Tarmac
Asphalt - Readymix Concrete - Screed - Mortar - Blocks - Cement - Lime - Limelite - Grouts - Highway
A-Z
Showing 1-36 of 89
Asphalt for driveway surfacing and car parks - Ultidrive
Tarmac
Ultidrive is a high performance asphalt with a smooth and highly durable finish that keeps its premium appearance for longer. An advanced modified binder reduces softening in hot weather and enhances the toughness of the surface. The advanced modified binder also gives enhanced resistance to temporary fuel and oil spills compared to conventional
asphalt surfacing.
Car park asphalt resurfacing
Tarmac
ULTIFASTPAVE is an advanced single layer asphalt from Tarmac that allows fast resurfacing of car parks and link roads and provides a durable, long lasting finish.
By replacing the need for a binder and surface course it reduces construction time and long site closures.
Cemscreed 5 Technical Data Sheet
Tarmac
Cemscreed 5 is a rapid drying floor screed developed to fulfil the need for quick drying factory produced high performance screeds suitable for all common floor finishes. Cemscreed 5 is perfect for jobs that need a quick turnaround to allow foot traffic and final floor coverings.
Certificate of Conformity: Responsible Sourcing of Construction Products
Tarmac
Coloured asphalt - Ulticolour
Tarmac
Coloured asphalts that combine a clear polymer modified binder, with a selected pigment and complementary aggregate to produce a range of brighter, longer lasting coloured surfaces.
It can be used for roads, driveways, car parks and is also available as a coloured porous asphalt for improved drainage.
Coloured Mortar Product Guide
Tarmac
Tarmac Building Products is able to supply over 50 shades of mortar to ensure the most pleasing match and to allow the architect and builder unrestricted creativity when it comes to making their building that bit different. Coloured mortar can be used throughout a building or with considerable impact on certain sections. The options, whether subtle or bold, are as endless as your imagination.
Dry Silo Mortar
Tarmac
Dry silo mortar is the ideal solution particularly for multiple dwelling sites where quality, consistency and convenience is essential. At the press of a button the dry pre-blended mortar is mixed with water delivering instant workable mortar with the same consistency over and over again.
Durox Coursing Bricks - Aircrete Blocks Product Guide
Tarmac
Durox is a modern construction material, whose versatility, light weight, thermal and acoustic properties make it the ideal solution for a wide variety of applications in all types of building.
Durox can be used below ground in foundation walls, in suspended beam and block floors and in all types of internal and external walls. It provides many benefits for specifiers and contractors making it the natural choice where blockwork is specified.
Durox Coursing bricks are used to avoid thermal bridging and minimise wastage.
Durox Flooring - Aircrete Blocks Product Guide
Tarmac
Durox is a modern construction material, whose versatility, light weight, thermal and acoustic properties make it the ideal solution for a wide variety of applications in all types of building.
Durox can be used below ground in foundation walls, in suspended beam and block floors and in all types of internal and external walls. It provides many benefits for specifiers and contractors making it the natural choice where blockwork is specified.
Durox Floor blocks are used in ground floors to reduce the U-value and minimise wastage.
Durox Foundation - Aircrete Blocks Product Guide
Tarmac
Durox is a modern construction material, whose versatility, light weight, thermal and acoustic properties make it the ideal solution for a wide variety of applications in all types of building.
Durox can be used below ground in foundation walls, in suspended beam and block floors and in all types of internal and external walls. It provides many benefits for specifiers and contractors making it the natural choice where blockwork is specified.
Durox Foundation Blocks are produced specifically for use below DPC in solid walls.
Durox Supabloc - Aircrete Blocks Product Guide
Tarmac
Durox is a modern construction material, whose versatility, light weight, thermal and acoustic properties make it the ideal solution for a wide variety of applications in all types of building.
Durox can be used below ground in foundation walls, in suspended beam and block floors and in all types of internal and external walls. It provides many benefits for specifiers and contractors making it the natural choice where blockwork is specified.
