is an independent co-educational pre-prep and prep school in Woking, Surrey. The sports hall had been heated by an old radiant system supplied some 35 years ago. The old system was past economical repair so the school decided to invest in a brand new radiant heating system. Contractor, ABS Ltd had over the years maintained the facility, so the school looked to them for advice on replacement equipment. Powrmatic were approached by ABS Ltd and undertook a thorough survey of the sports hall, with a view of replacing the old system with a new Powrmatic SRP – PCV continuous radiant tube system.Project SolutionAlthough the concept of the new heating system is very similar to the old one, there are sound reasons for the like-for-like type replacement. Radiant heating in sports halls is well established as it provides an environment of uniform heat coverage without stuffiness where sports activities can be performed in complete comfort.The new Powrmatic SRP – PCV continuous radiant tube system comprised two radiant branches, each 22m long, down the length of the hall, each branch containing 2 x PCV 23kW burners, all feeding to a vacuum fan to extract the products of combustion. This arrangement virtually mimicked the original layout to reduce the installation time and costs.Project ResultGas fired continuous radiant tube heating is a proven type product being the most appropriate solution for the challenge presented by sports halls, maintaining comfort levels whilst minimising fuel usage and carbon emissions.The SRP-PCV system combusts fuel at the point of use and has the capability of modulating down to 60% of high fire whilst maintaining efficiency but reducing fuel consumption. The Powrmatic SRP-PCV system is designed and manufactured in accordance with BS EN 17175:2019 for Multi-Burner Systems and incorporates a patented burner metering device.The Powrmatic SRP-PCV & PCV+ systems have been validated following review against government approved high performing energy efficiency criteria, with a Seasonal Space Heating Energy Efficiency (SSHEE) of greater than 90%, thus allowing inclusion onto the ETL (Carbon Trust, Energy Technology List). This high efficiency reduces energy usage, operational costs and carbon emissions.

Overview A collaborative project with our long-lasting customers Jet Environmental Systems resulted in the successful installation of three HEM-SLx 525kW heat exchange modules, aimed at providing warehouse heating for a prominent automotive component warehouse in Ellesmere Port. The project involved a bespoke-designed air handling unit (AHU) expertly manufactured by Linton Services Ltd and delivered as a comprehensive turnkey heating solutionBackgroundThe warehouse had a substantial floor area of 39,000m2 and a volume of 760,000m3. The main requirement was to maintain an internal temperature of 16C degrees, even during outdoor temperatures as low as -4C degrees. To ensure efficient heating and uniform distribution throughout the space, a HEM-SL heating solution with a capacity of 525kW and an airflow of 37.5m3/s was needed. The client preferred natural gas as the heating fuel, which Jet Environmental incorporated into their custom-designed air handling unit (AHU) manufactured by Linton Services Ltd in Presteigne.SolutionThe warehouse layout and heating load necessitated the use of three air-handling units. To ensure a reliable and robust heating system, Jet Environmental selected Powrmatic as the heating supplier. Jet Environmental, Linton Services, and Powrmatic have a longstanding relationship and extensive knowledge of each other’s businesses. This familiarity ensures seamless integration of their products and expertise.Each custom-designed HEM unit was manufactured in the UK at Powrmatic’s manufacturing in Ilminster, Somerset. By choosing British-built products, customers can have confidence in the reliability, durability, and adherence to strict industry standards. Each HEMx unit is custom made with a wide range of kW and size configurations and has been adapted to suit the needs of the OEM and AHU industry by the provision of its slot-in casing arrangement.ResultThe collaborative efforts of Jet Environmental Systems, Linton Services, and Powrmatic resulted in the successful implementation of an efficient heating solution for the automotive component warehouse. The customized AHUs, designed by Jet Environmental and manufactured by Linton Services, effectively delivered the required heating capacity to maintain a consistent internal temperature of 16C degrees. Powrmatic’s reliable heating equipment ensured optimal performance and met the client’s expectations.The client was impressed with the comprehensive turnkey solution provided by Jet Environmental Systems. They were particularly satisfied with the partnership between Jet Environmental, Linton Services, and Powrmatic, which demonstrated a deep understanding of their businesses and the ability to deliver a reliable and efficient heating system.Overall, the successful completion of this project showcases the expertise that Powrmatic has in providing effective warehouse heating solutions for industrial applications.

