Home > Companies > Styrene Packaging & Insulation
NBS Plus
The product information below is from the NBS Plus library of product clauses offered in NBS specification products. It has been created by NBS for Styrene Packaging & Insulation. Each product clause is authored in NBS format and is intended for inclusion in project specifications. Please note that NBS product guidance is not a replacement for the manufacturer's literature and it is recommended that Styrene Packaging & Insulation be consulted before specifying.

To find out more about producing specifications for building projects visit www.theNBS.com/solutions
Document Thumbnail
Clayfill Clay Heave Protection
Expanded polystyrene clayfill clay heave protection.
E20 Formwork for in situ concrete
 
Document Thumbnail
EPS Geofill
Expanded polystyrene earth fill material.
E20 Formwork for in situ concrete
 
Document Thumbnail
External Wall Insulation
Expanded polystyrene external wall insulation (EWI).
M21 Insulation with rendered finish
 
Document Thumbnail
External Wall Insulation Railboard
Expanded polystyrene external wall insulation (EWI) Railboards.
M21 Insulation with rendered finish
 
Document Thumbnail
Flat Inverted Roofing Insulation
Expanded polystyrene insulation for inverted flat roofs.
Q37 Green roofs, J42 Single layer polymeric sheet roof coverings, J21 Mastic asphalt roofing/ insulation/ finishes, J41 Reinforced bitumen membrane roof coverings
 
Document Thumbnail
Flooring Insulation
Expanded polystyrene flooring insulation.
K11 Rigid sheet flooring/ sheathing/ decking/ sarking/ linings/ casings, E20 Formwork for in situ concrete, P10 Sundry insulation/ proofing work, M13 Calcium sulfate based levelling screeds, M10 Cement based levelling/ wearing screeds
 
Document Thumbnail
Full Fill Cavity Insulation Board
Expanded polystyrene full fill cavity insulation board.
F30 Accessories/ sundry items for brick/ block/ stone walling
 
Document Thumbnail
Gridboard UFH Insulation
Expanded polystyrene underfloor heating insulation.
K11 Rigid sheet flooring/ sheathing/ decking/ sarking/ linings/ casings, M13 Calcium sulfate based levelling screeds, M10 Cement based levelling/ wearing screeds, T90 Heating systems - domestic
 
Document Thumbnail
Partial Fill Cavity Insulation Board
Expanded polystyrene partial fill cavity insulation board.
F30 Accessories/ sundry items for brick/ block/ stone walling
 
Document Thumbnail
Perlite Bonded Roofing Insulation Board
Expanded polystyrene insulation bonded to a perlite insulation board.
J21 Mastic asphalt roofing/ insulation/ finishes, J41 Reinforced bitumen membrane roof coverings, J42 Single layer polymeric sheet roof coverings, Q37 Green roofs
 
Document Thumbnail
Plustherm Enhanced Grey EPS
Expanded polystyrene flooring insulation.
M13 Calcium sulfate based levelling screeds, K11 Rigid sheet flooring/ sheathing/ decking/ sarking/ linings/ casings, M10 Cement based levelling/ wearing screeds
 
Document Thumbnail
Profiled Roofing Insulation
Expanded polystyrene insulation for profiled roofs.
J42 Single layer polymeric sheet roof coverings, J31 Liquid applied waterproof roof coatings, J41 Reinforced bitumen membrane roof coverings, H43 Metal composite panel cladding/ covering
 
Document Thumbnail
Tapered Roofing Insulation
Expanded polystyrene insulation for tapered roofs.
H43 Metal composite panel cladding/ covering, J41 Reinforced bitumen membrane roof coverings, J31 Liquid applied waterproof roof coatings, J42 Single layer polymeric sheet roof coverings
 
Document Thumbnail
T-Beam Suspended Ground Floor Insulation Infill
Expanded polystyrene T-Beam suspended floor insulation.
E60 Precast concrete floors/ roof decks
 
Document Thumbnail
UFH Panels - Routed
Expanded polystyrene underfloor heating panel insulation.
K11 Rigid sheet flooring/ sheathing/ decking/ sarking/ linings/ casings, M13 Calcium sulfate based levelling screeds, M10 Cement based levelling/ wearing screeds, T90 Heating systems - domestic
 
Document Thumbnail
Wall Bead Cavity Insulation
Expanded polystyrene wall bead cavity insulation.
P11 Foamed/ fibre/ bead cavity wall insulation