Durox Supabloc combines low unit weight with high thermal insulation and acoustic performance in strengths of 3.6, 4.2, 7.3 and 8.7N/mm2.
Fuel resisting asphalt
Tarmac
Using an advanced modified binder and high quality aggregate, ULTISHIELD is a super dense SMA from Tarmac, that is designed to withstand the harmful effects of contamination by fuel and oils.
ULTISHIELD offers superior resistance to fuel and oils spills, deformation and turning stresses from heavy vehicles. It is suitable for taxi ranks, service stations, lay-bys, bus stops, car parks and distribution centres.
ULTISHIELD can be laid quickly and trafficked within hours depending on ambient conditions compared to lengthy delays in opening concrete surfaces.
Glow in the dark asphalt - Tarmac Ultiglow
Tarmac
Tarmac Ultiglow is an innovative glow in the dark asphalt system that makes footpaths, cycle paths and pedestrian areas come alive at night.
Glow in the dark concrete - Toptint Glow
Tarmac
Toptint Glow is a decorative concrete surface that not only looks beautiful in the day time, it also glows in the dark or dimly lit areas. Toptint Glow works by absorbing natural and artificial UV radiation during the day and radiating it at night as a visible light.
Heavy duty asphalt - Tarmac Ultiphalt HD
Tarmac
Using proven SMA technology and
an advanced modified binder, ULTIPHALT HD has been specially designed to offer long term durability and performance in challenging locations.
ULTIPHALT HD is proven to deliver lasting performance in the most challenging environments, including lorry parks, ports and distribution centres.
Hemelite Coursing Bricks - Aggregate Blocks Product Guide
Tarmac
"Hemelite is a range of lightweight aggregate blocks available in a variety of formats and suited to a number of loadbearing applications. Hemelite lightweight aggregate blocks are suitable for use in walls above and below ground and in block and beam floors. They have a proven high level of technical performance.
Coursing bricks are designed for use with the range of Hemelite blocks. "
Hemelite Foundation - Aggregate Blocks Product Guide
Tarmac
Hemelite is a range of lightweight aggregate blocks available in a variety of formats and suited to a number of loadbearing applications. Hemelite lightweight aggregate blocks are suitable for use in walls above and below ground and in block and beam floors. They have a proven high level of technical performance.
Hemelite Foundation blocks are produced specifically for use below DPC in solid walls.
Hemelite Paint Quality - Aggregate Blocks Product Guide
Tarmac
Hemelite is a range of lightweight aggregate blocks available in a variety of formats and suited to a number of loadbearing applications. Hemelite lightweight aggregate blocks are suitable for use in walls above and below ground and in block and beam floors. They have a proven high level of technical performance.
Close textured blocks for walls in commercial and leisure buildings which are to receive direct decoration.
Hemelite Standard - Aggregate Blocks Product Guide
Tarmac
Hemelite is a range of lightweight aggregate blocks available in a variety of formats and suited to a number of loadbearing applications. Hemelite lightweight aggregate blocks are suitable for use in walls above and below ground and in block and beam floors. They have a proven high level of technical performance.
For general use in walls above and below ground and in beam and block floors.
Hemelite Ultralite - Aggregate Blocks Product Guide
Tarmac
Hemelite is a range of lightweight aggregate blocks available in a variety of formats and suited to a number of loadbearing applications.
Hemelite Ultralite is an ultra low density aggregate block.
Hydrocure Mortar Product Guide
Tarmac
HYDROCURE has been specifically formulated to enhance the performance of mortar, and lessen the effect of moisture migration when used in conjunction with high suction masonry units. With the qualities of dry silo pre-blended mortar, once mixed, HYDROCURE is an instant, workable mortar with the added benefit of improving water retention to allow >90% retentivity.
Hydrocure Mortar Technical Data Sheet
Tarmac
HYDROCURE has been specifically formulated to enhance the performance of mortar, and lessen the effect of moisture migration when used in conjunction with high suction masonry units. With the qualities of dry silo pre-blended mortar, once mixed, HYDROCURE is an instant, workable mortar with the added benefit of improving water retention to allow >90% retentivity.