Hatfield Place, a luxury country house wedding venue, chose Junckers solid wood flooring fitted with Leveldek underfloor heating system for its newly developed building. The new foyer, ceremony hall and wedding breakfast room overlook the original walled garden, with views of the beautiful parkland to the rear. The redeveloped building is bright and airy with large feature windows and high ceilings. In the foyer, a spacious room with seating for up to 300 guests, Junckers 22mm Oak Variation flooring provides a warm and lively backdrop, adding character with its subtle colour variations and natural grain patterns. In contrast, the ceremony hall and wedding breakfast room were fitted with Junckers’ Oak Harmony plank flooring, a wide board floorboard which gives a more uniform impression required for the formal spaces. Both floor types were pre-finished in Junckers’ popular Ultramatt lacquer, a strong and durable finish with no surface sheen. Delivered pre-finished, the floors are ready to walk on as soon as they have been installed and will withstand years of dancing and dining with the correct maintenance. The floors in all three rooms were installed over Leveldek, Junckers’ fully integrated underfloor heating and levelling system. Working in partnership with Jupiter Heating Systems, the Leveldek system was developed to simplify the specification process to offer a versatile levelling system, underfloor heating and solid hardwood floor from a single point of supply. Underfloor heating is the most efficient way of heating a large, open area. Specifying Leveldek offered Hatfield Place an all-in-one solution whereas traditionally, installation of the heating system, levelling system and the floor itself would have to be separately sourced. The system is efficient and cost effective to run, ideal for use in a large space. For energy efficiency and fast acting warm-up time, the heating pipes are installed directly beneath the floorboards and the panels are insulated and reinforced for outstanding heat output. The system can be used on an uneven substrate as varying heights can be achieved with the stacking cradles. For more than 30 years, Junckers’ wooden floors have been recognised as the only type of solid hardwood flooring on the market stable enough to be guaranteed for use over underfloor heating. Junckers offers a full guarantee for the system, which is recommended for residential and commercial buildings as well as sports and dance. The flooring contractor was PICA Floorings. 

Heated Lockers were the focus of Helmsman’s most recent project. We travelled up to South Kirby in Pontefract, Yorkshire to work alongside Triton Construction at the brand-new Innovation Hub at Production Park. Production Park is a unique support environment for the live events industry, uniting technology, creative spaces and education. Their newest venture is the brand-new Innovation Hub, with a large research studio with connected offices and teaching spaces. The new innovation hub features specialist equipment designed to support the live events industry as well as a business support programme focusing on assisting SMEs.In an area off the main entrance lobby, Helmsman installed a set of Wet Specification Heated Lockers. With a mix of 1, 2 and 4 compartments, these lockers are designed with a single or twin tube heater at the bottom of the locker, hidden within the locker stand, and perforations throughout to allow warm and/or damp air to circulate and escape the locker. Triton Construction requested a modern, heavy duty laminate finish for these heated lockers. The body of the lockers was manufactured from aluminium and powder coated in colour Ice, whilst we used Biocarbon’s Solid Grade Laminate in colour Elegant Grey for the locker doors, end panels and cladding. This laminate is a great choice as it is carbon neutral as well as being moisture resistant and easy to clean, perfect for a semi-public area such as this project. Our heated lockers can either come with a standard 3 pin power plug or can be available with a spur to wire into a fused switch. Triton construction requested a plug which was positioned on the end panel of the bank of lockers.We paired stainless steel numbers recessed into the doors with Lowe and Fletcher camlocks for a seamless finish to the lockers.  This option of lock is simple and cost effective, whilst also safe and secure.It was great to work with Triton Construction on this project and we look forward to hearing about the success of the Innovation Hub at Production Park in the future. If you have a similar project, or want to know more about our Heated Lockers, contact us today on 01284 530427.

Hands Under Hand Dryers are suitable for a wide range of washrooms spaces, from smaller more intimate washrooms to larger commercial spaces.This superb group of dryers offer an array of market leading technology, while continually maintaining the guaranteed fast and efficient drying times. From ECO functions, to built in HEPA Filters, to adjustable heat controls; our hands in range offers everything you need and more.

OverviewPowrmatic supplied a TEG41 air rotation heater for a large distribution warehouse facility in Bristol which was installed by our trusted partners at RSY Air Conditioning.Project BackgroundSupplying the motor trade for over 50 years, Apec Braking is firmly established as the leading specialist braking supplier to motor factors throughout the UK and Ireland. The 10,488 m² distribution warehouse required frost protection with design parameters of -5°c external and +10°c internal.SolutionJust one TEG41 air rotation heater was installed by our trusted partners RSY Air Conditioning. This TEG41 heater was designed to deliver an impressive 420kW of heat output. The TEG41 heater uses high volume, low velocity, air-circulation to distribute conditioned air to large open space and is the perfect solution for any distribution warehouse heating requirements. Due to the customers requirement to maximise the amount of racking within the warehouse area the distance of the unit from racking was much less than would be usually recommend (it was under 2mtrs from face of heater to face of full height racking).ResultThe newly styled Powrmatic Air rotation units in our new RAL 7015 colour were installed by RSY Air Conditioning. The unit was redesigned at the top of the unit to be top exit rather than the conventional design. The theory behind this was to direct the leaving air towards the roof and use the internal profile of the roof to aid with stratifying the air across the building length. The racked distribution warehouse will now benefit from a frost protection system which will protect the internal sprinkler system from freezing in the colder months.