Limelite Brick and Stone Protector
Tarmac
Limelite Brick and Stone Protector is a breathable water-repellent protection cream designed to minimise water ingress into brick, stone, block and concrete substrates.
Limelite Brick and Stone Protector is an emulsion facade cream, applied by brush, roller or spray and requires only a single coat to form an effective, water-resistant protective barrier.
The treated surface appears unchanged due to a clear finish
Special Properties
• Safeguards historic structures from deterioration
• Reduces water absorption by up to 95%
• Greatly improves the insulation properties of the wall
• Breathable
• Extremely high penetration
• Prevents mould growth
• Maintains the natural appearance of the wall
• Increases the freeze-thaw resistance of the substrate.
• Single coat application
• Ready to use
Limelite Canal Grout
Tarmac
Limelite Canal Grout is a high yield bentonite based grout designed for use in canal walls, sealing foundations, tunnels, vaults and manholes from water.
ADVANTAGES
One component mix
Factory blended
Low strength
Good pumping characteristics
Sets to a clay putty consistency
Does not migrate
Limelite Easy Bond Plaster Primer
Tarmac
Limelite Easy Bond is a pre-blended, salt resistant slurry plaster primer designed for use with the Limelite Plaster range to aid adhesion and control suction. The use of Limelite Easy Bond will provide a key to smooth substrates and provide resistance to sulphate attack. When applied as part of the Limelite Renovating Plaster System, Limelite Easy Bond is ideal for use in heritage restoration, renovation projects and damp environments.
Can also be used for renders and screeds.
Limelite Finishing Plaster
Tarmac
Limelite High Impact Finishing Plaster is a breathable and durable finishing plaster designed to provide a quality finish over
Limelite backing plasters. The finishing plaster can also be used over lime backgrounds, sand/cement mixes and existing gypsum plaster.
Limelite High Impact Finishing Plaster can be used as part of the Limelite Renovating Plaster System, which can be applied directly to damp walls or as part of flood remediation works.
Limelite Heritage Grout St Pancras
Tarmac
A high strength pre-blended, hydraulic lime based structural grout designed for injection into masonry substrates to stabilise the structure.
Limelite Heritage Grout St. Pancras is breathable and flexible, making it suitable for use in listed and heritage structures. The grout is highly fluid to provide maximum penetration into the substrate and contains no Portland Cement.
Limelite Heritage Grout St Pancras is ideal for grouting up voids in rubble fill masonry or stone walls, amongst other low pressure grouting projects that require a high fluidity, early strength, structural grout.
Features
• Lime based, Portland cement free
• Long term durability and flexibility
• Factory supplied and quality controlled
• Suitable for low pressure injection grouting
Limelite Heritage Grout St Pauls
Tarmac
St. Pauls Grout is a low strength lime based grout for the
grouting of voids in heritage structures. The grout is
designed to have a low compressive strength and high
flexibility to provide similar properties to lime putty.
The grout is Portland cement free, breathable and salt
resistant.
A detailed investigation of the structure is always recommended prior to grouting especially where large areas are involved.
Limelite Heritage Grout St Pauls is ideal for grouting up voids in rubble fill masonry or stone walls, amongst other low pressure grouting projects that require a high fluidity, low strength grout.
Features
• Lime based, Portland cement free
• Long term durability and flexibility
• Factory supplied and quality controlled
• Extremely high fluidity
• Suitable for low pressure
Limelite Heritage Grout Winchester
Tarmac
Winchester Grout is a medium strength lime based grout for the grouting of voids in heritage structures.
The grout is designed to have a moderate compressive strength and high flexibility to provide similar properties to a hydraulic lime mortar once cured. The grout is Portland cement free, breathable and salt resistant.
A detailed investigation of the structure is always recommended prior to grouting especially where large areas are involved.
Uses
Limelite Heritage Grout Winchester is ideal for grouting up voids in rubble fill masonry or stone walls, amongst other low pressure grouting projects that require a high fluidity, moderate strength grout.