Royal Winchester HouseComer Homes is renowned for the high quality of its residential and commercial developments, which span London, Hertfordshire, Dorset and throughout the South East. Its latest project is Royal Winchester House, a landmark building of one and two bedroom apartments at the heart of Bracknell's new town centre. As a planning requirement of Bracknell Forest Council, Comer Homes was required to provide a sustainable, low energy form of heating that would offer a reduced carbon footprint, as well as being affordable to run.The SolutionComer Homes specified F730 Exhaust Air Heat Pump systems from NIBE for all 337 apartments on the development to ensure they could meet their renewable targets. The new homes builder employed MKP Consultants Limited to undertake the building services design as they had previous experience of NIBE systems on other apartment developments in the area.The NIBE F730 Exhaust Air Heat Pump system was an ideal solution, as it offers mechanical extract ventilation, alongside heating and hot water in a compact design. The heat pump units were installed in a service cupboard in each apartment, as they have a small footprint of only 0.6m2.NIBE F730 operates by recovering energy from the ventilation air and, if desired, extracted from outdoor air, the heat energy is absorbed by the heat pump using a vapour compression process and subsequently transferred to the water-borne heating system, in this case an underfloor heating system. The integrated 180L domestic hot water cylinder also ensures a plentiful supply for the one- and two-bedroom properties.A sustainable solution, NIBE F730 keeps energy consumption to a minimum. The efficient control system automatically adjusts the indoor climate for maximum comfort for the occupant, using a combination of weather compensated control and the low energy inverter driven compressor.Each apartment is also fitted with a NIBE RMU 40 room controller, to allow greater flexibility of control for users and if required can be easily connected to NIBE’s internet remotely monitoring and control platform UPLINK™.Thanks to this innovative heat pump system, residents at Royal Winchester House are set to benefit from lower energy bills and a reduced carbon footprint.The ResultsThe NIBE F730 system complies with Parts L, F and G of the building regulations, and helps to meet planning requirements designed to reduce energy consumption and carbon footprints within residential housing developments. External noise is kept to a minimum and building aesthetics are unaffected by the need for external plant.TestimonialHead of Projects at Comer Homes, Jack O’Brien explains: “We were looking for a heating and ventilation system that would be both sustainable and affordable to run. We have been impressed with the performance of NIBE’s heat pumps, with their high efficiency, low noise and low running costs further enhancing the sustainability of the whole development.”About Royal Winchester HouseRoyal Winchester House is a landmark building of high specification 1 and 2 bedroom apartments available to rent. The unique design and architecture of Royal Winchester House creates a striking and impressive presence from the ground floor retail spaces up to the luxury penthouse levels.Royal Winchester House has been built for the private rental market and the development is being managed by Chancellors estate agency. The apartments benefit from high standards of insulation and air tightness. In addition to the NIBE heat pumps, the whole development has been fitted with a biodigester for the repurposing of food waste, as part of reducing waste sent to landfill and to add to its sustainability.

South Lanarkshire College (SLC) in Scotland has opened a new, ‘zero-energy’ teaching block on its East Kilbride campus. Specifically designed with first-rate environmental credentials in mind, it boasts a whole host of efficiency-enhancing measures – including highly insulated floors, walls and roofs, triple-glazed windows, low-energy lighting and electrics, rainwater harvesting and solar PV panels on the roof. The college approached NIBE Pro Installer Anderson Floor Warming and Renewables in search of a system that would meet the heating requirements of the eight-classroom block in the most sustainable, cost-effective and reliable way possible.The SolutionSLC already has a range of NIBE products in its on-site renewables training centre, which students use for practical sessions, so a heat pump from NIBE was the natural choice to heat the new block. Mike Anderson, director at Anderson Floor Warming and Renewables, specified, designed and fitted a NIBE F1345 40kW ground source heat pump (GSHP) system to complement the building’s water-based underfloor heating, which operates at similarly low flow temperatures.ResultsNow up and running, the NIBE system is so efficient that it has been awarded a rating of A+++ in line with energy labelling criteria under the ErP Directive. SLC’s new teaching block has become the first building in the UK to achieve a BREEAM sustainability rating of ‘Outstanding’, with the facility excelling in all 10 assessment categories – from energy, waste and water to health and wellbeing.Customer Testimonials“We pride ourselves on our forward-thinking approach to sustainability at SLC, and we couldn’t be happier that our new teaching block has been deemed ‘Outstanding’ by BREEAM assessors. The NIBE heat pump system and the solar PV panels combined generate enough renewable energy to meet the block’s entire heating and power needs, making it a ‘zero-energy’ building. It really is a huge asset to the whole college – not only from a resource point of view, but also as a real-life example of sustainability in action. As well as being a valuable learning space for our construction and energy students, it’s a place for us to bring local businesses and community groups, and showcase the benefits of low-carbon, low-resource buildings first-hand.”Stewart McKillop, principal at South Lanarkshire College