Features
• Lime based, Portland cement free
• Long term durability and flexibility
• Factory supplied and quality controlled
Limelite Heritage Lime Mortar
Tarmac
Limelite Heritage Lime Mortar is a cement-free blend of natural
hydraulic lime and selected aggregates. The mortar is highly workable and combines long term flexibility and breathability with durability. The mortar is available with two aggregate grades, 0.2 and 0.4, and a range of colours. Uses: Limelite Heritage Lime Mortar is used for bricklaying, blocklaying and stone masonry work in internal and external applications.
Limelite Lime Plasters, Mortars, Grouts
Tarmac
Limelite is a range of lightweight, breathable, easy to use plasters, mortars and grouts for use in restoration and to solve recurring damp and mould problems.
Limelite products work with the fabric of a building - letting walls breathe and providing a high quality, durable finish that protects and performs for years to come.
Limelite Lime Pointing Mortar
Tarmac
Limelite Lime Pointing Mortar is a cement-free blend of
natural hydraulic lime and selected aggregates with additives designed to improve the workability of the mortar when repointing. The mortar is highly workable and combines long term flexibility and breathability with durability.
Limelite LPB221 Lime Grout
Tarmac
LPB221 is a cement-free grout designed to be used as a void filler in listed monuments and historic buildings where minimal strength is required.
When mixed at the optimal WSR LPB221 has excellent fluidity and a high yield.
USES
LPB221 is designed for filling voids in open textured rubble filled walls using gravity fed or injection systems. This operation is normally needed when thick walls of double skin construction with rubble core filling have been subjected to the percolation of
water over many years. This washing action removes weak mortar thereby creating voids or allowing the loose fill to accumulate at the base of the wall causing a cracking, bulging or displacement of
stones.
The grout can also be used for general void filling where a minimal strength and the absence of cement
Limelite NHL Lime Binders
Tarmac
Tarmac Limelite is a range of Natural Hydraulic Limes conforming to EN 459-1.
We offer the following products:
Limelite NHL 3.5: A moderately hydraulic lime suitable for general-purpose use for mortar/pointing/rendering of most masonry types (above ground)
Limelite NHL 5.0: An eminently hydraulic lime suitable for use in masonry pointing, capping, foundations, sea/marine defences and new build construction (below DPC)
Our products contain no additives, mineral additions or Portland cement and are quality assured to EN 459-1: Natural Hydraulic Limes with independent third-party certification. CE Marked.
Limelite Natural Hydraulic Lime can be used for both the conservation and renovation of historic buildings, and in new build applications. They set with water and cure by carbonation
Limelite Renovating Plaster
Tarmac
Limelite Renovating Plaster is a lightweight and fibre reinforced renovating plaster that controls and manages moisture movement in traditional and damp buildings.
Easy to apply internal plaster that is not only breathable, salt resistant, fire resistant and reduces condensation & mould but has excellent thermal insulating properties.
Limelite Renovating Plaster works with the fabric of a building, letting walls breathe and provides a quality, durable finish that protects and performs for years to come.
This breathability enables substrate to dry naturally, meaning Limelite Renovating Plaster can be applied directly to wet walls to provide a fast and effective solution in both domestic and commercial properties, for flood damage remediation and heritage restoration within days
Limelite White Peak Lime Putty
Tarmac
White Peak Lime Putty is made from the finest Buxton quicklime.
Matured for a minimum of 4 months, it is ideal for the production of lime mortars, plasters and renders in restoration, conservation, heritage works
Lime putty has no hydraulic set (does not set by reaction with water). It hardens by absorbing carbon dioxide from the air. This process is slow and allows for small movements of buildings before the final set. Lime mortar made with lime putty is a very workable material and when hardened is more ductile than cement based mortars. This allows the building to continue to accommodate small movements. Lime mortars are also “breathable” and vapour permeable this helps in control of moisture in the building fabric. The bond strength of lime mortar is normally weaker than the fabric.
Showing 1-36 of 89