St Wilfrid’s Catholic High School had outgrown its dining room, which eventually could only seat half their pupils at a time. They looked at the options to increase dining space and realised that they couldn’t afford an extension building. That is when they contacted A&S Landscape and realised that an outdoor canopy, with side panels, power, heating and lighting could be a fantastic, cost-effective solution.

With outdated electric storage heating in all 72 flats, Places for People knew that heating system upgrades would reduce bills and improve comfort for residents. TMS Electrical Contractors Ltd, based in Rudgwick, Horsham, was instructed to specify the most suitable replacement – and Dimplex Quantum was the obvious choice.

Teesside-based logistics firm AV Dawson has built a new 130,000m3 warehouse specifically to store £15m-worth steel coils for a nearby international car manufacturer. With the steel at risk of ‘sweating’ and rusting in high humidity levels exceeding 65%, the company was tasked with ensuring a very specific climate for the warehouse (without which the steel would be rendered unusable), while also maintaining low energy costs.The SolutionHoward Tribick, director at local renewable energy specialist and NIBE Pro Installer HT Energy, specified, designed and fitted ten NIBE F1345 ground source heat pumps (GSHPs). Given the site is built on top of an active water table (the River Tees), Howard and the team were able to make the most of the surroundings as a natural energy source. The heat pumps collect heat from 70 bore holes, each 150m deep – a total of 10,500m of active bore hole depth. Each 60kW GSHP is paired with its own ventilating unit and 500L NIBE UKV buffer tank – producing a total output of 600kW. Solar panels on the roof provide an additional 220kW to help meet the warehouse’s electricity needs.ResultsWith the ten GSHPs now fully operational, the results have been even better than expected – with a seasonal performance factor (SPF) of 3.65 and average humidity levels of just 47%. Interconnected with 3km of header pipes, the GSHPs are spaced equidistantly along one side of the 264m-long building. The units are set up as separate systems, so they can work independently of each other or together as required. This provides an added level of security for the customer, ensuring the system can cope at all times and the steel is kept at optimum conditions.Customer Testimonial“This system made perfect commercial sense for us. While the initial outlay was greater than some of the other alternatives, GSHPs provided the most cost-effective solution by far in the long term. In fact, compared to natural gas, we will be making an impressive energy saving of 1.58 million kW/h each year. Our projected payback period is just ten years and we’re also benefiting from Renewable Heat Incentive (RHI) payments for each unit of renewable energy we’re generating.”Gary Dawson, managing director, AV Dawson

IssueWavendon Community Hub has been created and designed to provide local residents with a place to meet and take part in physical and social activities. In keeping with surrounding properties, Wavendon Community Hub is constructed in red/buff brick, with pitched tiled roofs. The building comprises two separate halves: a community side with a vaulted hall space and a separate, large multi-purpose area with changing facilities. The floors needed to perform for different needs and uses, providing robust durability, safety from slips, but still provide welcoming good looks.ApproachThe project was designed by W E Architecture Ltd and the build was completed by Borras Construction Ltd, with flooring installed throughout by HC Coverings Ltd, using Mapei floor preparation products.SolutionResilient flooring was specified throughout the centre and installed over underfloor heating. Designs specified throughout the 500 square metre area included Altro Wood in the communal areas, Altro Aquarius in the toilets, showers and changing rooms and Altro Walkway 20 in corridors and back-of-house areas.

A Wiltshire farmhouse has updated its heating system, replacing its original heat pump with a Grant Aerona³ air source heat pump which has been installed alongside a QR hot water cylinder. The new heat pump and cylinder were integrated alongside an existing solar thermal system, giving the property’s renewable heating system an upgrade.

Our team manufactured and installed 26 two-compartment Laminate Heated Lockers to accommodate 52 people, designed for a wet area, which assures that there will be no risk of peeling or rust.The specification of two-compartment Heated Lockers were 1800mm high, 300mm wide, with 1mm rivets, and 450mm deep. Lockers are positioned on top of a 175mm stand, which allows the heat to enter the lockers through perforation. The Laminate Heated lockers were requested to be in ‘Gris Orage’ by Polyrey, which offers a visually pleasing design that matches the room’s colour scheme.Helmsman Heated lockers are the perfect solution for wet clothes, with laminate doors to fit your aesthetic needs. The lockers are manufactured with a perforated base as well as the shelf allowing the warm air to circulate inside the locker and perforated slots at the top allow the damp air to flow out.Laminate Heated Lockers were finished with Lowe & Fletcher Nimbus in Black. Nimbus is a great lock option since it gives users the peace of mind that their personal possessions are secured and it can be used in both public and private user modes, meaning it may be permanently locked up with a single code or used for day-to-day use.Helmsman Heated Lockers are a fantastic option for many industries. Heated lockers provide commuters and employees who require their damp clothes to dry before the end of the working day.If you have a project where heated lockers are required, or if you want to know more about helmsman products, contact us today at 01284 530496 or get your quote here today.

In the Peak District National Park with views of Cressbrook Dale and the Monsal trail, a thermal bridging solution developed by Owens Corning FOAMGLAS® is helping to deliver high levels of thermal performance for a new, modern home with a minimal space heating demand.The Quarry is a mostly single storey, green-roofed dwelling set on the site of a former shallow stone quarry. Working with John Pardey Architects (JPA), client Will Griffiths secured permission for a modern design faced with traditional materials to ensure a development that sits comfortably within the landscape.

An energy efficient approach to construction, using low maintenance building materials together with Dimplex ground source heat pumps, is proving the key to cost-effective heating at a collection of ten new homes built by Shetland Islands Council in Brae.

Located at Swansea University’s Bay Campus, and designed and constructed by SPECIFIC Innovation and Knowledge Centre, the Active Office and Active Classroom are both designed to be energy positive buildings, capable of generating more solar energy than they consume during a typical annual cycle.The Swansea area of South Wales is synonymous with steelmaking as Tata Steel’s Port Talbot steelworks is just a few miles away from the Bay Campus. For this reason, SPECIFIC wanted to use steel as much as possible on these structures and so a Tata Steel wall and roof cladding system was chosen using Colorcoat Prisma® pre-finished steel, all made in Wales.The Active Classroom also feature Tata Steel’s Colorcoat Renew SC® transpired solar collectors, The system captures heat from the sun and draws it into the building through a microperforated collector on the exterior of the building. Heated fresh air from the cavity is then used as a pre-heater to the main heating system. A transpired solar collector can collect around 50% of the energy falling on its surface, which equates to approximately 500wp/m2 of the collector’s surface area and can deliver around 250KWH/m2per year or up to 50% of space heating requirements.

OverviewPowrmatic was selected to supply a manufacturing facility heating system in a new 60,000sq.ft building in Manchester which was expertly installed by our trusted and long-standing engineers at Swiftheat Gas Services Limited. Four LX60 heaters, one LX90, and eight CECx4500 destratification fans were installed into the facility.Project BackgroundSystem 3 Limited, a leading manufacturer of high-specification insulating glazing sealed units and toughened-laminated glass, was expanding production into new premises. They needed a reliable and efficient heating solution for their newly refurbished premises. Swiftheat was recommended by Powrmatic, a family-run business with a reputation for providing commercial heating solutions and industrial heating installation.SolutionSwiftheat Gas Services Ltd provided a complete installation of the heating system for System 3’s new premises. The installation consisted of 5 ErP-compliant suspended LX60 and LX90 warm air gas heaters and eight CECx destratification fans to assist with air circulation. The building size was 60,000sq.ft, and the entire project required an 88.9mm stainless steel gas line.ResultSwiftheat Gas Services Ltd provided a complete installation of the heating system for System 3’s new premises. The installation consisted of 5 ErP-compliant suspended LX60 and LX90 warm air gas heaters and eight CECx destratification fans to assist with air circulation. The building size was 60,000sq.ft, and the entire project required an 88.9mm stainless steel gas line.

Located within the Kirtley building, close to the cycle storage compound, are changing facilities with a number of showers, hairdryers and mirrors. As part of the upgrade to these facilities, the University has installed Heated Z Lockers. The shape of these lockers was chosen so that the user has the full height of the locker to gently dry their clothes and equipment that they used to cycle to university.This unique shape makes them the perfect design for heated lockers. Simply hang your damp clothes inside and let the Heated Z Locker do the hard work. Air flows easily inside the locker, with a perforated base, and perforated slots at the top allow the damp air to escape. Single and twin tube heaters are available, with the heat source plugging into a 3-pin power socket, or wired into a fused switch.A range of materials and colour finishes are available, and the University of Derby chose Laminate Z Locker doors in two colours. Laminate is a great choice of material as it creates a more Heavy Duty locker less likely to scratch, dent or damage.With a large range of laminate manufacturers, including a carbon-neutral laminate supplier, our Heated Z Lockers can be a bright pop of colour through to a neutral wood affect laminate. The University of Derby chose two contrasting laminate colours in colours Sage and Elegant Grey from BioCarbon Laminates, providing a modern look to the Z Lockers. The lockers were also manufactured with seat stands, with the slats matching Elegant Grey door colour from BioCarbon Laminates.We can also provide a range of accessories, from multiple lock options through to wrist straps, particularly popular with leisure centres and gyms. The project at University of Derby included oval laminated numbering, Lowe & Fletcher coin return locks and grey wrist straps.The university were very pleased with their Heated Z Lockers, and we have since been back to measure up for some more laminate lockers. It was great for our team to work with University of Derby on this project, and we look forward to returning for the next project soon. If you need some Heated Lockers or want to find out some more information about our range of products, call 01284 727626 or contact us here.

We delve into Anna's inspiring rooflight replacement journey in her Hertfordshire home with a Vario by VELUX custom-made roof window. This stunning addition has wholly transformed her living space.At Vario by VELUX, we understand the importance of custom-made solutions to suit your unique needs, and our bespoke flat roof windows are designed to do just that. Anna's story is a testament to how our Vario by VELUX Rooflights can create a space filled with daylight, enhancing ambience and interior design.Custom Made Roof Window CollaborationAnna, who hails from South Africa and relocated to the UK almost 40 years ago, recognises the importance of natural light and how it can significantly impact your well-being. Having lived in her Hertfordshire home for many years, she knew it was time to replace her existing lantern rooflight due to a leak and a desire for a more modern design.When she reached out to her architect for guidance, he recommended Vario by VELUX, a decision that proved to be a game-changer for her home. Our team worked closely with Anna, making the bespoke flat roof window fit around the structural beam and seamlessly integrated with her living space. The result was nothing short of beautiful, highlighting the exceptional craftsmanship, professionalism and flexibility Vario by VELUX is known for.What improvements have you seen between the old rooflight and the new one?“The design of the extension is better now than when we had the previous rooflight. The lantern that stood up always bothered my eye and now this flat roof is unobtrusive. When I look out of my windows upstairs I don't see anything, I just see the garden, it’s just opened up another dimension.Another thing is the rain, the sound is different - it’s softer and I like the pool of water you can see lying on it - the different little patterns. It’s a wonderful sound and view so I really recommend it.”The Impact of Unlimited Daylight on Your HomeWith the Vario Unlimited Rooflight installed, Anna's living space now basks in abundant natural light. This daylight not only brightens up the room but also enhances the overall interior design. Even on cloudy days, the room remains well-illuminated, reducing the need for artificial lighting. The difference is undeniable, and Anna couldn't be happier with the transformation, stating, “I had such a good experience, everything was done so professionally… the end product is beautiful.”Advantages of Flat Roof Windows Over Lantern Roof DesignsWhen considering the choice between a flat roof window, like Vario Roof lights, and a lantern roof design, it's essential to highlight the benefits that make the former stand out:Unobstructed Views: Unlike traditional lantern-style skylights, flat roof windows can offer a more discreet and clean design that blends seamlessly with the roof. This design allows unrestricted views of surroundings, creating a more open and expansive feeling within a space. Lanterns can provide a beautiful and artistic effect by breaking up the daylight with the lantern intersections.Balancing Cost and Style in Skylights: Choosing between flat glass rooflights and lantern skylights isn't just about style but also cost. Flat glass rooflights are a bit friendlier on your wallet and can even help lower your heating bills, thanks to their excellent insulation. But don't let that sway you if your heart is set on a lantern skylight! They might require more time and expertise to install, but the result could be well worth it. Ultimately, the choice is yours - both options bring daylight and elegance.Ventilation: Vario flat rooflights are designed to maximise airflow thanks to our upstand, contributing to a well-ventilated and fresh interior space. Lantern roof lights, on the other hand, excel in aesthetics, adding a distinct charm to any room. However, their ventilation efficiency may not be as high as that of flat roof windows. Both options present a blend of form and functionality to consider.Insulation Differences: Lantern skylights and flat roof windows both provide insulation but to varying degrees. Lanterns with multiple glazing pane joints tend to have poorer insulation, leading to more heat loss. Conversely, flat roof windows, with fewer connections, generally offer superior insulation.There are certainly pros and cons to both types of rooflight design. What matters most is that you are considering adding more daylight into your your designs!Experience the ‘Wow Factor’ With a Bespoke Roof WindowAnna's advice when considering a renovation is crystal clear: "I really don’t think you can do an extension without a rooflight." She believes it's essential for well-being and making your space more enjoyable. A rooflight adds the "wow factor" that can genuinely make your life better.Incorporating a Vario skylight into your project can be a game-changer, just as it was for Anna.

As a part of the development of the company, BT are planning to reduce their number of working locations from over 300 to just 30. BT Bristol features flexible workspaces, the latest IT and smart building technology, restaurants and cafes and a rooftop wildflower meadow terrace with panoramic views of Bristol.An important aspect of the development of this new building was its eco credentials. With the whole company seeking to reduce its carbon emissions, choices were made throughout the design and build process to support this aim. As well as the rooftop meadow, the building features a heating system from the low-carbon district heating network and aspects that encourage employees to make greener choices about their travel to and from work. In order to support this, the BT Bristol office building features parking for around 270 bicycles, as well as changing rooms, showers and lockers.Helmsman were excited to be contacted by Honeyfield Property Services to supply and install the lockers at BT Bristol. The client requested Heated Z Lockers, with hasp locks for the user to attach their own padlock.Heated Lockers are a great addition to a cycle storage area, providing a storage solution that can dry damp clothes as well as keep your items safe during the working day.The Z shape is a particularly good choice for heated lockers, as the user can hang their clothing in the taller area of the locker and let the heated locker do the hard work.Air flows through the locker through a perforated base, and perforations at the top of the locker allow the damp air to escape. The tube heaters are positioned within the stands of the locker and can be either plugged into a 3-pin power socket or wired into a fused switch.In keeping with BT Bristol’s aim for carbon efficiency, the laminate used for the project was Graphite by BioCarbon Laminates. This is one of Helmsman’s standard laminate options, and is a carbon neutral material.In addition to the lockers, we also supplied and installed seat stands, with adjustable feet, and ash hardwood seat slats. The stands, back and sides of the lockers were all cladded with matching Graphite laminate, and the lockers were finished with black circle discs with white numbering.It was great to work with Honeyfield Property Services on this project, and wish the BT Bristol office much success in the future.If you have a similar project, or want to find out more about our Heated Lockers, give us a call on 01284 530427 or fill in our contact form here.

Humberside homeowner James Clark scrapped the gas combi boiler at his three-year-old house in Welton, for indoor warmth and hot water are now provided by a Daikin air source heat pump that is partly powered by batteries and rooftop solar panels

A detached new build house in Pontyberem, Carmarthenshire, has incorporated a Grant Aerona³ air source heat pump and Monowave cylinder to deliver its heating effectively and sustainably.

OverviewPowrmatic was selected to supply a frost protection warehouse heating solution for a massive 81,000m² building at Plot 2 at the Midland Logistic Park installed by Phase Mechanical Projects. a combination of 7 TE61 heating units and TE61 Destratifcation units were installed.Project BackgroundThe 81,000m² industrial logistic warehouse required frost protection with design parameters of -5°c external and +5°c internal.SolutionOne of our largest installations to date, 4 x TEG61 air rotation heaters were installed by our trusted partners Phase Mechanical Projects. Each TEG61 heaters boasts an impressive 525kW of heat output and were installed alongside 3 x TE61 destratification units to assist with the air turnover due to the size of the building. The 4 TEG61 heater units selected were designed to move 39m3/s of air around the building per unit, and when combined with 3 TE61 destratification units also at 39m3/s this gave a total air volume of 270m3/s which achieved the required 0.8 air movements per hour from the end client.ResultThe newly styled Powrmatic Air rotation units in our new RAL 7015 colour were installed expertly by Phase Mechanical Projects. The racked logistic warehouse will now benefit from a frost protection system which will protect the internal sprinkler system from freezing in the colder months. Each T.E manufactured at Powrmatic is custom built to specific project requirements.

OverviewA successful installation of 40 x Powrmatic SRP U Tubes at a hangar facility in Boscombe. With the system design by Powrmatic, ABS, a leading HVAC and installation company, was entrusted with this significant installation project. The installation aimed to provide efficient heating performance, reduce energy costs, and improve the overall comfort and functionality of the hangar.Project BackgroundThe Weighbridge Hangar Building 499 at MOD Boscombe Down operated by QinetiQ required a new heating system due to the life-expired existing system. The hangar required a powerful heating system that would operate efficiently during the cold winter months while reducing energy costs. A new Powrmatic SRP U-tube herringbone radiant heating system was produced in line with the design intent of WYG on their tender documents. J & B Hopkins secured the M & E contract and employed the services of ABS Ltd to undertake the installation of the radiant heating system. ABS Ltd, formed in 1978, offers a full range of professional services including the installation and maintenance of both radiant and warm air heating systems to both commercial and industrial properties throughout the UK.SolutionThe MOD hangar facility, situated on an exposed location, at Boscombe Down required a robust heating solution to withstand the cold winter months. 40 Powrmatic SRP radiant U Tube PVU50 Hi/Low heaters each rated at 50kW on a herringbone system layout with ducted fresh air onto each burner to comply with fire safety standards were installed by ABS Ltd. To maximize efficiency, the heaters mounted at an impressive height of 23 meters in line with Powrmatic’s design drawings were arranged in 8 lines of 5, with 3 heaters connected to one fan and 2 heaters connected to another fan. The heating system incorporated Powrmatic MC200 controllers and black bulb sensors for precise temperature control across the hangar.ResultThe final stage of the installation was completed by J & B Hopkins, arranging for the necessary gas and electrical distribution services to the radiant heaters and discharge fans. The 40 Powrmatic SRP radiant U Tubes installed by ABS Ltd effectively heated the facility, providing a comfortable and conducive environment for the workforce during the winter season. Additionally, the new heating system reduced energy costs and eliminated the need for multiple exhausts on the rooftop hence retaining the aesthetic design principles of the hangar. The commissioning was successfully carried out when all services were completed, providing a satisfied client with a capable heating installation within the hangar, for the exposed site location.

The San Siro playing field was designed to be heated using an under-soil system featuring single-head, in-line electronic pumps. In the wider facility areas, a heating substation was installed, incorporating wet-rotor circulators and in-line electronic pumps for the climate conditioning systems. Additionally, co-generation systems with both single-head and twin-head in-line electronic pumps were implemented for auxiliary plants dedicated to heating energy production.Despite the initial investment in inverter technology for the pumps, the operational optimization results in a lower running cost, showcasing a great example of an energy efficient installation.

Working closely with Dimplex’s in-house heating design team, Ability Projects developed a unique centralised control solution, incorporating Dimplex air source heat pump and solar PV technology.

Powrmatic was selected to supply a large distribution centre with an energy-saving air rotation heating system for ILG's 46,800m³ distribution facility in Gatwick working in partnership with Air Ability who supplied and installed just a single Powrmatic TEx41 air rotation heater.

Project BackgroundThe Harrow Club in London W10 has been creating positive futures for marginalised young people in West London since it was formed in 1883 as The Harrow Mission Church. Through general youth clubs and specialist interventions, they aim to empower young people to complete their education, avoid anti-social behaviour and become positive contributors to society. They work with up to 500 young people each week across 6 clubs, helping them to recognise their full potential.The Harrow Club with high ceilings, period windows, and exposed beams has a large sports hall which is a preserved reminder of the Club’s heritage, plus a smaller dance studio, both of which were heated by an old continuous gas-fired radiant tube system that had ‘life-expired’.Project SolutionBuilding Services Engineering Consultants, SS and A of Great Portland Street were commissioned by the Harrow Club to explore options for the replacement of the old radiant heating system. They called on the expertise of Powrmatic to review possibilities and offer a solution.The installation of the new systems was expertly undertaken by Industrial Commercial Environments Ltd of East Sussex. Radiant heating is the most suitable form of heat for both sports halls and dance studios as the lower air temperature for the same comfort level is approx. 5ºC lower than with a warm air system, thus producing a beneficial environment for the activities. A new Powrmatic SRP-PCV+ continuous gas-fired radiant tube system was the proposed solution. This enabled the installation to follow the route of the existing thus minimising costs and disruption during the works.Project ResultThe new Powrmatic SRP-PCV+ continuous radiant heating systems in the two halls have provided the Harrow Club with energy-efficient heating for the next two to three decades. These systems deliver the comfortable environment crucial for the well-being of the young people that the club nurtures in their quest to improve their futures.The Harrow Club now benefits from the energy-efficient Powrmatic SRP-PCV+ systems, listed on the Carbon Trust Energy Technology List (ETL), reducing their fuel bills, carbon emissions and thus their impact on the environment.

SubFloor raised steel flooring was used to renovate, raise and level a 285 m² listed museum floor into a modern meeting space in Ellesmere Port, Liverpool.This simple and elegant solution raised an uneven stone floor up to 300 mm to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height. Steel joists were used to meet moisture requirements in the port area and underfloor heating plates were assembled on top.Products:Steel Joist 45x30x3800 mmSubFloor Screw 300 mmScrew FootInsulation Bearer 120 mmInsulation Bearer 95 mmHeight Variation: 50 - 303 mmSystem Weight - c/c 400 mm: 2.88 kg/m²Materials:Steel SUB250 GD, Z100 GalvFibre-reinforced VitamidePolyamidePoint Load 50 x 50 mm: 5.78 kN6.78 kN/m² - Between screws10.54 kN/m² - Over screw at joist edge[According to SS-EN 1195:1998]